JET 140091 20-1/2'' X 48'' 5,500LB Pallet Truck
JET Tools Logo

JET 140091 PTX-2048 20-1/2'' X 48'' 5,500LB Pallet Truck

  • Capacity: 5,500 pounds
  • Turning Radius: 210 degrees
  • 2-1/2 inch low profile allows for easy engagement of pallets
$484.00
View Item
Special for this item!
Special for this item!
JET 140093 27'' X 48'' 5,500LB Pallet Truck
JET Tools Logo

JET 140093 PTX-2748 27'' X 48'' 5,500LB Pallet Truck

  • Capacity: 5,500 pounds
  • Turning Radius: 210 degrees
  • 2-1/2 inch low profile allows for easy engagement of pallets
$484.00
View Item
Special for this item!
Special for this item!
JET 320033 Radial Drill Press
JET Tools Logo

JET 320033 J-720R 3HP 3PH 230/460V Radial Drill Press

  • High quality powertrain gears and spline shafts are made from heat treated and ground nickel-chrome steel, strengthening and smoothing high torque loads
  • Spindle is made of case hardened steel, increasing strength and resisting damage
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
$11,999.00
View Item
Special for this item!
Special for this item!
JET 320034 4' Arm Radial Arm Drill Press
JET Tools Logo

JET 320034 J-1100R 3HP 3PH 230V 4' Arm Radial Arm Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
$18,999.00
View Item
Special for this item!
Special for this item!
JET 320035 4" Arm Radial Drill Press
JET Tools Logo

JET 320035 J-1100R-4 1.5-3HP 3PH 460V 4" Arm Radial Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose with trust and rasial axis bearings at the top
$19,499.00
View Item
Special for this item!
Special for this item!
JET 320036 4' Arm Radial Drill Press
JET Tools Logo

JET 320036 J-1230R 5HP, 3PH, 230V 4' Arm Radial Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose with thrust and radial axis bearings atthe top
$22,999.00
View Item
Special for this item!
Special for this item!
JET 320037 4' Arm Radial Drill Press
JET Tools Logo

JET 320037 J-1230R-4 5HP, 3PH, 460V 4' Arm Radial Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
$23,999.00
View Item
Special for this item!
Special for this item!
JET 320038 4' Arm Radial Drill Press
JET Tools Logo

JET 320038 J-1230R 7.5HP, 3PH, 230/460V 4' Arm Radial Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
$45,999.00
View Item
Special for this item!
Special for this item!
JET 320039 5' Arm Radial Drill Press
JET Tools Logo

JET 320039 J-1600R-4 7.5HP, 3PH, 230/460V 5' Arm Radial Drill Press

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
$47,999.00
View Item
Special for this item!
Special for this item!
JET 321137 LATHE WITH NEWALL DP700 Digital Readout INSTALLED
JET Tools Logo

JET 321137 GH-1460ZX LATHE WITH NEWALL DP700 Digital Readout INSTALLED

  • Uniquely designed exclusively by JET
  • ISO9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,999.00
View Item
Special for this item!
Special for this item!
JET 321138 LATHE WITH NEWALL DP700 Digital Readout INSTALLED
JET Tools Logo

JET 321138 GH-1640ZX LATHE WITH NEWALL DP700 Digital Readout INSTALLED

  • Uniquely designed exclusively by JET
  • ISO9001 certified manufacter
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,899.00
View Item
Special for this item!
Special for this item!
JET 321139 LATHE WITH NEWALL DP700 Digital Readout INSTALLED
JET Tools Logo

JET 321139 GH-1660ZX LATHE WITH NEWALL DP700 Digital Readout INSTALLED

  • Uniquely designed exclusively for JET
  • IS O9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$19,199.00
View Item
Special for this item!
Special for this item!
JET 321147 LATHE
JET Tools Logo

JET 321147 GH-1640ZX 7.5hp 3ph 14" Swing LATHE WITH NEWALL DP700 Digital Readout TAPER ATTACHMENT & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO9001 certified manufacter
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$20,099.00
View Item
Special for this item!
Special for this item!
JET 321148 LATHE
JET Tools Logo

JET 321148 GH-1640ZX 7.5hp 3ph 16" Swing LATHE WITH NEWALL C80 Digital Readout & TAPER ATTACHMENT

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,599.00
View Item
Special for this item!
Special for this item!
JET 321301 Large Spindle Bore Lathe
JET Tools Logo

JET 321301 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 300S Digital Readout

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,399.00
View Item
Special for this item!
Special for this item!
JET 321302 Large Spindle Bore Lathe
JET Tools Logo

JET 321302 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 300S Digital Readout, Taper Attachment & Collet Closer

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$19,599.00
View Item
Special for this item!
Special for this item!
JET 321303 Large Spindle Bore Lathe
JET Tools Logo

JET 321303 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 300S Digital Readout & Taper Attachment

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$17,999.00
View Item
Special for this item!
Special for this item!
JET 321304 Large Spindle Bore Lathe
JET Tools Logo

JET 321304 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 300S Digital Readout & Collet Closer

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$17,999.00
View Item
Special for this item!
Special for this item!
JET 321311 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321311 GH-1460ZX LATHE WITH ACU-RITE 300S Digital Readout

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,999.00
View Item
Special for this item!
Special for this item!
JET 321312 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321312 GH-1460ZX LATHE WITH ACU-RITE 300S Digital Readout & TAPER ATTACHMENT

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$17,899.00
View Item
Special for this item!
Special for this item!
JET 321313 LATHE
JET Tools Logo

