Metal Fabrication Equipment and Accessories

Jet 321291 TAK-ZX, Taper Attachment Kit for All ZX Lathe Models

• Taper attachment kits
• Specially designed for each model
• 10° inclusive cutting capacity

Jet 321292 CC-ZX Collet Closer for All ZX Lathe Models

• Collet closer
• Specially designed for each model
• Precision ground components

Jet 321514A CC-GHB1340A 5-C Collet Closer

• Specially designed for each model
• Precision ground components
• Uses 5C collets

Jet 321519 CC-GHW Collet Closer for All W Lathe Models

• Collet closer
• Specially designed for each model
• Precision ground components

Jet 321520 TAK-GHW Taper Attachment for All W Lathe Models

• Taper attachment kits
• Specially designed for each model
• 10° inclusive cutting capacity

Jet 466001 CCS-1 R-8 1/8'' - 1'' Capacity

• Jet milling accessories
• Milling chuck and collet sets
• 17-piece set in a wooden case

Jet 650210 20 Piece Tin-Coated Double End Mill Set

• 20 PC SET, CENTER CUTTING, 3/16 x 3/4 BY 16THS
• 2 & 4 fit double end set
• Wooden case

Jet 650270 Aloris Super-Precision Intro-Pro Sets BXA

Jet 650275 Aloris Super-Precision Intro-Pro Sets CXA

Jet 650280 Aloris Super-Precision Intro-Pro Sets CA for 18'' ZX Lathes

Jet 650285 Aloris Super-Precision Intro-Pro Sets CA for 22'' ZX Lathes

Jet 650290 Aloris Super-Precision Intro-Pro Sets DA for 26'' ZH Lathes

Jet 650295 200 Series Quick Change Wedge Type Tool Post Set

• Set contains one piston type tool post and one each of 5 tool holders
• 200(BXA) Series Tool Post
• #1 Boring & Facing

Jet 650300 300 Series Quick Change Wedge Type Tool Post Set

• Each set consists of one piston type tool post and one of each of 5 tool holders
• #1 Boring & Facing
• #2 Boring, Turning & Facing

Jet 650305 400 Series Quick Change Wedge Type Tool Post Set

• Set consistst of one piston type tool post holder and one of each of 5 tool holders
• 400(CA) Series Tool Post Holder
• #1 Boring & Facing

Jet 660100KT Milling Accessory Kit

• Collet Set (650132) contains 6 of the most commonly used sizes (1/8"- 3/4" by 8ths)
• 52 piece clamping kit (660012) includes 6 T-slot nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, and 4 studs at each length (3", 4", 5", 6", 7", 8"). The stud size is 1/2" - 13 T.P.
• 24-Piece R8 Milling Tool Kit (660220)

Jet 660200 22 Piece Turning Tool Kit for 13'' and 14'' Lathes

• Complete 22 piece set
• Compatible with 13" & 14" W Series Lathes
• Compatible with 13" & 14" Bench Series Lathes

Jet 660210 23 Piece Turning Tool Kit for ZX Series Lathes

• Set consists of the following:
• 1/2" x9" Double end boring bar
• 5/8"x10" Double end boring bar

Jet 660215 12 Pc Mini Turning Tool Kit for BDB-920 Lathes

• Kit consists of:
• Quick Change Tool Post and 4 holders
• MT-2 Live Center

Jet 660220 24-piece Milling Tool Kit for R8-Spindle Milling Machines

• 24pc Set consists of:
• 5pc Wiggler Set
• 5pc 1/2" HSS Boring Bars

Jet 752002 HB-1697H Hand Brake

• Simplicity of design, improved truss rod construction and a minimum number of moving parts make the JET hand brake easy to operate
• All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
• Both the bed and apron are bored in line to assure the utmost in accuracy

Jet 752102 BP-1696H Box & Pan Brake

• Includes 22 assorted fingers to adapt to many different bending applications
• All body sections are welded steel plate with heavy truss rods and braces, making this a strong and sturdy machine
• Both the bed and apron are bored in so results will always be accurate

