Hitachi Framing Nailers
section within our Hitachi Tools departmentToday Hitachi has the majority share of the framing nailer market, and that is not without reason: they feature some of the best quality and durability around. Before nailers tasks like toenailing had to be done with a traditional hammer. The problem with this is that with every swing of the hammer the stud would move from its proper place. Now with a Hitachi framing nail gun you can drive the nail in with one blow and the stud will remain in the exact position it needs to be. You can save time and money by doing the job right the first time with this tool.
Hitachi NR83A2 2" to 3-1/4" 20° - 22° Full Round Head Framing Nailer
- Selective actuation (ANSI compliant) Tool-free depth adjustment, open-nose design
- Full round-head, plastic strip collation
- 2" to 3-1/4" x .113 to .131
Hitachi NR90AEPR 2" - 3-1/2" 21 Deg. Full Round Head Framing Nailer
- 2" - 3-1/2" nail length capacity
- Tools-less Dial of Depth
- Weighs only 7.5 lbs
Hitachi NR90AF 2" to 3-1/2" 28 Deg. Wire Weld Framing Nailer
- The high capacity magazine loads from the rear and is made from extruded aluminum for added durability
- Tool-free depth adjustment for ease of use and efficiency when fastening different types of wood
- Change sequential to contact nailing with the flip of a switch, no additional tools needed
Hitachi NV75AG 1-3/4" to 3" 15 Deg. Coil Framing Nailer
- Drives both wire framing and plastic sheet siding collated coil fasteners
- Tool-less depth adjustment
- Plastic shield to deflect wire collation
Hitachi NV83A3 6D (2") to 12D (3-1/4") 16 Deg. Full Head Construction Coil Nailer
- Delivers quick and consistent placement of 3-1/4" x .131" nails
- Rapid response and powerful driving force make this nailer one bad mutha
- Essential for a wide range of framing, remodeling, and construction applications
View discontinued Hitachi Framing Nailers
Hitachi NR83A 2" To 3-1/4" Full Round Head Framing Nailer
- No longer available...
- Consider the NR83A2
Hitachi NR90AD 2" To 3-1/2" Pneumatic Air Framing Nailer
- No longer available...
- Consider the Dewalt D51822R
Hitachi NR90AE 2" - 3-1/2" 21 Deg. Full Round Head Framing Nailer
- No longer available...
- Consider the NR90AEPR
Hitachi NV83A2 6D (2") To 12D (3-1/4") Full Head Construction Coil Nailer
- No longer available...
- Consider the NV83A3