JET 321313 GH-1460ZX LATHE WITH ACU-RITE 300S Digital Readout TAPER ATTACHMENT & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$20,099.00
View Item
Special for this item!
Special for this item!
JET 321315 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321315 GH-1460ZX LATHE WITH ACU-RITE 300S Digital Readout & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$17,899.00
View Item
Special for this item!
Special for this item!
JET 321381 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321381 GH-1640ZX LATHE WITH ACU-RITE 300S Digital Readout

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,899.00
View Item
Special for this item!
Special for this item!
JET 321382 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321382 GH-1640ZX LATHE WITH ACU-RITE 300S Digital Readout & TAPER ATTACHMENT

  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
  • Chrome molybdenum headstock gears are hardened, ground and shaved
  • Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
$18,599.00
View Item
Special for this item!
Special for this item!
JET 321383 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321383 GH-1640ZX LATHE WITH ACU-RITE 300S Digital Readout & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$18,599.00
View Item
Special for this item!
Special for this item!
JET 321388 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321388 GH-1660ZX LATHE WITH ACU-RITE 300S Digital Readout

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$18,999.00
View Item
Special for this item!
Special for this item!
JET 321389 LATHE WITH ACU-RITE 300S Digital Readou
JET Tools Logo

JET 321389 GH-1660ZX LATHE WITH ACU-RITE 300S Digital Readou t & TAPER ATTACHMENT

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$20,699.00
View Item
Special for this item!
Special for this item!
JET 321390 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321390 GH-1660ZX LATHE WITH ACU-RITE 300S Digital Readout & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$20,699.00
View Item
Special for this item!
Special for this item!
JET 321391 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321391 GH-1660ZX LATHE WITH ACU-RITE 300S Digital Readout TAPER ATTACHMENT & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$21,999.00
View Item
Special for this item!
Special for this item!
JET 321415 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321415 GH-1840ZX LATHE WITH ACU-RITE 300S Digital Readout

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$18,099.00
View Item
Special for this item!
Special for this item!
JET 321416 Lathe with 300S and Collet Closer
JET Tools Logo

JET 321416 GH-1840ZX Lathe with 300S and Collet Closer

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$19,399.00
View Item
Special for this item!
Special for this item!
JET 321417 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321417 GH-1840ZX LATHE WITH ACU-RITE 300S Digital Readout TAPER ATTACHMENT & COLLET CLOSER

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$21,099.00
View Item
Special for this item!
Special for this item!
JET 321418 LATHE WITH ACU-RITE 300S Digital Readout
JET Tools Logo

JET 321418 GH-1840ZX LATHE WITH ACU-RITE 300S Digital Readout & TAPER ATTACHMENT

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$19,399.00
View Item
Special for this item!
Special for this item!
JET 321439 Lathe with Collet Closer
JET Tools Logo

JET 321439 GH-1640ZX Lathe with Collet Closer

  • Uniquely designed exclusively by JET
  • IS O9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,099.00
View Item
Special for this item!
Special for this item!
JET 321440 Lathe with 2-Axis ACU-RITE 200S
JET Tools Logo

JET 321440 GH-1660ZX Lathe with 2-Axis ACU-RITE 200S & Collet Closer Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$20,599.00
View Item
Special for this item!
Special for this item!
JET 321441 Large Spindle Bore Lathe
JET Tools Logo

JET 321441 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with DP700 Digital Readout and Collet Closer

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$17,799.00
View Item
Special for this item!
Special for this item!
JET 321448 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321448 GH-1840ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S & COLLET CLOSER INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$19,399.00
View Item
Special for this item!
Special for this item!
JET 321452 LATHE WITH NEWALL DP700 Digital Readout
JET Tools Logo

JET 321452 GH-1860ZX LATHE WITH NEWALL DP700 Digital Readout & TAPER ATTACHMENT

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$21,899.00
View Item
Special for this item!
Special for this item!
JET 321454 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321454 GH-1840ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S & TAPER ATTACHMENT & COLLET CLOSER INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$20,999.00
View Item
Special for this item!
Special for this item!
JET 321455 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321455 GH-1660ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,999.00
View Item
Special for this item!
Special for this item!
JET 321463 Lathe with Taper Attachment Installed
JET Tools Logo

JET 321463 GH-1860ZX-TAK Lathe with Taper Attachment Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$18,099.00
View Item
Special for this item!
Special for this item!
JET 321466 Lathe with Taper Attachment Installed
JET Tools Logo

JET 321466 GH-1840ZX-TAK Lathe with Taper Attachment Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$17,199.00
View Item
Special for this item!
Special for this item!
JET 321467 Large Spindle Bore Lathe
JET Tools Logo

JET 321467 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with Taper Attachment

  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
  • Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
  • Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
$15,599.00
View Item
Special for this item!
Special for this item!
JET 321469 Large Spindle Bore Lathe
JET Tools Logo

JET 321469 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 2-Axis Digital Readout 200S

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$16,399.00
View Item
Special for this item!
Special for this item!
JET 321470 Large Spindle Bore Lathe
JET Tools Logo

JET 321470 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with DP700 Digital Readout

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$16,399.00
View Item
Special for this item!
Special for this item!
JET 321474 Lathe with Taper Attachment Installed
JET Tools Logo

JET 321474 GH-1640ZX-TAK Lathe with Taper Attachment Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,099.00
View Item
Special for this item!
Special for this item!
JET 321475 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321475 GH-1640ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$16,699.00
View Item
Special for this item!
Special for this item!
JET 321477 Lathe with Taper Attachment Installed
JET Tools Logo

