Delta JT160 6" Variable-Speed Bench Jointer
Delta JT160 6" Variable-Speed Bench Jointer
Bob from Dallas, GA just received his Delta JT160 Jointer and writes:I find the Delta JT160 Jointer to be a great addition. The instructions said it would take 30 minutes to put together. After about 20 minutes I was plugging it in and ready to go. It took some trial and error, an article from the latest edition of Wood Magazine (what timing) about the Delta Jointer and a call to my local Woodcraft Store and I had joined 2 pieces of 5/4 oak and 2 of 3/4 oak fairly easy. It is all in where you apply the pressure when running your wood across the blades. Like any other tool, it takes time to perfect a process but I feel confident with the quality and ease of operation of this Delta JT160 Jointer. I wish I had one of these when I first started woodworking some of my earlier projects would have been easier to build and the end product would have turned out even nicer. I appreciate Tools Plus' replies, a lot of business's sell something to you and that's it, you never hear anything back. I am impressed with Tools PLus and you for your customer service and friendliness.
Expand all tabs
Collapse into tabsHighlights:
- 10 Amp, 120 Volts, variable speed motor
- 2-knife cutterhead
- 6-1/8" x 1/8" max cutting capacity
- 12,000 - 22,000 cpm / 6,000 - 11,000 RPM
- 6-3/16" x 30" table
- 4-1/4" x 19-3/4" fence tilts 45º out
- Positive stops at 90° and 45°
Delta Rebates!!!
From November 1st 2009 until January 31st 2010, purchase the selected amount of Delta Merchandise and receive a free tool, via mail-in rebate direct from Delta!
Offer valid on purchases made from November 1st 2009 thru January 31st, 2010. Must be postmarked by February 28, 2010. Limited time offer. Valid in USA only. Reconditioned tools do not qualify.
The JT160 includes:
- 2 knife cutterhead
- Cutterhead guard
- Push blocks
- Wrenches
- Instruction manual
Features:
- Variable speed range allows you to select the right speed for the size and hardness of the material you're cutting
- Center-mounted fence gives needed support throughout the cut for accurate edge jointing
- Fence tilts 0° to 45° outward for bevel jointing & chamfering
- Poly-V belt drive for maximum transmission of power to cutterhead with minimum belt slippage
- Balanced cutterhead for smooth operation and maintenance-free life
- Two-knife cutterhead with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives
- Built-in cutterhead lock facilitates knife replacement and adjustment
- Convenient, infeed table raising/lowering control with dual English/Metric scale facilitates depth of cut adjustment; lock knob securely holds desired setting
- Built-in chip chute directs dust and chips away from operator, motor and electricals
- Rubber base pads minimize operating vibratoin and dampen noise level
Tech Specs:
- Motor: 10 Amp, 120V, AC, 60 Hz
- Cut Capacity - Width: 6-1/8"
- Cut Capacity - Depth: 1/8"
- Cutterhead Speed: 12,000 to 22,000 CPM; Variable-Speed 6,000 to 11,000 RPM
- Number of Knives: 2
- Table:
- Length: 30"
- Width: 6-3/16"
- Height: 13-1/2"
- Fence
- Size: 4-1/4" x 19-3/4"
- Tilt: Out 45°
- Positive Stops: 90° and 45°
- Dimensions:
- Length: 30"
- Width: 18"
- Height: 13.5"
- Weight: 35 lbs
Questions about the Delta JT160 6" Variable-Speed Bench Jointer? E-mail us.
For the past 30 years, Tools-Plus has committed itself to carrying the best hand tools, power tools, woodworking machinery, and accessories like the Delta JT160 6" Variable-Speed Bench Jointer above.
RELATED ITEMS
Check out the rest of our...
Our Customers Are Saying...
