JET 708492K Proshop Table Saw
JET 708492K JPS-10TS 10" Proshop Table Saw PLUS 30" Fence, Steel Wings w/Riving Knife
For Pre-Sales questions on Jet Tools and Machinery, feel free to contact Customer Service (888-804-7129) or for technical issues (800-274-6846). For all warranty issues, please call 800-274-6848.....and don't forget to tell them Lucy sent you!
Excludes Stock Numbers: 719100, 719110, 726100, and 719200. Other exclusions may apply.
- 1-3/4HP, 1Ph, 115/230V (Prewired 115 Volts)
- T-Style miter slot for increased cross cut capability
- Large 4" dust port which allows increased dust collection
- 30" Proshop fence system
- Quick, Safe and easy blade changes with the integrated arbor lock
- Looking for a Chip-resistant finish, Powder coated paint is the way to go
- Table saw includes a 10" blade
- Left Tilting cast iron trunnion
Jet has been making great metalworking and woodworking machines since 1937. Get the power of a high-end cabinet saw stuffed into a compact design of a contractor-style machine with the JPS-10TS from Jet. This 10" ProShop 30" Steel Wing Table Saw can be assembled easily thanks to its exclusive leg stand design and enclosed cabinet. The blade guard and riving knife have quick-release features, reducing chances of kickback as well as allowing tool-less mounting and removal. A 10" blade is included to get you started. Give your dust collection unit a hand; the sloped cabinet floor and 4" extraction port make dust collection even more efficient and effective so your work area will remain clean. The heavy duty cast iron table features a T-style miter gauge slot. The 708492K's control switch is easy to reach and use. No workshop is complete without this great machine from Jet.
The 708492K includes:
- One (1) JPS-10 10" Proshop Table Saw
- One (1) 10" Blade
- Riving Knife
- Brand: Jet
- Overall Dimensions: 60"L x 40"W x 41"H
- Height: 39 inch
- Width: 35 inch
- Length: 82 inch
- Weight: 237.8 pound
- Gross Weight: 261.5 pound
- Blade Diameter: 10"
- Arbor Diameter: 5/8"
- Arbor Speed: 4000 RPM
- Maximum Depth of Cut: 3 1/8"
- Maximum Depth of Cut at 45 Degrees: 2 1/8"
- Maximum Rip Right of Blade: 30"
- Maximum Rip Left of Blade: 12 "
- Table in Front of Saw Blade at Maximum Depth of Cut: 10"
- Maximum Width of Dado: 13/16"
- Maximum Diameter of Dado: 8"
- Table Type: Steel
- Table Height: 343/4 "
- Table Size with Standard Extension (L x W): 27 x 44"
- Table Size without Wings (L x W): 20 x 27"
- Dust Port Outside Diameter: 4"
- Dust Collection Minimum CFM Required: 350 cu.ft/min
- Dust Collection Adapter Port: Yes
- Miter Gauge Type: T-slot with stops
- Motor Power: 13/4 HP
- Motor Voltage: 115 / 230 V
- Prewired Voltage: 115 V
- Motor Current: 15 / 7 A
- Motor Phase: 1 Ph