Highlights:

• Powered by a gas fuel rod and Lithium-Ion battery ensuring complete portability on the jobsite
• Offers you freedom from cumbersome air hose and compressors, while saving you time in setup, during applications, and in job site clean up
• Lightweight at only 4 lbs and designed for balance, maneuverability and minimal user fatigue this tool is ideal for overhead and extended use applications
• Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
• Incorporates a quick clear nose, with tool-less jam release, for easy maintenance and reduced downtime
• The double lock fuel compartment latches securely and keeps the fuel rod seated firmly with no fear of gas leaks
• Hitachi's 3.6V Lithium Ion batteries can drive up to 2,000 fasteners per charge
• The finish nailer fuel rods can power 1,200 shots each

Free Cordless Screwdriver Included!!

From now and while supplies last, purchase the NT65GA Finish Nailer, the NT65GB Finish Nailer or the NT65GS Finish Nailer and receive a FREE Hitachi DB3DL Cordless Screwdriver with your order!

The DB3DL features a 3.6V Lithium Ion battery. that boasts 3 X the running time of traditional NiCd. batteries, yet weighs 50% less. This lightweight. workhorse converts easily from straight to pistol grip,. making it the perfect tool for tough to reach spaces. Its 1/4" hex chuck makes bit changes quick and. easy and features a spindle lock for manual screw. tightening. Switch into drilling mode to drill small. pilot holes, or choose from 21 clutch settings to drive. screws fl ush into wood or drywall. The DB3DL also. featurs a built-in LED light to illuminate dimly lit work. areas and an easy to use forward / reverse switch to. change bit direction with a push of a button.

The DB3DL Features:

• 1.5Ah Li-Ion batteries for three times the life at half the weight of NiCd and NiMH batteries
• Compact and lightweight - only 9.75" in length and weighs less than 1 lb.
• Dual position handle converts from straight to pistol grip for maximum fl exibility
• Spindle lock for manual screw tightening
• 1/4" hex chuck for quick and easy bit changes
• Built-in LED light to illuminate the work surface

Offer valid while supplies last. Cordless driver will be packed in with the nailer.

The NT65GB includes:

• 2-1/2" Gas Powered 16-Gauge Angled Finish Nailer
• (2) 3.6V Lithium-Ion 1.5Ah batteries (326263)
• AC/DC Charger (UC3SML)
• No Mar Nose Cap (886349)
• Pair of Safety Glasses (875769)
• 4mm Hex Bar Wrench (944458)
• 3mm Hex Bar Wrench (943277)
• Carrying Case (886608)
• Fuel Rods Not Included

Features:

• Uses same 16-guage 20° Finish nail as traditional Paslode etc.
• A built in low battery indicator light helps alert the user of battery status to prevent unexpected downtime
• The patented elastomer handle provides a very comfortable and secure grip
• The tool-less depth of drive can be adjusted for flush drives into various materials
• Comes with a 1-Hour AC/DC charger with adapters for charging in standard wall outlets or in the car
• The detachable no-mar nose cap protects work surfaces from scratches or indentations and can be stored on the side of the magazine when not in use
• The dry fire lockout prevents blank activation, which helps prolong tool life and protects work surfaces from damage
• The variable position hook can be set for either left or right handed users
• The angled magazine holds 100 16-gauge fasteners of 1-1/4" to 2-1/2" lengths

Tech Specs:

• Fasteners: 16-gauge, 20° angle
• Nail Length: 1-1/4 - 2-1/2 Inches
• Magazine Capacity: 100 (2 strip)
• Magazine Type: Rear Loading
• Battery Type: Lithium-Ion
• Voltage: 3.6V
• Amp Hours: 1.5Ah
• Battery Life: 2,000 drives
• Charge Time: 1 hour
• Fuel Cell Part Number: 728981
• Fuel Cell Life: 1,200 drives
• Feeder: Double-actioned
• Firing Mode: Single action
• Hook: Variable position
• Jam Release: Tool-less
• Depth of Drive: Tool-less
• Dry Fire Lockout: Yes
• No Mar Nose Cap: Yes
• Charger w/ Wall & Car Adapters: Yes
• Length: 10-1/4 Inches
• Width: 3-11/32 Inches
• Height: 10-15/16 Inches

Josh from Hitachi gives Tools-Plus.com a Hands-On Demo of the New Hitachi Gas Finish Nailers!