You're currently browsing our

DeWalt Cordless Impact Tools

section within our DeWalt Tools department

Impact Wrenches (sometimes called an impactor, torque gun or rattle gun) and Impact Drivers work by spinning a rotating mass (the hammer) inside of the tool, this then strikes the output shaft (the anvil) transferring the energy from the hammer and producing high torque output. The hammer is not stopped by the anvil and continues to rotate freely resulting in many impacts per second. One huge advantage to impact wrenches and impact drivers is that even though the tool applies a huge amount of torque to the job at hand, not much of that torque is felt by the tool user. Normally there will need to be a certain amount of resistance in the job being done before the hammering action will kick in. This is extremely useful because it allows bolts and nuts to be driven very fast, and then brings on the force when you need to set the fastener.

With the growing popularity of impact tools there is also a growing need for impact driver bits, impact drill bits and impact sockets that can stand up to the power of these drivers. Standard driver bits, drill bits and sockets are made from strong, but brittle steel, impact tools can easily shatter these, sometimes with explosive results. Milwaukee Shockwave and DeWalt Impact Ready accessories however are made with special alloys specifically designed to hold up to the high torque exerted by impact tools and last up to 10 times longer than traditional bits not designed for these specific applications.

Typically Impact Wrenches have a square shank whereas an Impact Driver would have a Hex Shank. Luckily you don't have to buy both tools to take full advantage, many manufacturers are making hex to square and square to hex adapters.. With the new types of accessories coming out such as Impact Driver Hole Saws, and Impact Drill Bits, owning an adapter so that you can use Hex Shank Accessories on your Square Shank Tool or vice versa is a good idea.

DeWalt Hex Nose Cordless Impact Tools
DeWalt DC825KA Heavy-Duty 1/4" (6.4mm) 18V Impact Driver Kit
DeWalt Tools Logo

DeWalt DC825KA Heavy-Duty 1/4" (6.4mm) 18V Impact Driver Kit

  • Frameless motor
  • Compact size & weight
  • 1,330 in-lbs of torque
$249.00
View Item
DeWalt DC845KA Heavy-Duty 1/4" (6.4mm) 12V Impact Driver Kit
DeWalt Tools Logo

DeWalt DC845KA Heavy-Duty 1/4" (6.4mm) 12V Impact Driver Kit

  • Frameless motor for extended tool durability and life
  • Compact size & weight allows access into tighter areas and reduces user fatigue
  • 1,150 in-lbs of torque to perform a wide range of fastening applications
$229.00
View Item

View discontinued DeWalt Hex Nose Cordless Impact Tools

DeWalt DW052K-2 Impact Driver Kit
DeWalt Tools Logo

DeWalt DW052K-2 1/4" 12 Volt Impact Driver Kit

  • No longer available...
  • Consider the DC845KA
DeWalt DW056K-2 Impact Driver Kit
DeWalt Tools Logo

DeWalt DW056K-2 1/4" 18 Volt Impact Driver Kit

  • No longer available...
  • Consider the DC825KA
DeWalt Square Nose Cordless Impact Tools
DeWalt DC820KA Heavy-Duty 1/2" (13mm) 18V Impact Wrench Kit
DeWalt Tools Logo

DeWalt DC820KA Pin Detent Heavy-Duty 1/2" (13mm) 18V Impact Wrench Kit

  • 18 Volts cordless
  • 1/2" square with pin detent retention
  • 0-2,400 RPM/0-2,700 IPM for faster application speed
$239.00
View Item
DeWalt DC821KA 18V 1/2" (13mm) High Performance Impact Wrench Kit
DeWalt Tools Logo

DeWalt DC821KA 18V 1/2" (13mm) High Performance Impact Wrench Kit

  • Heavy-Duty DEWALT-built motor provides long life under continuous heavy use conditions
  • 0-2,100 RPM/0-3,000 IPM for fast application speed
  • Durable all-metal gear case and transmission provide jobsite-tough durability
$287.50
View Item

View discontinued DeWalt Square Nose Cordless Impact Tools

Top Sellers in This Category
Tool-A-Rama Slideshow Image
Tools-Plus.com Customer Comments

Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order

Sign Up for the
Tool-Talk Newsletter!

All new and created for you! Tool Talk is a periodic newsletter featuring exclusive discounts, how-to's and all the info on new and upcoming deals. Subscribe and save!



Tool Talker Blog Image

New Product Videos!

Watch videos of new products and exclusive product demonstrations.

Watch the Videos

Tool Plus Twitter Banner