Woodworking Machinery 
Table Saws Delta 36-981 Contractor's Saw
Shop by Brand Delta Power Tools Table Saws Delta 36-981 Contractor's Saw
Delta 36-981 Contractor's Saw
| Item#: | delta-36-981 |
| Condition: | New |
| Availability: |  Subject to manufacturer availability [*] |
| Our Price: | $749.00 |
Delta 36-981 10" Left Tilt Contractor's Saw w/ 30" Delta Unifence and Table Board
Expand all tabs
Collapse into tabsHighlights:
- Powerful 1-1/2 HP Horsepower - A comparable way of measuring the amount of power output of a motor or engine (1 horsepower = about 746 watts) induction An induction motor is a type of AC motor where rotating power is supplied by means of electromagnetic induction. No brushes motor handles tough cutting operations
- Large cast-iron table with cast-iron extension wings measures a full 40" x 27" for maximum material support
- Mobile base attaches directly to heavy-duty, wide-stance base for maximum saw support and mobility in the shop
- Under-table dust collection tray accommodates 4" dust hose hook-up for efficient dust and chip removal
- Deluxe T-slot miter gauge with adjustable stops at 45-degrees and 90-degrees
- Cast-iron blade carriage mounts directly to cast-iron table top for precise cutting and minimal vibration
- 0-45 degrees bevel tilts the blade away from the fence (left tilt) in ripping applications to prevent tearout on the outside corner of a mitered joint
- 115/230 Runs on either voltage. (Fyi 110,115 & 120 Volts are interchangable throughout the US but 220, 230 and 240 may not be) volts (wired 115 Volts)
This item ships via Common Carrier
, we will ship to a commercial location with a loading dock or a freight terminal near you for our standard $6.50. Just select Standard $6.50 Ground
at checkout. Additional options, like a residential delivery or lift gate service will be additional charges. Please see our Shipping Information Page for further details.
The 36-981 includes:
- 1-1/2 HP motor
- (2) cast-iron extension wings
- See-thru blade guard with splitter
- Miter gauge
- 10" saw blade
- V-belt arbor pulley
- Heavy-duty steel stand
- Mobility kit
- Dust collection insert
- 30" Unifence fence system
- Two legs
- Table board
Tech Specs:
- Blade:
- Diameter: 10"
- Arbor This refers to the mounting shaft (or recieving hole) diameter. They are straight (parallel) unless noted: 5/8"
- Speed: 3,000 RPM Revolutions Per Minute
- Capacity:
- Max. depth of cut at 90-degrees: 3-1/8"
- Max. depth of cut at 45-degrees: 2-1/8"
- Max. rip to right of blade: 30"
- Max. rip to left of blade: 13-1/2"
- Max. width of dado blade: 13-16"
- Blade tilt direction: Left
- Table:
- Main Table: 20" x 27"
- With Extension Wings: 40-1/2" x 27"
- General:
- Motor: 1-1/2 HP
- Type of Motor: Induction
- Motor Specs: 115V/230V, 60 Hz Hertz - Or cycle. Named after Heinrich Rudolf Hertz. One hertz (or cycle) simply means one per second
- Height: 39-1/2"
- Width: 40-1/2"
- Depth: 38-1/2"
- Foot print (less foot lever): 24-3/16" x 27-1/4"
Check out the rest of our...
Our Customers Are Saying...
