Bosch Tools TC10 10" Wet Tile Saw / Stone Saw
The TC10 includes:
- 1x Bosch TC10 10" Wet Tile / Stone Saw
- 1x Edge Guide
- 1x Auxiliary Table
- 1x Rear Water Extension Tray
- 1x Side Water Extension Tray
- 1x Water Pump
- 1x Blade Wrench
- 1x Hex Wrench
- Professional grade wet saw designed to tackle the most demanding stone and tile work
- 24" max rip cut capacity and 18" diagonal capacity gives you the versatility you need
- Rubberized table surface keeps the saw stable while working with larger tiles
- Stainless steel rails and precision ball bearing casters off smooth cutting action and increased accuracy
- Preset bevel stops of 22.5 deg. and 45 deg. for accurate, repeatable angle cuts
- Tool-free blade guard and arbor lock allow for quick blade changes
- Rugged cast aluminum base stands up to years of jobsite use
- Water tray is easy to remove and clean when needed
The TC10 is equipped with expanded rear and side extension water trays to prevent over-spray and optimize water retention; while a rear over-spray deflector helps reduce upward over-spray and keeps water within the tool. The tool's integrated and removable main water tray is designed with a drain plug and designated pump retainer, which quickly slides out to drain water or clean. The saw's large, sliding, rubberized table work surface provides better work piece balance and control, especially when working with large dimension tile. The TC10 has a 24 In. rip and 18 In. diagonal cut capacity, and can power through materials including porcelain, marble, granite, slate and travertine tile thanks to a 1.5 HP and 4200 RPM motor. Using a quick-adjust edge guide or bevel adjustment, the tool can be easily positioned to pre-set 22.5-degree and 45-degree stops for repetitive and straight or angle cuts. A must-have for general contractors, remodeler and light-commercial users looking for better cuts and less mess.
- Brand: Bosch
- Model: TC10
- MPN: TC10
- UPC: 000346433135
- Type: Wet Tile Saw / Stone Saw
- Amperage: 15.0
- Blade Diameter: 10.0"
- Cross Cut Capacity: 24"
- Depth of Cut: 3-3/4"
- Length: 33.25"
- Max Diagonal Cut: 18"
- Max Motor HP: 1.4 HP
- Max Vertical Cut: 3-1/4"
- No Load RPM: 4,200
- Voltage: 120V
- Weight: 75.0lb
- Width: 23.5"
- Package Qty.: 1
See the Bosch TC10 10" Wet Tile/Stone Saw In Action!
Overall Rating for Bosch Tools TC10 10" Wet Tile Saw / Stone Saw
|(no reviews)||Be the first to rate and review this item|