JET 321477 GH-1660ZX-TAK Lathe with Taper Attachment Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,999.00
View Item
Special for this item!
Special for this item!
JET 321478 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321478 GH-1460ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$16,799.00
View Item
Special for this item!
Special for this item!
JET 321480 Lathe wtih Taper Attachement Installed
JET Tools Logo

JET 321480 GH-1460ZX Lathe wtih Taper Attachement Installed

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$16,299.00
View Item
Special for this item!
Special for this item!
JET 321481 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321481 GH-1840ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$17,799.00
View Item
Special for this item!
Special for this item!
JET 321483 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321483 GH-1840ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S & TAPER ATTACHMENT INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$19,399.00
View Item
Special for this item!
Special for this item!
JET 321484 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321484 GH-1860ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,699.00
View Item
Special for this item!
Special for this item!
JET 321486 Lathe with Taper Attachment Installed
JET Tools Logo

JET 321486 GH-1880ZX Lathe with Taper Attachment Installed

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$18,199.00
View Item
Special for this item!
Special for this item!
JET 321487 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321487 GH-1880ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S Digital Readout 200S INSTALLED

  • 16", 18" , and 22" zx series large bore spindle lathes
  • Uniquely designed exclusively by JET
  • ISO 9001 certified manfacturer
$18,999.00
View Item
Special for this item!
Special for this item!
JET 321488 LATHE WITH 2-AXIS NEWALL DP700 Digital Readout
JET Tools Logo

JET 321488 GH-1880ZX LATHE WITH 2-AXIS NEWALL DP700 Digital Readout Digital Readout INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,999.00
View Item
Special for this item!
Special for this item!
JET 321490 LATHE WITH ACU-RITE 200S Digital Readout
JET Tools Logo

JET 321490 GH-1460ZX LATHE WITH ACU-RITE 200S Digital Readout AND COLLET CLOSER

  • Uniquely designed by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,299.00
View Item
Special for this item!
Special for this item!
JET 321491 LATHE WITH 2-AXIS ACU-RITE 200S Digital Readout
JET Tools Logo

JET 321491 GH-1860ZX LATHE WITH 2-AXIS ACU-RITE 200S Digital Readout AND COLLET CLOSER INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$21,899.00
View Item
Special for this item!
Special for this item!
JET 321492 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321492 GH-1880ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S AND COLLET CLOSER INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$20,499.00
View Item
Special for this item!
Special for this item!
JET 321493 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321493 GH-1880ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S COLLET CLOSER AND TAPER ATTACHMENT INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$22,099.00
View Item
Special for this item!
Special for this item!
JET 321494 Lathe with Newall DP700L with Collet Closer
JET Tools Logo

JET 321494 GH-1640ZX Lathe with Newall DP700L with Collet Closer

  • Uniquely designed exclusively by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,299.00
View Item
Special for this item!
Special for this item!
JET 321495 Lathe with ACU-RITE 200S Collet Closer
JET Tools Logo

JET 321495 GH-1640ZX Lathe with ACU-RITE 200S Collet Closer

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,299.00
View Item
Special for this item!
Special for this item!
JET 321496 Lathe with Collet Closer
JET Tools Logo

JET 321496 GH-2280ZX Lathe with Collet Closer

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
$20,799.00
View Item
Special for this item!
Special for this item!
JET 321498 Large Spindle Bore Lathe
JET Tools Logo

JET 321498 GH-1440ZX 14" x 40" Large Spindle Bore Lathe DP700 Digital Readout 2 Axis with Taper Att & Collet Closer

  • Uniquely designed by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$19,399.00
View Item
Special for this item!
Special for this item!
JET 321501 Large Spindle Bore Lathe
JET Tools Logo

JET 321501 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 200T Digital Readout and Collet Closer

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$17,799.00
View Item
Special for this item!
Special for this item!
JET 321502 Metalworkign Lathe w/ Newall DP700 DRO
JET Tools Logo

JET 321502 GH-1660ZX Metalworkign Lathe w/ Newall DP700 DRO + Taper Attachment & Collet Closer

  • 3-1/8" bore spindle is supported by two tapered and one ball bearings
  • Chrome molybdenum headstock gears are hardened, ground and shaved
  • Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
$19,199.00
View Item
Special for this item!
Special for this item!
JET 321503 LATHE WITH ACU-RITE 200S Digital Readout
JET Tools Logo

JET 321503 GH-1460ZX LATHE WITH ACU-RITE 200S Digital Readout AND TAPER ATTACHMENT INSTALLED

  • Uniquely designed by JET
  • ISO9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$18,299.00
View Item
Special for this item!
Special for this item!
JET 321504 LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S
JET Tools Logo

JET 321504 GH-1860ZX LATHE WITH 2-AXIS ACU-RITE Digital Readout 200S AND TAPER ATTACHMENT INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$21,899.00
View Item
Special for this item!
Special for this item!
JET 321505 LATHE WITH 2-AXIS ACU-RITE 200S Digital Readout
JET Tools Logo

JET 321505 GH-1860ZX LATHE WITH 2-AXIS ACU-RITE 200S Digital Readout TAPER ATTACHMENT AND COLLET CLOSER INSTALLED

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$23,499.00
View Item
Special for this item!
Special for this item!
JET 321507 Large Spindle Bore Lathe
JET Tools Logo

JET 321507 GH-1440ZX 14" x 40" Large Spindle Bore Lathe with 200S Digital Readout and Taper Attachment

