General Woodworking Machinery 15-257 180 Grit Pre-Cut Abrasive Strip
- Fits General 15-250 Dual Drum Sanders
- 180 grit for various sanding applications
- See owner's manual for installation instructions
How to Adapt Drum Sand Abrasive Strip to fit General 15-250 Drum Sander
- Make sure you have at least a 111"L x 4"W Abrasive Strip (of desired grit). The proper woodworking strips will be aluminum oxide and closed coat.
- Use a pencil to put a tick mark 14.5" from each end of the abrasive strip
- Using a ruler and a pencil, draw a diagonal line on the back of the abrasive strip from the 14" tick mark to the corner on the end of the abrasive strip
- Using a pair of scissors, cut along this line so that you are left with cut that tapers off to nothing at the end of the strip (see photo above for an example).
- IMPORTANT — Make sure each end of the abrasive strips are cut to opposite sides so that when you put them together they make a complete 4" strip again (see photo below).
The 15-257 includes:
- General Woodworking Machinery 15-257 Pre-Cut Abrasive Strip
UPC - 626708152577
Overall Rating for General Woodworking Machinery 15-257 180 Grit Pre-Cut Abrasive Strip
|(no reviews)||Be the first to rate and review this item|