Ingersoll Rand 2475N7.5-V 231 80 Gallon Vertical Air Compressor
Ingersoll Rand 2475N7.5-V 231 7.5HP 80 Gallon Vertical Air Compressor
- Industrial-class 2 stage compressor with stronger motor
- 100% cast iron construction lasts a lifetime
- Splash lubrication: simple and reliable
- 230 Volts, 7.5 Horsepower, 175 PSIG, runs on standard single phase power
- Nema 1 & Open Drip Proof Motor
- This unit (1 phase) doesn't need a motor starter
- Auto Start-Stop pressure switch
Simply put, Ingersoll Rand's 2475N7.5-V is the best 80 gallon vertical air compressor out there. Its stronger motor is capable of 24 cfm at max pressure (175 psig). Its cast iron frame is durable and can take the heat, literally. The 2475N7.5-V won't overheat thanks to its radial fins and integral fan blade/finned copper intercooler. 100 years of creating, innovating, and perfecting, all in one machine.
The 2475N7.5-V 231 includes:
- One (1) Ingersoll Rand 7.5HP 80-Gallon Vertical Air Compressor
- Tank (gal): 80 Vertical
- Max Pressure (psig.): 175
- Flow at Max Pressure (cfm): 24
- Voltage: 230
- Engine: 1 phase
- Nominal Power (hp): 7.5
- Base Length (in.): 48"
- Base Width (in.): 40"
- Base Height (in.):76"
- Weight (lbs): 611
- NPT Outlet (in.): 3/4"
Things to consider.
- Is the tank full of air so it doesn't think its supposed to kick on?
- Is there a "reset" button on the motor that is tripped?
- Is the Regulator adjustment being done correctly?
- Is it plugged in to a proven working power source?
- Is there is "not" enough restriction to the air flow that the gauge won't move up?
- With the Regulator turned all the way off, does the compressor build up pressure then shut off?
- When you open the tank drain slightly does the compressor kick on at about 90~100psi using the Tanks gauge to measure?