  • Uniquely designed by JET
  • ISO 9001 certified manufacturer
  • 3-1/8? bore spindle is supported by two tapered and one ball bearing
$17,799.00
View Item
Special for this item!
Special for this item!
JET 414203K Manual Cold Saw Non-Ferrous 350mm
JET Tools Logo

JET 414203K J-CK350-2K 2HP 3PH 230V Manual Cold Saw Non-Ferrous 350mm

  • Non-Ferrous cold saw
  • High speed manual saw
  • Mitering capabilities - stops 90°, 45° left and 45° right
$4,299.00
View Item
Special for this item!
Special for this item!
JET 414207K Manual Cold Saw Non-Ferrous 350mm
JET Tools Logo

JET 414207K J-CK350-4K 3HP 3PH 460V Manual Cold Saw Non-Ferrous 350mm

  • Non-Ferrous cold saw
  • High speed manual saw
  • Mitering capabitlities - stops at 90°, 45° left and 45° right
$4,299.00
View Item
Special for this item!
Special for this item!
JET 414214K Manual Cold Saw Ferrous 350mm
JET Tools Logo

JET 414214K J-FK350-2K 2HP 3PH 230V Manual Cold Saw Ferrous 350mm

  • Ferrous cold saw
  • Manual saw
  • Sturdy gear box design
$4,299.00
View Item
Special for this item!
Special for this item!
JET 414217K Manual Cold Saw Ferrous 350mm
JET Tools Logo

JET 414217K J-FK350-4K 3HP 3PH 460V Manual Cold Saw Ferrous 350mm

  • Ferrous cold saw
  • Manual saw
  • Sturdy gear box design
$4,499.00
View Item
Special for this item!
Special for this item!
JET 414453 5 x 8 Horizontal Band Saw Wet
JET Tools Logo

JET 414453 J-3230 1/2 HP 1PH 115V 5 x 8 Horizontal Band Saw Wet

  • Adjustable hydraulic feed system
  • Adjustable ball bearing guides
  • Heat treated steel worm gear and bronze driver gear
$829.00
View Item
Special for this item!
Special for this item!
JET 414457 Swivel Head Bandsaw
JET Tools Logo

JET 414457 HBS-56S 5" x 6" Swivel Head Bandsaw

  • Head swivels for a maximum cut at 45 & 60 Degrees
  • Hydraulic down feed control
  • Deluxe enclosed stand with handle and wheels for easy movement
$829.00
View Item
Special for this item!
Special for this item!
JET 414464 7" Zip Miter Horizontal Band Saw
JET Tools Logo

JET 414464 J-9180-3 7" Zip Miter Horizontal Band Saw

  • Adjustable hydraulic feed system
  • Eccentric shaft ball bearings
  • Heavy duty cast iron saw head and sturdy base
$2,299.00
View Item
Special for this item!
Special for this item!
JET 414467 8-3/4" Zip Miter Horizontal Band Saw
JET Tools Logo

JET 414467 J-9225 1.5HP 3PH 230V 8-3/4" Zip Miter Horizontal Band Saw

  • Adjustable hydraulic feed system
  • Eccentric shaft, ball bearings
  • Heavy duty cast iron saw head and sturdy base
$3,699.00
View Item
Special for this item!
Special for this item!
JET 414474 Horizontal Mitering Band Saw
JET Tools Logo

JET 414474 J-7020M 1.5HP 1PH 115/230V Horizontal Mitering Band Saw

  • Variable speed drive system allows the operator to fine tune the blade speed fast and easily
  • Exclusive 6 contact point blade adjustable guide assemblies
  • Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings share the load equally
$6,899.00
View Item
Special for this item!
Special for this item!
JET 414475 10 x 16 Horiz Mitering Band Saw
JET Tools Logo

JET 414475 J-7040M 2HP 3PH 230/460V 10 x 16 Horiz Mitering Band Saw

  • Variable speed drive system allows the operator to fine tune the blade speed fast and easily
  • Exclusive 6 contact point blade adjustable guide assemblies
  • Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings the load equally
$6,899.00
View Item
Special for this item!
Special for this item!
JET 414476-4 12 x 20 Semi-Auto Horiz Band Saw
JET Tools Logo

JET 414476-4 J-7060-4 3HP 3PH 440V 12 x 20 Semi-Auto Horiz Band Saw

  • Variable speed drive system allows the operator to fine tune the blade speed fast and easily
  • Exclusive swivel control panel
  • Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
$9,999.00
View Item
Special for this item!
Special for this item!
JET 414484 10 x 16 Miter Band Saw
JET Tools Logo

JET 414484 J-7040M-4 2HP 3PH 230/460V 10 x 16 Miter Band Saw

  • Variable speed drive system allows the operator to fine tune th eblade speed fast and easily
  • Exclusive 6 contact point blade guide assemblies
  • One piece wheel cover
$6,999.00
View Item
Special for this item!
Special for this item!
JET 414551 Industrial Belt & Disc Machine
JET Tools Logo

JET 414551 J-4200A Industrial Belt & Disc Machine

  • Belt operates at any angle
  • Powered by a heavy duty 1-1/2 HP TEFC motor
  • Contour finishing, mitering, flat finishing, beveling and precision finishing
$1,399.00
View Item
Special for this item!
Special for this item!
JET 414552 Industrial Belt & Disc
JET Tools Logo

JET 414552 J-4200A-2 1.5HP 1PH 230V Industrial Belt & Disc

  • Belt operates at any angle
  • Powered by a heavy duty UL/CSA approved, 1-1/2 HP TEFC motor
  • Contour finishing, mitering, flat finishing, beveling and precision finishing
$1,399.00
View Item
Special for this item!
Special for this item!
JET 414553 Industrial Belt & Disc Machine
JET Tools Logo

