What it does is it organizes your cord into two seperate flexible chambers, one for each half. This allows you to access either end independently, and at all times. You can plug it in, go to work, and it unreels as you work. It winds up easily, because the ends wind past, not over each other, so they don't tangle. It works on anything flexible - extension cords, air hoses, flat cords, all the RV items like fresh water hose, antenna cables, and power cords. The CP-100 and CP-XL units are made out of the same material as pickup truck bed liners. They are formulated for outdoor use - good to minus 100 degrees.

Highlights:

• Simple and easy to use
• Stores and protects cord ends
• Lifetime limited warranty
• Also use for RV drinking water hoses, air hoses and antenna cable

Instructions:

1. To locate the center of cord, straighten cord and double it over itself until both ends are together.
2. Mark the center of cord with a marker.
3. At the eyelet tab, flex open one side wall and insert a cord end through the hole in the divider.
4. Flex open the opposite side wall and pull the cord end all the way through and out of opening.
5. Pull the cord through the Cordpro until the half-way mark is inside the unit. (Example: For 50 ft. cord, pull through 25 ft.)
6. Grip cushioned ridge with fingertips as shown. Wind the cord closest your opposite hand onto the Cordpro and tuck the cord end inside. Wind the remaining cord half in the same manner.

The PRO includes:

• Cord Pro CP-100 Cord Reel

Maximum capacities:

• 100 ft (30 m) 16/3 cord
• 80 ft (24 m) 14/3 cord
• 50 ft (15 m) 12/3 cord
• 40 ft (12m) 10/3 cord

How it Works!