Highlights:

• 3 HP, 3ph, 220,230/460 Volts 3450 RPM
• Cutting width 12"
• 3 knives cutterhead
• 5,000 RPM 15,000cpm
• Table length 84''
• Tilts in and out 45º
• Net weight 706 lbs.

Delta Rebates!!!

From November 1st 2009 until January 31st 2010, purchase the selected amount of Delta Merchandise and receive a free tool, via mail-in rebate direct from Delta!

Offer valid on purchases made from November 1st 2009 thru January 31st, 2010. Must be postmarked by February 28, 2010. Limited time offer. Valid in USA only. Reconditioned tools do not qualify.

Get the rebate!

The 37-360 includes:

• Delta 37-360 Jointer
• 3 HP motor, 3 phase motor
• Set of three knives
• Cutterhead assembly
• Cutterhead guard
• Wrenches
• Rabbeting ledge
• Tilting fence
• Push blocks

Features:

• Versatile 5-1/2" x 47" fence tilts in and out at 45° and features positive stops at both 45° and 90°
• Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine
• Rack and pinion movement for smooth, precise adjustment
• Large 3-7/8" diameter, 3-knife cutterhead operates at 5000 RPM for producing 15,000 cuts per minute
• Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed
• English/Metric depth-of-cut scale is an accurate guide for measuring cutting depth
• The infeed and outfeed tables are constructed of cast iron and are heavily ribbed underneath for solid support
• A built-in rabbeting ledge lets you make rabbet cuts up to 3/4" deep
• Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between the table and cutterhead for safer, more efficient cutting
• Pushbutton on/off switch is positioned high above the table for reaching easily and safely
• Replaceable ductile iron-serrated table lips for noise reduction
• Dust hood with 5" diameter outlet accepts dust collection systems for collecting dust and chips
• Hinged door and removable door panel allow for easy access to the motor and V-belts

Tech Specs:

• Motor: 3 Phase, 3 HP, 3,450 RPM, 220-240/460V (Wired 220V), 60 Hz
• Cut Capacity - Width: 12"
• Cut Capacity - Depth: 3/4"
• Rabbeting Capacity: 3/4"
• Cutterhead Speed: 15,000 CPM; 5,000 RPM
• Number of Knives: 3
• Cutterhead Diameter: 3-7/8"
• Table:
  • Length: 84"
  • Length of front table (Infeed): 41-1/2"
  • Length of Rear table (Outfeed): 41-1/2"
  • Width: 13"
  • Height: 32"
• Fence:
  • Size: 5-1/2" x 47"
  • Tilt: In and Out 45°
  • Positive Stops: In and Out 90°, 45°
• Dust Port Diameter: 5"
• Dimensions:
  • Length: 84"
  • Width: 40"
  • Height: 43"
  • Weight: 706 lbs

Bob, from Richmond, Texas bought the 37-360 12" DJ-30 Industrial Jointer. Here's what was said about it:

I just received my Delta jointer. I want to say not only is Tools-Plus' the price the best I could find, but the shipping charges where outstanding!!!!! I have never been able to order something of any size and have it shipped from so far for so cheap. Your tracking system is awesome, I received my jointer when I was told I would receive it AND it was damage free. I deal with U.P.S. everyday at work and have not seen them handle a box with white gloves like did this one, it looked like I brought it home from the store. You guys at Tools-Plus must have some kind of pull with them. Tools-Plus is definitely on the top of my list for any web site ordering I do in the future!