Delta 36-T30 DELTA^® T2 30" Fence System. This Delta T2 Fence System works with the 36-979 table saw and offers extreme accuracy. This fence system package includes guide tubes, front and back rails and a Delta T2 Fence.

Highlights:

• The fence clamps securely to front tube and rear rail
• Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
• Projected aluminum face attaches to solid-steel angle iron and tubing
• 3-point T square locking system is accurate with 1/64 of an inch
• Added rear hold down support when using jigs and featherboards
• Quick-removal fence can be located on either side of the blade for consistent ripping capabilities on left or right tilt saws
• Includes everything needed for installation

The 36-T30 includes:

• T-Square Commercial Fence
• Steel Guide Tube w/Scale
• Front & Rear Support Rails
• Mounting Hardware

Tech Specs

• Max Rip To Right Of Blade: 30 "
• Max Rip To Left Of Blade: 13-1/2 "
• Fence Height: 2-1/2 "
• Length: Fence: 37"; Rail: 57-1/2 "

The Delta 36-T30 is a great T-Square style fence, and a real bargain at this price. The Delta 36-T30 fence comes as standard equipment on select Delta Contractor and Hybrid Saws. We believe that it is the perfect choice when looking to upgrade your table saw fence system. With a little ingenuity, it can be adapted to many table saws on the market today, so many in fact that it would be impossible to list them all here. For more information, check out the Manual.

Robert, from Grand Rapids, Michigan bought the 36-T30 30" T2 Fence System. Here's what was said about it:

After trying to make a decision as to whether to buy a new table saw or upgrade my old Craftsman saw I decided to try the Delta T2 36-T30 rip fence. Upon calling Tool Plus they checked and told me that it was out of stock but would call Delta to see if they could drop ship it to me. Soon I got a call back and was told they could ship immediately. Well this was late in the week before Labor day so I thought it would be delayed a long time. I received the fence in just a week after ordering even with the holiday. After unpacking and arranging I thought wow this is going to be easy to install. All I had to do was drill 4 holes in the table saw after a few measurements. I had the fence up and running in barely an hour. If anyone wants to upgrade a fence on a Craftsman table saw I without spending a fortune on a Biesmeyer I would never hesitate to recommend the T2 fence and rail system and most importantly Tools-Plus as the best supplier and best price.

Tom, from Raleigh, North Carolina bought the 36-T30 30" T2 Fence System. Here's what was said about it:

I am impressed! You were considerably cheaper then anything on "The Big Name Site". Your shipping charge was most reasonable, and I received the table saw fence in a timely manner. Great job!

Bill, from Long Beach, California bought the 36-T30 30" T2 Fence System. Here's what was said about it:

Installation of the rip fence was easy, the instructions were easy to follow and the end result was a fence that is spot on square with the blade every time. This is a great improvement to my Delta Contractors saw.

-Bill