Highlights:

• 1-1/2 HP, 120/240 Volts, 60Hz., 1ph
• 3,450 RPM
• Cutting capacity 8" width x 5/8" depth
• 5/8" rabbeting capacity
• Cutterhead speed 5500 RPM, 16,500 cpm w/ three knives
• Runs on sealed, lubricated ball bearings
• 32" outfeed, 42" infeed

The Delta 37-365X DJ-20 Jointer is one of the most successful and most recognized machines of the 8" parallelogram jointers. For almost two decades, the DJ-20 has been the first choice for those looking to make the step up from a 6" machine. The parallelogram table adjustment system allows both tables to be moved in a tight arc around the cutterhead, making for a quieter, safer and cleaner cut. The parallelogram design also offers finer bed support than traditional gibbed way jointers, and the extra support allows for longer tables without the worry of the beds sagging. The jointer head is machined from high-quality iron castings that are ground to a smooth surface free of any drag from table defects. The fence is also of the same excellent quality construction, designed to be longer than traditional lengths, providing more surface area support when working with oversized stock. A total bed length of over 7 feet makes for exceptional support when surfacing stock, eliminating the worry of the trailing edge sagging over the table edge. The cutterhead on the DJ-20 is a precision machined three knife gibbed cutterhead of the three knife variety; spinning at 5000 RPM's producing a cutting speed of 16,500 cuts per minute, producing an extra smooth cut. The Delta jointer head is seated atop a large thick gauge steel stand. The larger footprint allows easier and more precise leveling of the machine, and makes for a sturdier machine platform. The unit is powered by a 1 ¹/₂ HP TEFC Induction dual voltage 120/240 volt motor for ample cutting power in all woods.

The 37-365X includes:

• Delta 37-365X 8" Jointer
• 1-1/2 HP, 60 Hz, single phase motor
• 3-knife cutterhead module
• Cutterhead guard
• Wrenches
• Rabbeting ledge
• Tilting fence
• Push blocks
• Two pulleys

Features:

• Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker
• Cast-iron assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings
• Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted and functions as a rear guard on narrow cuts
• Modular cutterhead provides a consistently clean cut. Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time
• Extra-long infeed table provides a full 76-1/2" of work support
• Runs on sealed, lubricated-for-life ball bearings
• 5 Year Warranty. All X5 series tools are backed by a "best in class" 5 year warranty. That is 3-4 years longer than other brands.

Tech Specs:

• Motor: 1-1/2 HP, 120/240V (Wired 240V), 60 Hz, 1 Phase TEFC, 3,450 RPM
• Cut Capacity - Width: 8"
• Cut Capacity - Depth: 5/8"
• Rabbeting Capacity: 5/8"
• Cutterhead Speed: 16,500 CPM; 5,500 RPM
• Number of Knives: 3
• Cutterhead Diameter: 3-3/8"
• Table:
  • Length: 76-1/2"
  • Length of front table (Infeed): 42"
  • Length of Rear Table (Outfeed): 32"
  • Height: 32"
• Fence:
  • Size: 5" x 35"
  • Tilt: In and Out 45°
  • Positive Stops: In and Out 90°, 45°
• Dust Port Diameter: 4"
• Dimensions:
  • Length: 76.5"
  • Width: 26"
  • Height: 32"
  • Weight: 394 lbs