JET 649003K Benchtop Drum Sander
JET 649003K 22-44 Plus 1-3/4 HP, 1 PH, 115 V Benchtop Drum Sander
For Pre-Sales questions on Jet Tools and Machinery, feel free to contact Customer Service (888-804-7129) or for technical issues (800-274-6846). For all warranty issues, please call 800-274-6848.....and don't forget to tell them Lucy sent you!
- Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
- Patented conveyor belt Trackers dramatically reduce the need for manual belt adjustments
- 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance
- Sealed and permanently lubricated drum ball bearings for longer life
- Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
- Adjustable drum height and downward pressure feature virtually eliminates snipe
- Large cast-iron handwheel adjusts height at 3/32" per turn for precise sanding thickness control
- Patented abrasive take-up fasteners make changing abrasives quick and easy
The 649003K includes:
- Jet 22-44 Plus Benchtop Drum Sander
- Infeed/outfeed tables are not included
- Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute
- On/off switch with overload protection is front-mounted for operator's convenience
- One feed and one drive motor for superior sanding control
- Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
- Our exclusive SandSmartTM infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
- Part Number: 649003K
- Maximum Board Width: 44" (2 passes)
- Maximum Board Thickness: 4"
- Minimum Board Length: 2-1/4"
- Minimum Board Thickness: 1/32"
- Drum Diameter: 5"
- Drum Length: 22"
- Drum Speed: 1700 RPM
- Conveyor Speed: 0-10 SFPM
- Conveyor Motor: 43 in-lbs torque direct drive, dc
- Dust Port Diameter: 4 OD/in
- Motor: 1-3/4 HP, Single Phase, 115 Volts Prewired, 20 Amps
- Drum bearing diameter: 1"
- Dimensions: 32"x14"x14"
- Weight: 254 pounds
This item is covered by WMH's 5 Year Warranty and Jet's Red Assurance Protection Plan.
WMH Stands behind every product it sells with outstanding customer service and support. Their multitude of service repair centers offer quick turnarounds and most of the time they can authorize warranty repair, assist you in locating replacement parts, and perform routine maintenance and large repairs on your tools and machinery. To find a service center near you, please call 1-800-274-6848.