JET 649005K Drum Sander
JET 649005K 22-44 Plus 1-3/4 HP, 1PH, 115 V Drum Sander PLUS Closed Stand and Casters
For Pre-Sales questions on Jet Tools and Machinery, feel free to contact Customer Service at (888) 804-7129, or for technical issues call (800) 274-6846). For all warranty issues, please call (800) 274-6848.....and don't forget to tell them Lucy sent you!
- Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
- Patented conveyor belt Trackers dramatically reduce the need for manual belt adjustments
- Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat damage
- Sealed and permanently lubricated drum ball bearings for longer life
- Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results
- Adjustable drum height and downward pressure feature virtually eliminates snipe
- Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control
- Patented abrasive take-up fasteners make changing abrasives quick and easy
This sander is one of the largest in its class. You can sand up to 44" wide with better accuracy than any other sander in it's category.
The 649005K includes:
- Jet 22-44 Plus Sander
- Closed Stand
- Infeed/outfeed tables NOT included
- Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute
- On/off switch with overload protection is front-mounted for operator's convenience
- One feed and one drive motor for superior sanding control
- Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
- Part Number: 649005K
- Maximum Board Width: 44" (2 passes)
- Maximum Board Thickness: 4"
- Minimum Board Length: 2-1/4"
- Minimum Board Thickness: 1/32"
- Drum Diameter: 5"
- Drum Length: 22"
- Drum Speed: 1700 RPM
- Conveyor Speed: 0-10 SFPM
- Conveyor Motor: 43 in-lbs torque direct drive, dc
- Dust Port Diameter: 4 OD/in
- Motor: 1-3/4 HP, Single Phase, 115 Volts Prewired, 20 Amps
- Drum bearing diameter: 1"
- Dimensions: 18"x23"x32
- Weight: 345 pounds
This item is covered by WMH's 5 Year Warranty and Jet's Red Assurance Protection Plan.
WMH Stands behind every product it sells with outstanding customer service and support. Their multitude of service repair centers offer quick turnarounds and most of the time they can authorize warranty repair, assist you in locating replacement parts, and perform routine maintenance and large repairs on your tools and machinery. To find a service center near you, please call 1-800-274-6848.