JET 414553 J-4202A 1.5HP 3PH 230V Industrial Belt & Disc Machine

  • Belt operates at any angle
  • Powered by a heavy duty 1.5 HP TEFC motor
  • Contour finishing, mitering, flat finishing, beveling and precision finishing
$1,449.00
View Item
Special for this item!
Special for this item!
JET 414600 6x48 Industrial Belt Machine
JET Tools Logo

JET 414600 J-4300A 1.5HP 1PH 115/230V 6x48 Industrial Belt Machine

  • Table tilts 45° out and 20° in for all angle finishing operations
  • Adjustable dust deflector for and dust chute
  • Completely enclosed drums and a guarded sanding belt
$1,199.00
View Item
Special for this item!
Special for this item!
JET 414601 6x48 Industrial Belt Machine
JET Tools Logo

JET 414601 J-4301A 1.5HP 3PH 230V 6x48 Industrial Belt Machine

  • Table tilts 45° out and 20° in for all angle finishing operations
  • Adjustable dust deflector and dust chute
  • Completely enclosed drums and a guarded sanding belt
$1,199.00
View Item
Special for this item!
Special for this item!
JET 414610 3 x 79 Belt Grinder
JET Tools Logo

JET 414610 BG-379-1 4HP, 1PH, 220V 3 x 79 Belt Grinder

  • Pivots up and down on base for easy and safe work height adjustments
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
$1,099.00
View Item
Special for this item!
Special for this item!
JET 414615 3x79 Belt Grinder
JET Tools Logo

JET 414615 BG-379-3 4HP, 3PH, 220V 3x79 Belt Grinder

  • Pivots up and down on base for easy and safe work height adjustments
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
$1,099.00
View Item
Special for this item!
Special for this item!
JET 577003 1 x 42 Bench Belt & Disc Sander
JET Tools Logo

JET 577003 J-4002 1/3HP 1PH 115V 1 x 42 Bench Belt & Disc Sander

  • Hinged idler wheel cover
  • Deluxe miter gauge turns and locks for common angles 45° left and right
$439.00
View Item
Special for this item!
Special for this item!
JET 577004 2X42 Bench Belt & 8" Disc Sander
JET Tools Logo

JET 577004 J-41002 3/4HP 1PH 115V 2X42 Bench Belt & 8" Disc Sander

  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Hinged idler wheel cover
  • Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles
$455.00
View Item
Special for this item!
Special for this item!
JET 577010 20" Disc Sander
JET Tools Logo

JET 577010 J-4421-2 3HP 3PH 230V 20" Disc Sander

  • Tilting table capability adds flexibility of 45° forward and 15° backward on positive lock rack and gear
  • Table can be lowered below the disc to accomodate large work pieces
  • Direct drive motor
$2,099.00
View Item
Special for this item!
Special for this item!
JET 587814 Red Head Bolt Cutter
JET Tools Logo

JET 587814 BC-14RC 14" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$29.00
View Item
Special for this item!
Special for this item!
JET 587818 Red Head Bolt Cutter
JET Tools Logo

JET 587818 BC-18RC 18" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$34.00
View Item
Special for this item!
Special for this item!
JET 587824 Red Head Bolt Cutter
JET Tools Logo

JET 587824 BC-24RC 24" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$44.00
View Item
Special for this item!
Special for this item!
JET 587830 Red Head Bolt Cutter
JET Tools Logo

JET 587830 BC-30RC 30" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$49.00
View Item
Special for this item!
Special for this item!
JET 587836 Red Head Bolt Cutter
JET Tools Logo

JET 587836 BC-36RC 36" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$59.00
View Item
Special for this item!
Special for this item!
JET 587842 Red Head Bolt Cutter
JET Tools Logo

JET 587842 BC-42RC 42" Red Head Bolt Cutter

  • Durability
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Rubber gripped all steel handles are angled for maximum leverage reducing operator fatigue
$99.00
View Item
Special for this item!
Special for this item!
JET 650015 Premium 18 Piece 5-C Collet Set With Rack
JET Tools Logo

JET 650015 Premium 18 Piece 5-C Collet Set With Rack

  • Premium set, 18 collets 1/16 to 1-1/8 by 16ths with metal rack
$139.00
View Item
Special for this item!
Special for this item!
JET 650016 Premium 35 Piece 5-C Collet Set with Rack
JET Tools Logo

JET 650016 Premium 35 Piece 5-C Collet Set with Rack

  • Premium set, 35 pcs, 1/16 to 1-1/8 by 32nds with metal rack
$349.00
View Item
Special for this item!
Special for this item!
JET 650135 Premium 19 Piece R-8 Collet Set With Rack
JET Tools Logo

JET 650135 Premium 19 Piece R-8 Collet Set With Rack

  • PREMIUM 19 PC R-8 COLLET SET 2.0mm BY 20.0MM BY 1.0mm WITH RACK
$159.00
View Item
Special for this item!
Special for this item!
JET 660200 22 Piece Turning Tool Kit
JET Tools Logo

JET 660200 22 Piece Turning Tool Kit for 13'' and 14'' Lathes

  • Complete 22 piece set
  • Compatible with 13" & 14" W Series Lathes
  • Compatible with 13" & 14" Bench Series Lathes
$199.00
View Item
Special for this item!
Special for this item!
JET 660210 23 Piece Turning Tool Kit
JET Tools Logo

