Woodworking Machinery 
Spindle Sanders General Woodworking Machinery 15-020M1 Oscillating Spindle Sander
Shop by Brand General Woodworking Machinery Spindle Sander General Woodworking Machinery 15-020M1 Oscillating Spindle Sander
| Item#: | general-woodworking-machinery-15-020m1 |
| Condition: | New |
| Availability: |  A stock item usually ships in 1 to 3 days |
| Our Price: | $1,199.00 |
General Woodworking Machinery 15-020M1 Oscillating Spindle Sander W/ 10 Spindles
Highlights:
- 75 OPM Oscillations Per Minute ~ 1725 RPM Revolutions Per Minute
- 1-1/2"(39mm) length of oscillation
- Table size 24-1/4" X 24-1/4" (616 X 616 mm Millimeter
1 millimeter = 0.1 centimeters
1 foot = 304.8 millimeters
1 inch = 25.4 millimeters) - Table tilt 0º to 45º
- 3 table inserts
- 1/4" TO 4" (6. 2 TO 102 mm) spindle sizes
- 1 HP Horsepower - A comparable way of measuring the amount of power output of a motor or engine (1 horsepower = about 746 watts), 115/230 Runs on either voltage. (Fyi 110,115 & 120 Volts are interchangable throughout the US but 220, 230 and 240 may not be) Volts, 1 ph, (10 / 5 Amp Amperes - A comparable measure of electricity consumption or output. (Amps x Volts = Watts)) (pre-wired 230 Volts)
- 343 lbs. (156 kg)
This item ships via Common Carrier
, we will ship to a commercial location with a loading dock or a freight terminal near you for our standard $6.50. Just select Standard $6.50 Ground
at checkout. Additional options, like a residential delivery or lift gate service will be additional charges. Please see our Shipping Information Page for further details.
The 15-020M1 includes:
- One General International 15-020M1 oscillating spindle sander
- Heavy duty stand
- Ten interchangeable spindles from 1/4" to 4". See sizes below
|
||
|
ITEM # |
SIZE |
DRUM |
|
15-021 |
1⁄4” x 5” (6 x 127 mm) |
STEEL |
Features:
- Heavy cast iron table and base
- Three (3) interchangeable table inserts
- Heavy duty oil bath gearbox
- Dust hood is built under the table
- Precision ball bearing in spindle for smooth and solid performance
- Precision ground tilting table
- Oil level sight gauge to allow instant check of oil level during operation
- Key switch with circuit breaker for overload protection
- 1" to 4" spindle comes with rubber drum
- 10 interchangeable spindles from 1/4" to 4":
- 1/4"
- 3/8"
- 1/2"
- 5/8"
- 3/4"
- 1"
- 1-1/2"
- 2"
- 3"
- 4"
