Drill Press 9400

Infinitely Variable Speed

Features

• Variable speed from 0 to 1200 RPM
• Adjust speeds while operating in the material
• High torque A force at an angle that causes rotation, also known as "rotational force" or "angular force" at low RPM speeds
• Instantaneous reversing for tapping
• Tapping head is not needed
• Machine tap goes into ball bearing chuck
• Can tap either left or right handed threads
• Drill head and table rotate 360° around column
• Smooth operating table raiser
• Fully enclosed spindle
• Quill lock and depth control
• Same ball bearing chuck holds both drill and tap

Speed control

• Continuous speed adjustment while in operation
• Instantaneous reversing for tapping
• One turn on knob for adjusting speed (0 to 1200 RPM)

Specifications	Ellis 9400 Drill Press
Motor	2 HP A.C. single phase-choose 110/220 Runs on either voltage. (Fyi 110,115 & 120 Volts are interchangable throughout the US but 220, 230 and 240 may not be)
Control box	Infinitely variable speed with a turn of the dial Instantaneous electronic reversing Full torque at low speeds All solid state circuitry Continuous speed adjustment while in operation
Spindle speeds	0 – 1200 RPM
Drills to center	18-1/8”
Drilling capacity	steel 1-1/16” cast iron 1-1/4”
Tapping capacity	3/4”
Morse taper	No. 3
Quill diameter	3”
Column diameter	4”
Spindle travel	5-3/8”
Spindle to table (max.)	27-1/4”
Spindle to base	46-1/4”
Shipping weight	675 lbs
Table	production type: t- slotted 15 7/8” X 17-7/8” 2 Slots for 1/2” t-bolts ground working surface coolant trough
Base	t- slotted 16-3/8” x 26-5/8” 2 slots for 1/2” t-bolts ground working surface
Size	height 69-1/2” width 20” depth 29”
Options	ball bearing chuck 4-1/4"drill press vise 13" drill press vice power down feed

Ellis also makes (in the USA)

Horizontal - Vertical Band Saws that Miter

and an Awesome Belt Grinder (sands also)