Jet 752116 Model BP-1648H Bench Box & Pan Brake

• Bench model box and pan brakes
• Incorporates all the features of our standard hand brakes but with greater range of applications
• With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake

Jet 752122 BP-2248H Bench Box and Pan Brake

• Capable of carrying out a greater range of applications than the standard model
• Install fingers into this machine to convert it into a straight bending brake
• Box bending and special forming operations can be done as well when fingers are removed

Jet 752125 40'' X 12GA Box & Pan Brake Foot Clamp

• A wide range of finger widths are included for many different bending applications
• Black Ceramic Coated Fingers prevent rust and decay, delivering long and reliable life
• Welded steel plate frame (with heavy truss rods and braces) make this machine strong and sturdy

Jet 752127 50'' X 14GA Box & Pan Brake Foot Clamp

• Includes 11 different fingers, great for a wide range of bending applications
• Fingers feature Fingers feature Black Ceramic Coating, resisting rust and ensuring long and reliable life
• All body sections are strengthened and protected by welded steel plate and heavy truss rods and braces

Jet 752636 36" FS-1636H 16 Gauge Foot Shear

• Foot shear is great for precise shearing of mild steel (up to 16 gauge) and aluminum, brass, copper, lead, plastic and zinc
• Get twice the cutting life out of your blades with the two-way blade configuration
• Upper blade is two-way, bottom blade is one-way

Jet 752652 Model FS-1652H Foot Shear

• Ideal for precision shearing of mild steel up to 16 gauge
• Two-way blade configuration provides twice the cutting life
• Upper blade is two-way; bottom blade is one-way

Jet 754017 S-16N Stand For HN-16N Hand Notcher

• Stand for Jet HN-16N Hand Notcher
• Provides a sturdy foundation so you can work with confidence.

Jet 754024 Model S-24N Stand for the SR-2024N

• For use with SR-2024N slip roll
• Suitable for many industrial, educational and vocational shop uses

Jet 754030 S-30N Stand For 30'' SBR-30N

• Stand for 30" SBR-30N Shear/Brake/Roll
• All-metal construction makes it a sturdy foundation for safer and better operation

Jet 754036 Model S-36N Stand for the Jet SR-2236N Slip Roller

• Designed for use with SR-2236N slip roll
• Suitable for many industrial, educational and vocational shop uses

Jet 754040 S-40N Stand For 40'' SBR-40N

• Stand for the S-40N from Jet Shear/Brake/Roll
• Also fits other metalforming machines, rotary machines, and arbor presses
• Tough metal construction makes this a sturdy base

Jet 754051 Model S-50N Stand for the SR-1850N Slip Roll

• For use with model SR-1650N Slip Roller
• Floor stand also fits other metal forming machines, rotary machines and arbor presses

Jet 754100 BP-1248N Box and Pan Brake Floor Model

• Floor model box and pan brakes
• 10 assorted width fingers included for a wide range of bending applications
• Extra strength and protection is provided with the welded steel plates, heavy truss rods, and braces

Jet 754200 Model S-48N Stand for 48" Hand or BP Brake

• All metal construction for durability
• Long solid nose bar is suitable for many types of metalforming operations
• All body sections are welded steel plates with heavy truss rods designed to give greater unit strength

Jet 755108K SS-8T Slitting Shear W/Handle

• Portable shears
• Sheet steel, steel bars, rods, and many non-metallic materials are no match for this powerful shear
• Hardened and tempered stainless steel blades are replaceable

Jet 755112K SS-12T Slitting Shear W/Handle

• Portable shears
• Sheet steel, steel bars, rods, and many non-metallic materials are no match for this powerful shear
• Hardened and tempered stainless steel blades are replaceable

Jet 756016 HN-16T Bench Hand Notcher

• Hand notcher
• Heavy-duty cutting blade makes this machine capable of notching virtually any shearable material
• Made of cast iron for increased durability and strength