JET 660210 23 Piece Turning Tool Kit for ZX Series Lathes

  • Set consists of the following:
  • 1/2" x9" Double end boring bar
  • 5/8"x10" Double end boring bar
$229.00
View Item
Special for this item!
Special for this item!
JET 690011 Mill
JET Tools Logo

JET 690011 JTM1050EVS 3HP 3PH 230V Mill PLUS X Table Powerfeed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$12,999.00
View Item
Special for this item!
Special for this item!
JET 690050 VS Vertical Milling Machine
JET Tools Logo

JET 690050 JTM-1050 3HP 3PH 230/460V VS Vertical Milling Machine

  • Variable speed vertical milling machine - jtm-1050
  • Meehanite casting
  • Hardened and ground table
$9,999.00
View Item
Special for this item!
Special for this item!
JET 690087 Mill
JET Tools Logo

JET 690087 JTM-4VS Mill PLUS NEWALL DP700 DRO and X Powerfeed Installed

  • Meehanite casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$9,499.00
View Item
Special for this item!
Special for this item!
JET 690117 Mill
JET Tools Logo

JET 690117 JTM-1050 Mill PLUS ACU-RITE 200S DRO & X Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$11,399.00
View Item
Special for this item!
Special for this item!
JET 690120 Mill
JET Tools Logo

JET 690120 JTM-1050 3HP 3PH 230/460V Mill PLUS X Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$10,699.00
View Item
Special for this item!
Special for this item!
JET 690127 Mill
JET Tools Logo

JET 690127 JTM-1050EVS/230 3HP 3PH 230V Mill PLUS ACU-RITE 200S DRO and X Powerfeed Installed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$15,345.00
View Item
Special for this item!
Special for this item!
JET 690129 Mill w/ Newall DP700 DRO, X+Y-Axis Powerfeeds
JET Tools Logo

JET 690129 JTM-1050EVS Mill w/ Newall DP700 DRO, X+Y-Axis Powerfeeds

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$15,845.00
View Item
Special for this item!
Special for this item!
JET 690137 EVS/460 Mill
JET Tools Logo

JET 690137 JTM-1050 3HP 3PH 460V EVS/460 Mill PLUS ACU-RITE 200S DRO and X Powerfeed Installed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$14,745.00
View Item
Special for this item!
Special for this item!
JET 690150 Mill
JET Tools Logo

JET 690150 JTM-1050 3HP 3PH 230/460V Mill PLUS X & Y Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$11,599.00
View Item
Special for this item!
Special for this item!
JET 690151 Mill
JET Tools Logo

JET 690151 JTM-1050 3HP 3PH 230/460V Mill PLUS 200S 3-Q, X and Y TPFA and Air Drawer

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$15,899.00
View Item
Special for this item!
Special for this item!
JET 690154 Mill
JET Tools Logo

JET 690154 JTM-1050EVS/460 3HP 3PH 450V Mill PLUS ACU-RITE 200S DRO, X & Y Powerfeed Installed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$15,545.00
View Item
Special for this item!
Special for this item!
JET 690158 Mill
JET Tools Logo

JET 690158 JTM-1050 3HP 3PH 230/460V Mill PLUS 3-Axis ACU-RITE 200S DRO and X Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$12,099.00
View Item
Special for this item!
Special for this item!
JET 690159 Mill
JET Tools Logo

JET 690159 JTM-1050 3HP 3PH 230/460V Mill PLUS 3-Axis ACU-RITE 200S DRO, X & Y Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$13,899.00
View Item
Special for this item!
Special for this item!
JET 690160 Vertical Milling Machine
JET Tools Logo

JET 690160 JTM1050 Vertical Milling Machine with AC 3AX&TPFA-2X&TPFA-2Y&TPFA-2Z

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$14,799.00
View Item
Special for this item!
Special for this item!
JET 690189 Vertical Milling Machine
JET Tools Logo

JET 690189 JTM-1050EVS/460 3HP 3PH 460V Vertical Milling Machine PLUS X-Table Powerfeed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$12,999.00
View Item
Special for this item!
Special for this item!
JET 690214 Vertical Milling Machine
$12,899.00
View Item
Special for this item!
Special for this item!
JET 690235 Vertical Milling Machine
JET Tools Logo

JET 690235 JTM1050 3HP 3PH 230/460V Vertical Milling Machine PLUS 200S,XTPFA,DRW Bar and Riser Block

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$15,199.00
View Item
Special for this item!
Special for this item!
JET 690257 Vertical Milling Machine
JET Tools Logo

JET 690257 JTM-1050EVS/230 3HP 3PH 230V Vertical Milling Machine PLUS ACU-RITE 200S DRO, X-AXIS POWERFEED & AIR POWER DRAW BAR

  • Runs quieter and smoother than coventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at the spindle
$15,645.00
View Item
Special for this item!
Special for this item!
JET 690265 Vertical Milling Machine
JET Tools Logo

JET 690265 JTM-4VS 3HP 3PH 230/460V Vertical Milling Machine PLUS VUE DRO, X-TPFA & Riser Block

  • Meehanite Casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$9,499.00
View Item
Special for this item!
Special for this item!
JET 690269 Vertical Milling Machine
JET Tools Logo

JET 690269 JTM-1054R 5HP 3PH 230/460V Vertical Milling Machine PLUS X-Axis Powerfeed

  • Meehanite casting
  • Hardened and ground table certified to be 52C Rockwell hardness
  • Chrome leadscrews on X and Y axis
$13,999.00
View Item
Special for this item!
Special for this item!
JET 690270 Vertical Milling Machine
JET Tools Logo

