JET 708309 Shaper
JET 708309 Model JWS-25X Shaper
For Pre-Sales questions on Jet Tools and Machinery, feel free to contact Customer Service (888-804-7129) or for technical issues (800-274-6846). For all warranty issues, please call 800-274-6848.....and don't forget to tell them Lucy sent you!
Excludes Stock Numbers: 719100, 719110, 726100, and 719200. Other exclusions may apply.
- Two-speeds let you select the best speed and torque for different cutter diameters
- Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
- Large 25" X 25-1/2" precision ground cast iron table provides a durable work area
- Poly-V-belt transfers maximum power to the spindle
- Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
- Reversible spindle speeds for diverse shaping jobs
- Powerful 3HP, 1Ph motor with magnetic controls
- Starting pins for irregular shaping
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25"x 25-1/2" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4" dust port.
The 708309 includes:
- Jet JWS-25X Shaper
- Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
- 4" Dust port built into fence for convenient hookup to any dust collection system
- Spindle lock for safe and easy cutter set up
- Spindle height scale
- Part Number: 708309
- Spindle Speed: 7500 and 10000 RPM
- Reversable: Yes
- Spindle Diameter: 1/2" and 3/4" Standard
- Spindle Size Under Nut: 1/2" (2-13/64") and 3/4" (3-3/16")
- Spindle Travel: 3"
- Table Size: 25"x25-1/2"
- Table T-Slot: 3/4"x3/8"
- Table Opening Diameter: 6-9/32"
- Table Insert Opening Diameter: 2-9/16" and 4-21/64"
- Fence Size: 14-1/2"x4-3/4"
- Router Bit Collet Diameter: 1/4" and 1/2" optional
- Table Height From Floor: 33"
- Electrical Controls - Magnetic Starter: Yes
- Digital Readouts: No
- Tilting Spindle: No
- Maximum Diameter Cutter Below Table: 6"
- Maximum Diameter Cutter Above Table: 7"
- Table Inserts: 2
- Fence Travel (Major and Minor): 4-1/4" and 15/16"
- Dust Port Diameter: 4 OD/in
- Dust Collection Minimum CFM Required: 350
- Motor: 3 HP, Single Phase, 230 Volt Only, 16 Amps
- Model Number: JWS-25X
- Dimensions: 23"x25"x43"
- Weight: 331 pounds
This item is covered by WMH's 5 Year Warranty and Jet's Red Assurance Protection Plan.
WMH Stands behind every product it sells with outstanding customer service and support. Their multitude of service repair centers offer quick turnarounds and most of the time they can authorize warranty repair, assist you in locating replacement parts, and perform routine maintenance and large repairs on your tools and machinery. To find a service center near you, please call 1-800-274-6848.