Jet 756020 24" X 20" SR-2024M Slip Roll With Lock

• Precision turned carbon steel rolls are ground and polished to deliver great results
• Large roll adjusting screws make upper roll easy to lift and material easy to remove
• Great for general fabrication and sheet forming applications at schools, HVAC shops, industrial, or vocational shops

Jet 756022 Bench Rotary Machine

• Rotary machine
• Long throat allows it to adapt to many different applications
• Burrs, edges, elbows, flanges, flattens, and turns smoothly and precisely in forward and reverse

Jet 756026 Model SR-2236N Slip Roller

• A great machine for industrial, educational, and vocational shop uses
• Precision turned carbon steel rolls are ground and polished to ensure excellent results
• Large roll adjusting screws facilitate lifting upper roll for easy material removal

Jet 756027 50'' Single Phase Electrical Power Slip Roll

• A great machine for sheet metal forming in both HVAC and FAB shops
• Foot pedal allows for immediate forward and reverse roll drive control
• Strong and sturdy machine has a heavy duty cast iron frame and enclosed base

Jet 756028 50'' Electrical Power Slip Roll (3PH)

• An essential machine for sheet metal forming in HVAC and FAB shops
• Switch between forward and reverse action on a dime with the foot petal roll drive
• High quality rolls are made of hardened polished high-carbon steel

Jet 756031 30'' 3 In 1 Shear Brake and Roll

• Get a shear, box & pan brake, and slip roll in just one machine
• Can be operated right or left handed
• Shear makes short work of mild steel, aluminum, brass, copper, lead, plastic, and zinc

Jet 756041 Model SBR-40N Shear/Brake/Roll

• One machine carries out three functions, shearing, braking, and rolling
• Can be used either right or left handed
• Shears are great for cutting mild steel, aluminum, brass, copper, lead, plastic, and zinc

Jet 756050 SR-1650M 50 X 16 Slip Roll

• A great machine for general fabrication and sheet forming at industrial, educational, and vocational shops
• Features precision turned carbon steel rolls that are ground and polished for exceptional performance
• Lift upper roll and remove material easily with the help of the large roll adjusting screws

Jet 756121 24'' PH-24 Planishing Hammer

• Smoothes beads and forms mild steel sheet metal (up to 16 gauge), aluminum, and copper (up to 1/8" thick)
• Comes equipped with a pair of upper and anvil dies
• Manipulate the machine with 110V AC Foot Control included

Jet 756151 45'' WH-45T English Wheel

• Rolls, beads, and forms mild steel sheet metal up to 16 gauge, as well as aluminum and copper up to 1/8" thick
• Gaping 45" throat depth is great for versatile operation
• 4 rolling wheels swivel at 90 degrees, making workplace mobility a cinch

Jet 756203 52" 16GA Pneumatic Shear

• Cuts up to 16 gauge mild steel as well as 12-14 gauge aluminum and copper alloys
• Low cutting angle means narrow strips can be cut without twisting
• Exact bed and beam alignment means accurate cuts are guaranteed

Jet 756216 48" HB-1648H 16GA Bench Hand Brake

• Metalforming applications are easy with this machine
• Welded steel plate body sections contribute to tool's longevity and reliability
• Heavy truss rods and braces supply additional strength

Jet 756222 48" HB-2248H 22 GA Bench Hand Brake

• A great machine for a wide range of metalforming applications
• Welded steel plate body sections and heavy truss rods and braces supply the machine with additional strength and durability
• Accurate results are guaranteed with the precise bed and beam alignment

Jet A619 Flood Coolant System for Milling Machine

• Flood coolant system for 230/460V 3 Ph machines
• Air and coolant line connections are encased in braided metal wire.
• One gallon tank is made of enamel paint finished metal with removable corrostion resistant inner liner.

Jet A630 Air Power Draw Bar for JTM-4VS, JTM-1050 & JTM-1050EVS

• Fits all Jet variable speed milling machines and JTM-1/2 step pulley mills (JTM-1 and 2, JTM-4VS, JTM-1050, JTM-1050EVS)
• High quality industrial grade air motor
• Double impact high torque design