You're currently browsing our
Lackmond Diamond Blades over 7-1/4"
section within our Lackmond Diamond Products departmentLackmond EDH121251 12" x .125 x 1" Wet/Dry Masonry Diamond Blade
- Designed for high-speed hand held saws, air saws and low horsepower walk behind saws
- For cutting cured concrete, wet or dry
- 0.395 diamond depth
$69.99
Lackmond EDH141251 14" x .125 x 1" Dry Cut Masonry Diamond Blades
- Designed to be used on high speed demo saws, air saws and low horsepower walk behind saws in cured concrete dry conditions
- Now .125 kerf, with more diamond
- Maximum safe speed: 4365 RPM
$72.00
Lackmond HA312110US 12" x .110 x 1" Wet/Dry Asphalt Diamond Blade
- Designed to be used on high speed demo saws, also for use with air saws and low horsepower walk behind saws
- For green concrete and asphalt in wet or dry conditions
- Recommended max operating speed: 3024 RPM
$97.00
Lackmond HA314110US 14" x .110" x 1" Asphalt Concrete Diamond Blade
- For use on green concrete and asphalt in dry conditions
- Designed to be used on high speed demo saws but can also be used in air saws and low horsepower walk behind saws
- Proper bonding, core protection, pre and post tensioning and state of the art laser welding maximize the speed of cut and longevity
$118.00
Lackmond HVS1121101 12" x .110 x 1" Wet/Dry Concrete Diamond Blade
- Designed to be used on high speed demo saws, air saws and low HP walk-behind saws in cured concrete wet or dry conditions
- Recommended max operating speed: 3024 RPM
- Blades deliver excellent speed of cut while maximizing longevity
$136.85
Lackmond HVS1141101 14" x .110 x 1" Wet/Dry Concrete Diamond Blade
- Designed to be used on high speed demo saws, air saws and low HP walk-behind saws in cured concrete wet or dry conditions
- Recommended max operating speed: 2592 RPM
- Blades deliver excellent speed of cut while maximizing longevity
$187.99
Lackmond SG14SPP1251 Dry Cutting SPP High Speed Diamond Contractor Blade
- General purpose segmented diamond blade for use on cure concrete and masonry applications
- 10mm segment height
- Intended for use on both high speed hand held and low horsepower walk-behind saws
$52.00
Lackmond SG9BGT 9" x .090" x 5/8" Small Segmented Diamond Blade
- For dry cutting general purpose cured concrete, masonry and various stone aggregates
- Combines the aggressive qualities of a traditional segmented blade with the smooth, clean cut of a turbo
- Specs: 9" x .090 x DM-5/8"
$58.97
Lackmond TL10S 10" x .060 x 5/8" Wet Tile Diamond Blade
- Wet tile blades are most often used in the marble, granite, tile and stone industries
- Blade is narrower in width than other blades and have a very fine, smooth rim
- Most common use is for cutting thin stock tiles and ceramics
$37.99
Lackmond TL10SP-P 10" Diamond Blade
- Used for porcelain, marble, granite, tile and stone industries
- Wet cut and can only be run wet on tile saws
- Sport a very fine, smooth rim
$72.33
Lackmond TL8S 8" x .060 x 5/8" Wet Diamond Tile Blade
- Wet tile blades are most often used in the marble, granite, tile and stone industries
- Blade is narrower in width than other blades and have a very fine, smooth rim
- Most common use is for cutting thin stock tiles and ceramics
$28.99
Lackmond WP51011058 10" x .110 x 5/8" Wet Concrete / Brick Paver Diamond Blade
- Designed for wet cutting masonry materials on upright stationary saws
- Fits most 10" wet tile saws
$107.00
View discontinued Lackmond Diamond Blades over 7-1/4"
Lackmond HA312110 12" x .110 x 1" Wet/Dry Asphalt Diamond Blade
- No longer available...
- Consider the HA312110US
Lackmond HA314110 14" Dry Cut Asphalt / Green Concrete Diamond Blade
- No longer available...
- Consider the HA314110US
Lackmond WP510110 10" Wet Concrete / Brick Paver Diamond Blade
- No longer available...
- Consider the WP51011058
Top Sellers in This Category
