Woodworking Machinery & Metalworking Machines 
Power Sanders Belt/Disc Sanders
Shop by Brand Delta Tools & Delta Machinery Delta Sanders Delta Belt/Disc Sanders
Delta 31-300 6" Belt/12" Disc Industrial Sanding Center
Looking for a mobile Base for this machine? Check out the Delta 50-293 Mobile Machinery Base
Expand all tabs
Collapse into tabsHighlights:
- 1-1/2 HP, 120/240 Volts TEFC motor
- Belt speed 3,000 SFPM
- Disc Speed 2,100 RPM
- Abrasive belt length 48"; width 6"
- Disc diameter 12"
- Belt 14-3/4" x 7-3/8" tilts +20º and -45º
- Disc 16-3/4" x 11-3/4" and tilts 0° to 45° up and down
- 4" dust collection diameter
This item ships via Common Carrier
, we will ship to a commercial location with a loading dock for our standard $6.50. Just select Standard $6.50 Ground
at checkout. Additional options, like a residential delivery or lift gate service will be additional charges. Please see our Shipping Information Page for further details.
Delta Rebates!!!
From November 1st 2009 until January 31st 2010, purchase the selected amount of Delta Merchandise and receive a free tool, via mail-in rebate direct from Delta!
Offer valid on purchases made from November 1st 2009 thru January 31st, 2010. Must be postmarked by February 28, 2010. Limited time offer. Valid in USA only. Reconditioned tools do not qualify.
The 31-300 includes:
- 31-300 Sanding Center
- Motor
- On/off switch
- Stand
- Dust collector connector
- 100 grit abrasive belt
- 80 grit abrasive disc
- Instruction manual
Features:
- Moveable deflector allows for more efficient dust collection
- Powerful 1 1/2 HP TEFC motor for long-lasting smooth performance; features manual thermal overload protector to prevent burn out
- Star-wheel, eccentric belt tracking control for easy, accurate belt alignment
- Sturdy steel stand for greater operating stability
- Sturdy, extra large, cast-iron tables are ribbed to prevent distortion and tilt 45° for bevel sanding. Positive stops at 0° - 45° with scale and pointer
- Milled table slots permit use of accessory miter gage for accurate straight and angle sanding
- Integral dust collector connector with single 4" diameter outlet
- Fully-machined and balanced steel disc for smooth, vibration free operation and proper adhesion of adhesive discs
Tech Specs:
- Motor: 1-1/2 HP, 120/240V, 60 Hz, 1 Phase, (wired for 120V)
- Abrasive Belt Size: 48" x 6"
- Belt speed: 3,000 SFPM
- Disc Speed: 2,100 SFPM
- Table Size:
- Belt Table: 15" x 7-1/2"
- Disc: 12" x 16-1/2"
- Miter Gauge Groove: 3/8" x 3/4"
- Table Tilt:
- Belt table: 45° down and 20° up
- Disc table: 45° down and up 20°
- Dust Port Diameter: 4"
- Width: 19"
- Length: 31"
- Height: 58"
- Weight: 290 lbs
Questions about the Delta 31-300 6" Belt/12" Disc Industrial Sanding Center? E-mail us.
For the past 30 years, Tools-Plus has committed itself to carrying the best hand tools, power tools, woodworking machinery, and accessories like the Delta 31-300 6" Belt/12" Disc Industrial Sanding Center above.
