.
.
.
DAYS
HOURS
MINUTES
SECONDS
 

Delta 36-T30 30" T2 Fence System


Click Image to Enlarge
Item Number:36-T30
Line Code:DEL
Condition:New
Availability:In Stock
Usually ships within 1 day
Our Price:
$189.00
Shipping & Handling:
Free Shipping![more]

Delta 36-T30 30" T2 Fence System

If you have any pre-sales questions regarding Delta Tools and Machinery, feel free to contact customer/technical support at 1-877-832-4301....and don't forget to tell them Lucy sent you!

Expand all tabs

Collapse into tabs

Highlights:

  • The fence clamps securely to front tube and rear rail with an "L" Clip
  • Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
  • Projected aluminum face attaches to solid-steel angle iron and tubing
  • 3-point T square locking system is accurate with 1/64 of an inch
  • Added rear hold down support when using jigs and featherboards
  • Quick-removal fence can be located on either side of the blade for consistent ripping capabilities on left or right tilt saws
  • Includes everything needed for installation

Delta 36-T30 DELTA® T2 30" Fence System. This Delta T2 Fence System works with the 36-979 table saw and offers extreme accuracy. This fence system package includes guide tubes, front and back rails and a Delta T2 Fence.

The 36-T30 includes:

  • T-Square Commercial Fence
  • Steel Guide Tube w/Scale
  • Support Rail
  • Mounting Hardware

Tech Specs

  • Max Rip To Right Of Blade: 30 "
  • Max Rip To Left Of Blade: 13-1/2 "
  • Fence Height: 2-1/2 "
  • Length: Fence: 37"; Rail: 57-1/2 "

Need more information? Check out the 36-T30 Instructional Manual.

Looking for a Parts Breakdown of the 36-T30? Check it out here.

The Delta 36-T30 is a great T-Square style fence, and a real bargain at this price. The Delta 36-T30 fence comes as standard equipment on select Delta Contractor and Hybrid Saws. We believe that it is the perfect choice when looking to upgrade your table saw fence system. With a little ingenuity, it can be adapted to many table saws on the market today, so many in fact that it would be impossible to list them all here.

The simple logic behind fitting this new Fence and Rail kit:

The rail needs to mount onto the front lip (usually this surface is vertical, but wedge shimming is acceptable) of the table and again on the front lip of the extension wings (which both may need to be drilled out to accommodate the rail). Many wings are cast with an open pattern and others are stamped out of sheet metal.

There just needs to be enough meat and strength to keep the fence from loosening (or deflecting) once the rail is mounted.

To further be sure of fitment use this guide below:

36-T30 Installation Schematic Image
  1. Is the distance between these two points over 18"?
    • The angle iron rails extend 18" to the left of the saw blade. If the saw has a cast iron wing, the distance should be between 18" - 20". If the saw does not have a wing, the system will still work as long as the customer fills in the area with an additional extension table.
  2. Is this distance between 3.25" and 8.25"?
    • This is the minimum distance for the miter slots in the saw to clear the cutouts in the rails.
  3. Is this distance between 3.25" and 8.25"?
    • This is the maximum distance for the miter slots in the saw to clear the cutouts in the rails.
  4. Is the distance between these two points over 23"?
    • This is the minimum distance needed so that the pad on the fence will still ride on the saw table.
  5. Is this distance less than 17.5"?
    • This is the maximum distance between the miter slots (outside to outside) that will clear the cutouts in the rail.
  6. Is the table at least 1.5" thick?
    • The is the minimum thickness on the main cast iron table top to safely allow the customer to drill new holes in the lip of the saw.
  7. Is your table top cast iron?
    • The main tabletop should be cast iron. There should be left and right extension wings heavy duty enough to be able to be mount (by possibly drilling holes for the bolts) the rail and provide ongoing support without deflecting or loosening.
Overall Rating for Delta 36-T30 30" T2 Fence System
(no reviews)Be the first to rate and review this item


For the past 30 years, Tools-Plus has committed itself to carrying the best hand tools, power tools, woodworking machinery, and accessories like the Delta 36-T30 30" T2 Fence System above.

RELATED ITEMS
Delta 36-055 Unisaw Feather Board
Delta Tools & Machinery Logo

Delta 36-055 Unisaw Feather Board

  • Universal T-Track compatibility for improved cut control
  • Design allows stock to pass in one direction and cause resistance if moved in other direction
  • Aids in preventing kickback
$16.99
In Stock
Qty:
Check out the rest of our...
Our Customers Are Saying...

Bill Me Later from Paypal


Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Blog ImageFacebook ImageTwitter Image


Tools-Plus.com Customer Comments