Air Coil Nailers
section within our Power Tools departmentCoil Nailers are ergonomically designed for Framing, Roofing and Siding projects using full round head nails or clipped head nails. By virtue of how coil nails are packaged and despensed in wire collated form, they allow hot dipped galvanized type fasteners to be used in the nailer as well. Tools PLus carries Coil Nailers manufacturered by Hitachi, Senco, Milwaukee and Max.
Coil Roofing Nailers install shingles or wall sheathing quickly and easily. The round magazine stores longer clips of nails than a straight magazine for improved efficiency. These guns can be fired repeatedly by holding the trigger and tapping the gun along the work surface.
Hitachi NV45AB2 7/8" To 1-3/4" Roofing Nailer, Coil, Wire Collation -Side Load
- Carbide tipped push lever, shingle guide
- Rubber safety valve cover
- Good for roofing and a variety of siding applications
Porter Cable RN175A 7/8" To 1-3/4" Roofing Coil Nailer
- Uses 15° wire collated roofing nails (the most common type)
- Nail feed mechanism w/ two feed pawls
- Selectable trigger w/ restrictive or contact actuation mode
Senco ROOFPRO 450 3/4" To 1-3/4" Pro Series Roofing Nailer
- Aluminum housing and cap
- Tool-free adjustable depth-of-drive
- Durable comfort grip
Senco ROOFPRO 455XP 3/4" To 1-3/4" Extreme Pro Roofing Coil Nailer
- Aluminum housing and cap
- Tool-free adjustable depth-of-drive
- Adjustable shingle guide
View discontinued Coil Roofing Nailers
Milwaukee 7120-21 3/4" - 1-3/4" Coil Roofing Nailer Kit
- No longer available...
Porter Cable RN175 7/8" To 1-3/4" Coil Roof Nailer
- No longer available...
- Consider the Senco ROOFPRO450
Hitachi NV65AH 1-1/2" - 2-1/2" Siding Nailer, Coil, Wire/Plastic Sheet Collation
- Accepts wire or plastic collated nails
- 360° exhaust deflector
- Depth of drive adjustment to countersink or flush drive nails
Max CN565S 1-1/4" To 2-1/2" Coil Siding Nailer
- Depth dial control
- Multi directional exhaust
- Balanced and lightweight at only 5.3lbs
Rather than swinging a hamnmer several times to drive and set a nail, a nail gun completes the whole task in one trigger squeeze. Position the gun's tip where you want the nail to be, press down the safety on the nailing tip, and squeeze the trigger to fire the nail. Framing nailers are ideal for assembling wall, floor, and roof framework. They're the largest nail guns for home carpentry and come in both Coil and Strip Nailers..
Hitachi NV75AG 1-3/4 To 3" Siding/Framing Nailer, Coil, Wire/Plastic Sheet Collation
- Drives both wire framing and plastic sheet siding collated coil fasteners
- Tool-less depth adjustment
- Plastic shield to deflect wire collation
Hitachi NV83A2 6D (2") To 12D (3-1/4") Full Round Head, Coil, Wire Collation
- Shoots wire collated nails just like Bostitch
- Contact trip trigger included,
- Built in toenail push lever
Max CN890II 1-3/4" To 3-1/2" Coil Construction / Framing Nailer
- Dial adjustable depth of drive
- Multi directional exhaust
- Balanced and lightweight at only 7.9lbs
Senco SCN49 Coil Siding Nailer
- Well balanced and lightweight at only 5 pounds
- Uses a selective trigger which quickly selects the mode of operation
- Dual collation allows the choice between wire or plastic collation
View discontinued Coil Framing Nailers
Milwaukee 7120-21 3/4" - 1-3/4" Coil Roofing Nailer Kit
- No longer available...
