Shop by Brand 
Hitachi Tools Hitachi Cordless Tools Hitachi Lithium Ion Powered Tools
Shop by Brand Hitachi Tools Hitachi Pneumatic Air Powered Tools Hitachi Gas Powered Nail Guns
Hitachi NT65GA 2-1/2" Gas Powered 15-Gauge 34° Angled Finish Nailer
Time is money and a gas nailer can save you both! Without the bulky pneumatic attachments, you can easily move around the jobsite, saving you time in set-up, while working, and in cleanup after the job has been completed. The Hitachi NT65GA gas nailer can hold fasteners up to 2-1/2" in length and has a capacity of 100 nails. The double action nail feed and a reciprocating piston system easily drives an intermittent cycle rate of two nails per second and a 1,000 nail per hour continuous rate to rapidly complete your workload.
Expand all tabs
Collapse into tabsHighlights:
- Powered by a gas fuel rod and Lithium-Ion battery ensuring complete portability on the jobsite
- Offers you freedom from cumbersome air hose and compressors, while saving you time in setup, during applications, and in job site clean up
- Lightweight at only 4.4 lbs and designed for balance, maneuverability and minimal user fatigue this tool is ideal for overhead and extended use applications
- Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
- Incorporates a quick clear nose, with tool-less jam release, for easy maintenance and reduced downtime
- The double lock fuel compartment latches securely and keeps the fuel rod seated firmly with no fear of gas leaks
- Hitachi's 3.6V Lithium Ion batteries can drive up to 2,000 fasteners per charge
- The finish nailer fuel rods can power 1,200 shots each
This item is discounted for Tool-A-Rama! Buy before Sunday at midnight and save 5%!
Free Cordless Screwdriver Included!!
From now and while supplies last, purchase the NT65GA Finish Nailer or the NT65GB Finish Nailer and receive a FREE Hitachi DB3DL Cordless Screwdriver with your order!
The DB3DL Features:
- 1.5Ah Li-Ion batteries for three times the life at half the weight of NiCd and NiMH batteries
- Compact and lightweight - only 9.75" in length and weighs less than 1 lb.
- Dual position handle converts from straight to pistol grip for maximum fl exibility
- Spindle lock for manual screw tightening
- 1/4" hex chuck for quick and easy bit changes
- Built-in LED light to illuminate the work surface
Offer valid while supplies last. Cordless driver will be packed in with the nailer.
The NT65GA includes:
- 2-1/2" Gas Powered 15-Gauge Angled Finish Nailer
- (2) 3.6V Lithium-Ion 1.5Ah batteries (326263)
- 12V Home/Car Charger (UC3SML)
- No Mar Nose Cap (886349)
- Pair of Safety Glasses (875769)
- 4mm Hex Bar Wrench (944458)
- 3mm Hex Bar Wrench (943277)
- Carrying Case (886608)
- Fuel Rods Not Included
Features:
- Uses same 15-guage 34° Finish nail as traditional Bostitch, Senco etc.
- A built in low battery indicator light helps alert the user of battery status to prevent unexpected downtime
- The patented elastomer handle provides a very comfortable and secure grip
- The tool-less depth of drive can be adjusted for flush drives into various materials
- Comes with a 1-Hour AC/DC charger with adapters for charging in standard wall outlets or in the car
- The detachable no-mar nose cap protects work surfaces from scratches or indentations and can be stored on the side of the magazine when not in use
- The dry fire lockout prevents blank activation, which helps prolong tool life and protects work surfaces from damage
- The variable position hook can be set for either left or right-handed users
- The angled magazine holds 100 15-gauge fasteners Of 1-1/4" to 2-1/2" lengths
Tech Specs:
- Fasteners: 15-gauge, 34° angle
- Nail Length: 1-1/4 - 2-1/2 Inches
- Magazine Capacity: 100 (2 strip)
- Magazine Type: Rear Loading
- Battery Type: Lithium-Ion
- Voltage: 3.6V
- Amp Hours: 1.5Ah
- Battery Life: 2,000 drives
- Charge Time: 1 hour
- Fuel Cell Part Number: 728981
- Fuel Cell Life: 1,200 drives
- Feeder: Double-actioned
- Firing Mode: Single action
- Hook: Variable position
- Jam Release: Tool-less
- Depth of Drive: Tool-less
- Dry Fire Lockout: Yes
- No Mar Nose Cap: Yes
- Charger w/ Wall & Car Adapters: Yes
- Length: 11-13/16 Inches
- Width: 3-11/32 Inches
- Height: 12-15/16 Inches
- Weight: 4.4 Pounds
Josh from Hitachi gives Tools-Plus.com a Hands-On Demo of the New Hitachi Gas Finish Nailers!
10 Year Professional HXP Warranty
  Hitachi 10 Year HXP Cordless Power Tool WarrantyEvery Hitachi cordless power tool is designed to the highest standards and rigorously tested for both performance and durability. Hitachi is proud to offer an exclusive 10-year Lithium Ion tool warranty* to the original purchaser on HXP Lithium Ion cordless tools, which protects against possible defects in materials and workmanship from the original purchase date.**
 Hitachi 2-Year HXP Lithium Ion Battery WarrantyAll HXP Lithium Ion batteries contain unique circuit protection technology that ensures proper maintenance so they will continue to operate at peak levels at all times. Hitachi is proud to offer an exceptional 2-year HXP Lithium Ion battery warranty to the original purchaser, which protects against possible defects in materials and workmanship from the original purchase date. HXP Lithium Ion batteries have up to three times the lifespan of traditional NiCd or NiMH batteries. Where NiCd/NiMH batteries could be used for up to 500 charge cycles, HXP Lithium Ion batteries can be used for up to 1500 charge cycles!  Hitachi 1-Year HXP Lithium Ion Charger WarrantyHitachi HXP Lithium Ion cross-compatible chargers feature built-in Cool Air Flow systems to maintain the optimal charging temperature. Hitachi offers a 1-year HXP Lithium Ion charger warranty to the original purchaser, which protects against possible defects in materials and workmanship from the original purchase date.
 Patented Built-In Protection SystemThe Hitachi protection circuitry monitors each cell contained within the battery pack. This ensures each cell is only charged to its optimal level. Once a cell reaches optimal charge level, the charging function to that cell is stopped to prevent overcharging.
**Warranty data was collected February 19, 2009. |
Questions about the Hitachi NT65GA 2-1/2" Gas Powered 15-Gauge 34° Angled Finish Nailer? E-mail us.
For the past 30 years, Tools-Plus has committed itself to carrying the best hand tools, power tools, woodworking machinery, and accessories like the Hitachi NT65GA 2-1/2" Gas Powered 15-Gauge 34° Angled Finish Nailer above.
