HTC HTC3000 Universal Mobile Base

Item Number:H-PHTC3000
Availability:In Stock
Usually ships within 1 day
Our Price:
2+ / $72.50
Shipping & Handling:
Free Shipping![more]

HTC HTC3000 Universal Mobile Base

Expand all tabs

Collapse into tabs


  • Adjusts from 14" x 14" to 38" x 38" square and up to 22" x 54" rectangular
  • Foot activated wheel and floor locks
  • 700lb capacity
  • Slotted side rails for exact machine fit and raise machine height by 1"
  • 3" heavy duty wheels
  • All parts included

The HTC3000 includes:

  • HTC Model HTC3000 Mobile Base

UPC - 878258003728

Overall Rating for HTC HTC3000 Universal Mobile Base
(based on 9 reviews)
Excellent Rolling Base
By Jim from GA on April 1, 2015
Base is great. Instructions are Fair. Instructions say allow 1 inch clearance for size of base, and that's important to allow room to attach everything. I got a little confused on the metal brake that curves over the straight wheel that fits into the slots with a little bending. When I got it right the brake stuck down in place and sprung back up when depressed again.
Sturdy and easy to assemble
The nut was a different size than the connecting bolt requiring 2 different sized wrenches or sockets. Nothing difficult to overcome. Instructions could use a clear picture of the brake piece and its placement.

I would recommend this item to a friend.

Holding up to my Delta Unisaw
By Ralph from Emmaus, PA on December 21, 2014
This base worked out perfectly for my Delta saw. The table saw was my grandfather's and unlike most table saw today it is all made of cast iron. My grandfather had made a dolly for it which raised the table four inches higher than normal. It would sometimes move when cutting large material. I was able to assemble the new mobile base while it was still on the dolly and then remove the dolly once the base was completed.
Easy to assemble.
Not much to dislike about it, only the test of time will determine its longevity.

I would recommend this item to a friend.

HTC 3000
By Dan C from TX on March 3, 2014
This is third mobile base I have brought from different manufactures. This is the only one I have bought that has everything in the box.
All supplies in one box
Ease of assembly
Four corners that lock
The swivel casters scrape their bracing.
700 lb rating may be off some

I would recommend this item to a friend.

HTC 3000 Mobile Base
By Roger from Texas on September 22, 2012
Works great, I have it on my table saw.
Strong and well made.
Instructions are not clear.

I would recommend this item to a friend.

HTC HTC3000 Universal Mobile Base
By Mike from on September 16, 2012
Tools-Plus had the best price for this heavy duty mobile base. Easy to put together and very solid
all 4 wheels lock

I would recommend this item to a friend.

By Karl from Atlanta on September 1, 2012
The mobile base was delivered well packaged and promptly. The base was easy to assemble and the directions were clear. The casters are large enough for my +/- 250# band saw to move around easily. The caster locks on the rear work well. The lowering device on the front rollers function well in setting the frame on the rubber feet.
Pay attention to the position of the front roller bolt holes as you assemble. You can also preassemble and then remove the middle side bolts. This allows you to slip the frame halves under the tool seperately. Then bolt the frame together. It makes it easy for one person to place the tool on the mobile frame.

I would recommend this item to a friend.

Table saw Mobility
By Don from Corvallis, Oregon on June 17, 2012
The construction was easy and straight forward. I've had a set of wheels that I installed when I purchased the saw, always hard to use. The HTC3000 simplified this issue. a great value for what you get.
Very easy to setup, put together and use.
Nothing, met all of my expectations.

I would recommend this item to a friend.

By Robert Sherwood from Morton Grove Illinois on February 18, 2012
Was very easy to put together.
The price and fits the table saw for half the price of of other mobile bases.

I would recommend this item to a friend.

HTC3000 Universal Mobile Base
By Gary Barnett from on February 12, 2012
The base arrived in one box within the time stated. The mobile base went together easily using my kitchen table as a work area. The instructions were clear and assembly went as i had hoped. To ensure a proper fit for my Craftsman table saw with a granite top I slipped a piece of 3/4 inch MDF under the saw, traced the frame and then cut it to size. I used the MDF as a guide to size the base. I completed assembly of the base, called two friends to lift the saw, slid the base under the saw and was very pleased with my purchase. The first time I moved the saw was to load it on a 5x8 trailer. The soft wheels worked great and I was able to role the saw onto the trailer, lock the wheels and off I went. Unloading and positioning the saw in my workshop went smoothly also. The base worked just as advertised.
Ease of assembly, very smooth rollers holding a heavy table saw.
Nothing yet.

I would recommend this item to a friend.

General Woodworking Machinery 50-025 Universal Mobile Base
General International Logo

General Woodworking Machinery 50-025 Universal Mobile Base

  • Heavy duty steel construction with telescoping design
  • Minimum square size 11" x 11"
  • Maximum square size 35-1/4" x 35-1/4"
Out of Stock
HTC HTC2000 Universal Mobile Base Kit
HTC Products Logo

HTC HTC2000 Universal Mobile Base Kit

  • Adjusts from 12" x 12" to 36" x 36" square
  • Adjust up to 20" x 52" rectangular
  • 500 lb capacity
In Stock
Check out the rest of our...
Our Customers Are Saying...

Bill Me Later from Paypal

Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order

Blog ImageFacebook ImageTwitter Image Customer Comments
MADE IN USA Products