JET 690270 JTM-1054R 5HP 3PH 230/460V Vertical Milling Machine PLUS VUE DRO and X-TPFA

  • Meehanite casting
  • Hardened and ground table certified to be 52C Rockwell hardness
  • Chrome lead screws on X and Y axis
$15,845.00
View Item
Special for this item!
Special for this item!
JET 690271 Vertical Milling Machine
JET Tools Logo

JET 690271 JTM-1054R 5HP 3PH 230/460V Vertical Milling Machine PLUS 200S DRO & X-TPFA

  • Meehanite casting
  • Hardened and ground table certified to be 52C Rockwell hardness
  • Chrome lead screws on X and Y axis
$16,045.00
View Item
Special for this item!
Special for this item!
JET 690306 Vertical Milling Machine
JET Tools Logo

JET 690306 JTM-1050 Vertical Milling Machine PLUS 300S DRO and X-TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$12,499.00
View Item
Special for this item!
Special for this item!
JET 690307 Vertical Milling Machine
JET Tools Logo

JET 690307 JTM-1050 Vertical Milling Machine PLUS 300S DRO, X and Y-TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$13,299.00
View Item
Special for this item!
Special for this item!
JET 690313 Vertical Milling Machine
JET Tools Logo

JET 690313 JTM-1050EVS/460 5HP 3PH 230/460V Vertical Milling Machine PLUS 300S DRO, X&YTPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$16,645.00
View Item
Special for this item!
Special for this item!
JET 690316 Vertical Milling Machine
JET Tools Logo

JET 690316 JTM-1050EVS/460 5HP 3PH 230/460V Vertical Milling Machine PLUS 300S DRO and X-TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$15,845.00
View Item
Special for this item!
Special for this item!
JET 690401 Vertical Milling Machine
JET Tools Logo

JET 690401 JTM-4VS 3HP 3PH 230/460V Vertical Milling Machine PLUS Anilam 411 DRO and X AXIS TPFA

  • Meehanite casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$8,999.00
View Item
Special for this item!
Special for this item!
JET 690402 Vertical Milling Machine
JET Tools Logo

JET 690402 JTM-4VS-1 2HP 3PH 115/230V Vertical Milling Machine PLUS 411 DRO and X-AXIS TPFA

  • Variable speed vertical milling machine - jtm-4vs
  • Meehanite casting
  • Precision bored and honed milling head
$9,199.00
View Item
Special for this item!
Special for this item!
JET 690403 Vertical Milling Machine
JET Tools Logo

JET 690403 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS VUE DRO and X-AXIS TPFA

  • Variable speed vertical milling machine - jtm-1050
  • Meehanite casting
  • Hardened and ground table
$12,299.00
View Item
Special for this item!
Special for this item!
JET 690404 Mill
JET Tools Logo

JET 690404 JTM-1050EVS/230 Mill with 411 DRO & X-Axis TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$15,145.00
View Item
Special for this item!
Special for this item!
JET 690405 Mill
JET Tools Logo

JET 690405 JTM-1050EVS/460 Mill with 411 DRO & X-Axis TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$14,845.00
View Item
Special for this item!
Special for this item!
JET 690406 Vertical Milling Machine
JET Tools Logo

JET 690406 JTM-1050EVS/230 3HP 3PH 230V Vertical Milling Machine PLUS 200S, X and Y TPFA

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$16,145.00
View Item
Special for this item!
Special for this item!
JET 690407 Vertical Milling Machine
JET Tools Logo

JET 690407 JTM-4VS-1 2HP 1PH 115/230V Vertical Milling Machine PLUS VUE DRO, X and Y TPFA

  • Meehanite casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$9,699.00
View Item
Special for this item!
Special for this item!
JET 690409 Vertical Milling Machine
JET Tools Logo

JET 690409 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS VUE DRO & X-TPFA

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$12,499.00
View Item
Special for this item!
Special for this item!
JET 690414 EVS MILL Package X and Y Axis
JET Tools Logo

JET 690414 JTM-1050 EVS MILL Package X and Y Axis

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$15,945.00
View Item
Special for this item!
Special for this item!
JET 690420 Vertical Milling Machine
JET Tools Logo

JET 690420 JTM-4VS 3HP 3PH 230/460V Vertical Milling Machine PLUS ACU-RITE VUE DRO, X & Y POWERFEED

  • Meehanite casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$10,999.00
View Item
Special for this item!
Special for this item!
JET 691172 Vertical Milling Machine
JET Tools Logo

JET 691172 JTM-1050 3HP 3PH 230V Vertical Milling Machine PLUS DP700 DRO and Air POWER Draw Bar

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$12,499.00
View Item
Special for this item!
Special for this item!
JET 691200 Vertical Milling Machine
JET Tools Logo

JET 691200 JTM-4VS 3HP 3PH 230/460V Vertical Milling Machine PLUS NEWALL DP700 DRO Installed

  • Meehanite casting
  • Precision bored and honed milling head
  • Large diameter quill is chromed
$8,999.00
View Item
Special for this item!
Special for this item!
JET 691204 Vertical Milling Machine
JET Tools Logo

JET 691204 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS NEWALL DP700 DRO

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$11,099.00
View Item
Special for this item!
Special for this item!
JET 691205 Vertical Milling Machine
JET Tools Logo

JET 691205 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS NEWALL DP700 DRO and X Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$11,999.00
View Item
Special for this item!
Special for this item!
JET 691206 Vertical Milling Machine
JET Tools Logo

