JET 708493K Proshop Tablesaw
JET 708493K JPS-10TS 10" Proshop Tablesaw PLUS 52" Fence, Steel Wings w/Riving Knife
For Pre-Sales questions on Jet Tools and Machinery, feel free to contact Customer Service (888-804-7129) or for technical issues (800-274-6846). For all warranty issues, please call 800-274-6848.....and don't forget to tell them Lucy sent you!
- 1-3/4HP, 1Ph, 115/230V (Prewired 115 Volts)
- Easy blade changes due to their integrated arbor lock
- Can't beat a 52" fence system with a T-square design
- Large 4" dust port
- Chip-resistant finish with the revolutionary powder coated paint
- Looking for added work surface - includes a 27" x 36" wood table board
Get the great features of a high-end cabinet saw while only requiring the space of a contractor-style machine when you purchase JET's ProShop Table Saw. This item includes sturdy steel wings, a riving knife, and a 10" blade to get you started. The integrated arbor lock makes blade changes a snap, and a 52" fence system with a T-square design is hard to beat. Your dust collection system will be even more effective with the saw's 4" extraction port and sloped cabinet floor. The transparent blade guard provides additional protection without exposing blade. The blade guard and riving knife have quick release features for less kickbacks and tool-less mounting and removal. Nobody makes efficient wood and metalworking machinery like Jet.
The 708493K includes:
- One (1) Jet 708481K Proshop Tablesaw
- One (1) 10" Blade
- Brand: Jet
- Dimensions: 82"L x 40"w x 41"H
- Height: 39 inch
- Width: 35 inch
- Length: 82 inch
- Weight: 287.95 pound
- Gross Weight: 312.35 pound
- Blade Diameter:10"
- Arbor Diameter: 5/8"
- Arbor Speed: 4000 RPM
- Maximum Depth of Cut: 3 1/8 "
- Maximum Depth of Cut at 45 Degrees: 2 1/8 "
- Maximum Rip Right of Blade: 52 "
- Maximum Rip Left of Blade: 12 "
- Table in Front of Saw Blade at Maximum Depth of Cut: 10"
- Maximum Width of Dado: 13/16 "
- Maximum Diameter of Dado: 8"
- Table Type: Steel
- Table Height: 343/4"
- Table Size with Standard Extension (L x W): 27 x 44"
- Table Size without Wings (L x W): 20 x 27"
- Dust Port Outside Diameter: 4"
- Dust Collection Minimum CFM Required: 350 cu.ft/min
- Dust Collection Adapter Port: Yes
- Miter Gauge Type: T-slot with stops
- Motor Power: 13/4 HP
- Motor Voltage: 115 / 230 V
- Prewired Voltage: 115 V
- Motor Current: 15 / 7 A
- Motor Phase: 1 Ph