Highlights:

• 1-1/2 HP, 120/240 Volts motor
• Automatic blade brake
• 10" blade diameter, 5/8" arbor
• 2-3/4" maximum depth of cut at 90°
• 2-1/2" maximum depth of cut at 45° bevel
• 16" crosscut
• 2-year warranty

The Delta RS830 radial arm saw is the perfect radial arm saw for the home shop of any size. The 10" blade provides 2-3/4" cutting depth at 90 degrees. This Delta radial arm saw is capable of using any 5/8" bore saw blade, as well as a 6" stacked dado set. a handle mounted power switch provides convenient access for powering up or turning off the saw without fumbling under the table for a button. The arm assembly is constructed of one solid, ribbed iron casting with precision ground tracks. The column support is also a solid casting for minimal vibration during use. The saw sits on a heavy welded steel frame for maximum rigidity. The saw is powered by a specially designed 1-1/2 HP TEFC induction motor capable of being wired for 120/240 volts. The motor also features dual threaded shafts to accept various accessories to expand the uses your saw can be put to.

The RS830 includes:

• 10" Saw blade
• Blade wrenches
• Instruction manual
• Stand

Features:

• Miter cutting capacities in nominal 2" thick stock have also increased 10-1/2" at 45° left and 11" at 45° right
• Miter scale has large 0° to 45° markings left and right for easy selection of miter setting
• Cast-iron track, column and column support for rigidity and continued accuracy
• New depth-of-cut control handle locking levers are positioned above the table for easy access
• Easy-to-read inboard and outboard rip scale
• Automatic blade brake stops blade in seconds
• Extra-large, 27" x 44" table provides support for wide panels or large work pieces
• Steel stand for sturdy support
• New design provides greater cutting capacity for cross-cutting nominal 2" thick stock up to 16" wide

Tech Specs:

• Motor: 1-1/2 HP, 120/240V, (wired 120V), 1 Phase, 60 Hz
• Motor Control: On-off, key lock switch
• Blade Diameter: 10"
• Arbor Size: 5/8"
• Crosscut Capacity (1" depth of cut): 16"
• Miter at 45° R & L (1" depth of cut): L: 10-1/2"; R: 11"
• Depth Of Cut At 90 Degrees: approx. 2-3/4"
• Max. 45 Degree Bevel Cut: approx. 2-1/2"
• Bevel Stops: 0°, 45° and 90°
• Miter Stops: R & L 0° and 45°
• Table Size: 27" x 44"
• Table Height: 33-3/4"
• Dimensions
  • Height: On stand: 57"
  • Width: 44"
  • Length: 34"
  • Weight: 166 lbs

Coming Soon!