You're currently browsing our

Engine and Chassis Tools

section within our Hand Tools department

Many automotive projects require a very specific set of tools in order to effectively complete the job. Tools-Plus offers a variety of engine and chassis tools that will allow both professionals and hobbyists to work safely and efficiently. Oil filter wrenches, spark plug wire pullers, bearing separators and other specialty tools will allow you to get the job done safer and faster with less chance of damage to surrounding parts.

Astro Pneumatic 7802 Tie Rod/Pitman Arm Adjusting Tool Set
Astro Pneumatic Tools Logo

Astro Pneumatic 7802 Tie Rod/Pitman Arm Adjusting Tool Set

  • Facilitates 360-degree rotation of adjusting sleeve in tight areas
  • Blow molded case keeps the tools organized and easy to transport
  • Accomodates a 1/2" drive ratchet or breaker bar.
$29.99
View Item
Special for this item!
Astro Pneumatic 7846 Harmonic Balancer Puller Set Model
Astro Pneumatic Tools Logo

Astro Pneumatic 7846 Harmonic Balancer Puller Set Model

  • Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys
  • Can be used on tapped fly wheels of electric or two-cycle motors.
  • Heavy duty 4-way slotted yoke
$49.95
View Item
Special for this item!
Astro Pneumatic 78618 Brake Caliper Wind Back Set (Left & Right hand)
Astro Pneumatic Tools Logo

Astro Pneumatic 78618 Brake Caliper Wind Back Set (Left & Right hand)

  • Adaptor plates with thrust bolt assembly and reaction plate are precisely made
  • Prevents damaging pistons and seals
  • Updated adaptor set applicable for side variety of vehicles
$37.88
View Item
Special for this item!
Astro Pneumatic 78619 Brake Caliper Wind Back & Pro Adapters
Astro Pneumatic Tools Logo

Astro Pneumatic 78619 18 Piece Brake Caliper Wind Back & Pro Adapters

  • Allows you to address a wide range of vehicle applications with a complete set of adaptors
  • Equipped with both left-handed and righ-handed thrust bolt assemblies
  • Designed for push back and wind back brake pistons
$56.50
View Item
Special for this item!
Astro Pneumatic 78625 GM Water Pump Holding Tool - 2.2L + 2.4L Ecotech
Astro Pneumatic Tools Logo

Astro Pneumatic 78625 GM Water Pump Holding Tool - 2.2L + 2.4L Ecotech

  • Tool allows user to access plate easily from front cover
  • Also allows user to install the tool to hold timing chain in place
  • For use in various Chevrolet, GM, Oldsmobile, Pontiac and Saturn platforms
$29.95
View Item
Special for this item!
Astro Pneumatic 7865 Ball Joint Service Tool
Astro Pneumatic Tools Logo

Astro Pneumatic 7865 Ball Joint Service Tool with 4-wheel Drive Adapters

  • Excellent for the removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins for 2WD and 4WD vehicles
  • Removes even rusted and corroded parts
  • Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
$67.99
View Item
Special for this item!
Astro Pneumatic 7868 Master Ball Joint Adapter Set
Astro Pneumatic Tools Logo

Astro Pneumatic 7868 Master Ball Joint Adapter Set

  • Works on press-fit upper and lower ball joints
  • Blow molded case keeps the tools organized and easy to transport
  • Set also includes live center forcing screw plug
$59.00
View Item
Special for this item!
Astro Pneumatic 78930 15 Piece Master Disconnect Kit
Astro Pneumatic Tools Logo

Astro Pneumatic 78930 15 Piece Master Disconnect Kit

  • Includes Fuel and Transmission Line Disconnect Set
  • Includes Oil Cooler Line Remover
  • Includes Air Conditioning and Fuel Line Disconnect Tool Set
$34.95
View Item
Special for this item!
Astro Pneumatic 7897 Master Ball Joint Service Kit
Astro Pneumatic Tools Logo

Astro Pneumatic 7897 Master Ball Joint Service Kit

  • Works on press-fit upper and lower ball joints
  • C-frame press alone can be used to remove and replace universal joints
  • Blow molded case keeps the tools organized and easy to transport
$109.00
View Item
Special for this item!
Astro Pneumatic 9409A Hose Clamp Pliers
Astro Pneumatic Tools Logo

Astro Pneumatic 9409A Hose Clamp Pliers

  • Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm - 54mm)
  • Precision clamp on end of flexible cable allows for extended reach where other models cannot reach
  • Pliers can be locked, freeing up your hands and making your job easier and faster
$39.95
View Item
Special for this item!
Lisle 53250 Oil Filter Wrench
Lisle Auto Tools Logo

Lisle 53250 Extra Large Oil Filter Wrench

  • Has a 4-1/8" to 4-1/2" range
  • 1" stainless steel band
  • Swivel handle provides clearance from obstructions
$8.95
View Item
Proto Tool JFC1463 Wheel Torque Extension Kit
Proto Tools Logo

Proto Tool JFC1463 5 Piece Wheel Torque Extension Kit

  • Designed to torque wheel nuts on foreign and domestic cars and light trucks
  • For use with thin wall or impact lug nut sockets
  • Includes wall chart and custom case
$167.41
View Item
Special for this item!
Proto Tool JFC1503 Wheel Torque Master Kit
Proto Tools Logo