JET 691206 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS NEWALL DP700 DRO and X&Y Powerfeed Installed

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$12,699.00
View Item
Special for this item!
Special for this item!
JET 691207 Vertical Milling Machine
JET Tools Logo

JET 691207 JTM-1050 3HP 3PH 230/460V Vertical Milling Machine PLUS NEWALL DP700 3-Axis (Quill) DRO

  • Meehanite casting
  • Hardened and ground table
  • Chrome lead screws on X and Y axis
$11,099.00
View Item
Special for this item!
Special for this item!
JET 691208 Vertical Milling Machine
$12,099.00
View Item
Special for this item!
Special for this item!
JET 691209 Vertical Milling Machine
$12,999.00
View Item
Special for this item!
Special for this item!
JET 691211 Vertical Milling Machine
JET Tools Logo

JET 691211 JTM-1050EVS/230 3HP 3PH 230V Vertical Milling Machine PLUS NEWALL DP700 DRO and X Powerfeed Installed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$14,999.00
View Item
Special for this item!
Special for this item!
JET 691217 Vertical Milling Machine
JET Tools Logo

JET 691217 JTM-1050EVS/460 3HP 3PH 460V Vertical Milling Machine PLUS NEWALL DP700 DRO and X Powerfeed Installed

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$14,999.00
View Item
Special for this item!
Special for this item!
JET 691218 Vertical Milling Machine
JET Tools Logo

JET 691218 JTM-1050EVS/460 3HP 3PH 460V Vertical Milling Machine PLUS NEWALL 3-Axis (Quill) DP700 DRO

  • Runs quieter and smoother than conventional variable speed head
  • Low maintenance head has less moving parts
  • No belt slippage allows more power at spindle
$15,545.00
View Item
Special for this item!
Special for this item!
JET 752002 Hand Brake
JET Tools Logo

JET 752002 HB-1697H Hand Brake

  • Simplicity of design, improved truss rod construction and a minimum number of moving parts make the JET hand brake easy to operate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Both the bed and apron are bored in line to assure the utmost in accuracy
$4,899.00
View Item
Special for this item!
Special for this item!
JET 752125 Box & Pan Brake Foot Clamp
JET Tools Logo

JET 752125 40'' X 12GA Box & Pan Brake Foot Clamp

  • A wide range of finger widths are included for many different bending applications
  • Black Ceramic Coated Fingers prevent rust and decay, delivering long and reliable life
  • Welded steel plate frame (with heavy truss rods and braces) make this machine strong and sturdy
$2,199.00
View Item
Special for this item!
Special for this item!
JET 752127 Box & Pan Brake Foot Clamp
JET Tools Logo

JET 752127 50'' X 14GA Box & Pan Brake Foot Clamp

  • Includes 11 different fingers, great for a wide range of bending applications
  • Fingers feature Fingers feature Black Ceramic Coating, resisting rust and ensuring long and reliable life
  • All body sections are strengthened and protected by welded steel plate and heavy truss rods and braces
$2,399.00
View Item
Special for this item!
Special for this item!
JET 756027 Single Phase Electrical Power Slip Roll
JET Tools Logo

JET 756027 50'' Single Phase Electrical Power Slip Roll

  • A great machine for sheet metal forming in both HVAC and FAB shops
  • Foot pedal allows for immediate forward and reverse roll drive control
  • Strong and sturdy machine has a heavy duty cast iron frame and enclosed base
$2,999.00
View Item
Special for this item!
Special for this item!
JET 756028 50'' Electrical Power Slip Roll (3PH)
JET Tools Logo

JET 756028 50'' Electrical Power Slip Roll (3PH)

  • An essential machine for sheet metal forming in HVAC and FAB shops
  • Switch between forward and reverse action on a dime with the foot petal roll drive
  • High quality rolls are made of hardened polished high-carbon steel
$2,999.00
View Item
Special for this item!
Special for this item!
JET 756121 Planishing Hammer
JET Tools Logo

JET 756121 PH-24 24'' Planishing Hammer

  • Smoothes beads and forms mild steel sheet metal (up to 16 gauge), aluminum, and copper (up to 1/8" thick)
  • Comes equipped with a pair of upper and anvil dies
  • Manipulate the machine with 110V AC Foot Control included
$1,359.00
View Item
Special for this item!
Special for this item!
JET 756151 English Wheel
JET Tools Logo

JET 756151 WH-45T 45'' English Wheel

  • Rolls, beads, and forms mild steel sheet metal up to 16 gauge, as well as aluminum and copper up to 1/8" thick
  • Gaping 45" throat depth is great for versatile operation
  • 4 rolling wheels swivel at 90 degrees, making workplace mobility a cinch
$1,999.00
View Item
Special for this item!
Special for this item!
JET JSM-3330 3/8'' Air Ratchet
JET Tools Logo

JET JSM-3330 3/8'' Air Ratchet

  • Ergonomically designed grip for reduced operator fatigue
  • Designed for reduced vibration
  • Exhaust silencer provides quiet operation at 79 db
$159.00
View Item
Special for this item!
Special for this item!
JET JSM-3430 1/2'' Air Ratchet
JET Tools Logo

JET JSM-3430 1/2'' Air Ratchet

  • Ergonomically designed grip for reduced operator fatigue
  • Designed for reduced vibration
  • Exhaust silencer provides quiet operation at 79 db
$159.00
View Item
Special for this item!
Special for this item!

Shipping Time Image


Bill Me Later from Paypal


Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Blog ImageFacebook ImageTwitter Image


Tools-Plus.com Customer Comments
MADE IN USA Products