.
.
.
DAYS
HOURS
MINUTES
SECONDS
 
You're currently browsing our

Belt/Disc Sanders

section within our Woodworking Machinery department

Few other machines can match the efficiency of a Belt/Disc sander. The combination of a belt sander and disc sander in one machine allows you to start and finish your woodworking project in one place. Belts range from narrow to wide and from long to short, and are usually used for the beginning sanding of rough materials. Discs come in a myriad of sizes and are ideal for creating a smooth, finished surface. Belt/disc sanders come in sizes ranging from small benchtop units that can be taken to the jobsite or stored in the shop, to large floor models capable of sanding, deburring, and smoothing for hours on end.

JET 708595 Model JSG-96 Benchtop Belt/Disc Sander
JET Tools Logo

JET 708595 Model JSG-96 Benchtop Belt/Disc Sander

  • Large cast iron table has preset stops at 90° and 45° to let you use the belt sander vertically, horizontally or anywhere in between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
$642.60
After Sale Savings
View Item
Special for this item!
JET 708596K Model JSG-96OS Belt/Disc Sander
JET Tools Logo

JET 708596K Model JSG-96OS Belt/Disc Sander

  • 3/4 HP, 115 Volts motor
  • 6" x 48" belt runs 2258 RPM
  • 9" disc spins at 1725 SFPM
$710.10
After Sale Savings
View Item
Special for this item!
JET 708597K Model JSG-96CS Belt/Disc Sander PLUS Closed Stand
JET Tools Logo

JET 708597K Model JSG-96CS Belt/Disc Sander PLUS Closed Stand

  • Large cast iron table has preset stops at 90° and 45° to let you use the belt sander vertically, horizontally or anywhere in between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
$778.49
After Sale Savings
View Item
Special for this item!
JET 708598K Model JSG-6CS Belt/Disc Sander PLUS Closed Stand
JET Tools Logo

JET 708598K Model JSG-6CS Belt/Disc Sander PLUS Closed Stand

  • Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
$1,318.50
After Sale Savings
View Item
Special for this item!
JET 708599 Model JSG-6DC Belt/Disc Sander
JET Tools Logo

JET 708599 Model JSG-6DC Belt/Disc Sander

  • Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
$1,098.90
After Sale Savings
View Item
Special for this item!
JET 708599K Model JSG-6DCK Belt/Disc Sander PLUS Open Stand
JET Tools Logo

JET 708599K Model JSG-6DCK Belt/Disc Sander PLUS Open Stand

  • Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
$1,007.99
After Sale Savings
View Item
Special for this item!
Powermatic 1791291K Belt/Disc Sander
Powermatic Tools Logo

Powermatic 1791291K Model 31A 1-1/2 HP Belt/Disc Sander

  • 1 PH, 115/230 V
  • Belt and disc tables are precision ground cast iron with miter slots
  • Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding
$1,341.90
After Sale Savings
View Item
Special for this item!
Powermatic 1791292K 6"x48" Belt/Disc Sander
Powermatic Tools Logo

Powermatic 1791292K Model 31A 2HP 3PH 115/230V 6"x48" Belt/Disc Sander

  • Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops
  • Belt and disc tables are precision ground cast iron with miter slots
  • Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding
$1,322.99
After Sale Savings
View Item
Special for this item!

Bill Me Later from Paypal


Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Blog ImageFacebook ImageTwitter Image


Tools-Plus.com Customer Comments
MADE IN USA Products