Proto Tool JFC1503 9 Piece Wheel Torque Master Kit

  • Designed for use with a 1/2-inch drive impact wrench
  • Comes with a color wall chart and custom case
  • Includes 55 ft-lb, 80 ft-lb 17 mm sockets, 65 ft-lb, 80 ft-lb, 100 ft-lb 3/4" sockets, 80 ft-lb 21 mm socket, 100 ft-lb 13/16" socket, 120 ft-lb 7/8" socket, and 140 ft-lb 1/2" socket.
$217.44
View Item
Special for this item!
Proto Tool JFE14289 Fleet Charger
Proto Tools Logo

Proto Tool JFE14289 12V/24V Fleet Charger

  • Commercial quality jump starter designed for heavy-duty and over the road jump starting applications
  • Built-in automatic 10 Amp battery charger
  • 12/24 volt settings
$2,543.72
View Item
Special for this item!
Proto Tool JFEH6006 Fleet Charger
Proto Tools Logo

Proto Tool JFEH6006 6V/12V/24V Fleet Charger

  • UL/CUL/CSA approved for indoor/outdoor use
  • 455 amp manufacturers boost rating
  • 255 amp UL continuous assist rating
$593.70
View Item
Special for this item!
Proto Tool JFF1700 Complete Auto Cooling System Tester
Proto Tools Logo

Proto Tool JFF1700 23 Piece Complete Auto Cooling System Tester

  • For cars and light trucks
  • Pump attaches to filler neck
  • 17 adapters included (one is dual adapter)
$439.26
View Item
Special for this item!
Proto Tool JFF600 Large Truck Cooling System Adapter Kit
Proto Tools Logo

Proto Tool JFF600 6 Piece Large Truck Cooling System Adapter Kit

  • Compatible with most cooling system pressure generating pumps
  • Includes six cooling system adapters
  • Large trucks with "B" half turn twist on filler neck
$185.34
View Item
Special for this item!
Proto Tool JFF730MA Cooling System Pressure Tester
Proto Tools Logo

Proto Tool JFF730MA 4 Piece Cooling System Pressure Tester

  • Tests all systems from 4 PSI to 30 PSI caps and 3 to 30 lbs. pressure range
  • Easy to read 2.5" gauge
  • Large barrel with a quick pump
$172.72
View Item
Special for this item!
Proto Tool JFP100 Pneumatic Fan Clutch Wrench
Proto Tools Logo

Proto Tool JFP100 7 Piece Pneumatic Fan Clutch Wrench

  • Removes and installs fan clutch when repairing the water pump or fan clutch
  • Use with air hammer
  • Includes seven driving wrenches that fit Ford, GM, Chrysler, and Jeep. Sizes include: 7/8-inch, 32mm, 36mm, 40mm thin, 1-7/8-inch, 2-inch, and 47mm
$212.07
View Item
Special for this item!
Proto Tool JFP1200MS Fuel Injection Master Test Kit
Proto Tools Logo

Proto Tool JFP1200MS 51 Piece Fuel Injection Master Test Kit

  • For testing the fuel injection systems on most domestic and foreign cars with Schrader type ports
  • Includes Large 3-1/2-inch gauge with a range of 0-145 PSI/0-1000 KPA
  • Includes Medium 2-1/2-inch gauge with a range of 0-15 PSI/0-100 KPA
$431.91
View Item
Special for this item!
Proto Tool JFP18A Camshaft Bearing Tool
Proto Tools Logo

Proto Tool JFP18A Camshaft Bearing Tool

  • Removes or inserts camshaft bearings in most engines from compact cars to heavy trucks
  • No problems with slightly undersize or oversize bearings
  • Range of 1-1/8-inch to 2-19/32-inch (28.58mm - 68.3mm)
$157.45
View Item
Special for this item!
Proto Tool JFP521 Leak Tamer EVAP Approved Smoke Machine
Proto Tools Logo

Proto Tool JFP521 Leak Tamer EVAP Approved Smoke Machine

  • Patented UltraTraceUVTM the only OEM-approved dye
  • Auto shut-off
  • Auto-correct EVAP pressure
$1,724.60
View Item
Special for this item!
Proto Tool JFP9510 Smoke Diagnostic Machine
Proto Tools Logo

Proto Tool JFP9510 Smoke Diagnostic Machine

  • Full Featured Diagnostic Capabilities Allows The Inspection Of Any Pressurized System
  • Compact And Simple To Use
  • Evap Approved
$1,228.93
View Item
Special for this item!
Proto Tool JFP97315 Diesel Compression Tester
Proto Tools Logo

Proto Tool JFP97315 15 Piece Diesel Compression Tester

  • 2-1/2" dial, glycerine-filled gauge with glass lens in stainless steel housing
  • 4,500 PSI rated nylon jacketed pressure hose assembly
  • Dual scale - 0-1,000 PSI; Metric scale - 0-70 bar
$345.67
View Item
Special for this item!
Sunex 2800 Impact Socket
Sunex Pneumatic and Hand Tools Logo

Sunex 2800 1/2" Drive 30mm Deep Impact Socket

  • Common axle nut size
  • Forged from the finest Molybdenum alloy steel
  • Designed to extend the life of fasteners
$9.80
View Item

View discontinued Engine and Chassis Tools

Lisle 53500 Oil Filter Wrench
Lisle Auto Tools Logo

Lisle 53500 Large Oil Filter Wrench

  • No longer available...
Top Sellers in This Category

Shipping Time Image


Bill Me Later from Paypal


Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Blog ImageFacebook ImageTwitter Image


Tools-Plus.com Customer Comments
MADE IN USA Products