Power Tool Accessories 
Drill Chucks, Keys, Holsters & Accessories Drill Chucks and Keys
Power Tools Power Tool Accessories Drill Chucks, Keys, Holsters & Accessories Drill Chucks and Keys
You're currently browsing our
Drill Chucks and Keys
section within our Power Tool Accessories departmentFestool 487542 Replacement Keyless Chuck
- Chuck is for the older style drills, it will NOT fit CentroTec FastFix tools
- 1/2"-20 UNF threads attach to the motor shaft
- 1-10mm capacity (.04" to .39")
$37.00
Festool 489373 Keyless Chuck with Starting Ring
- Standard keyless chuck with starting ring
- This does NOT work with the FastFix system
- Made for the CDD 9.6 and 12 units
$45.00
Festool 490293 1/4" Right Angle Keyless (Quick-Connect) Chuck
- Keyless chuck snaps off without tools
- FastFix angle allows right angle work from the axis
- Can be positioned in any angle relative to the drill body
$98.00
Festool 490294 Eccentric Keyless (Quick-Connect) Chuck
- Fastfix eccentric chuck offsets the bit to the side of the chuck
- Keyless chuck can be removed without tools
- Drill and drive fasteners straight, even against sidewalls
$98.00
Festool 490698 Replacement FastFix Keyless Chuck
- The FastFix® staight chuck allows you to quickly and easily change to any other FastFix chuck without tools
- It's keyless and snaps on and off in seconds, without tools
- Drill at right angles in 22-1/2 degree increments
$55.00
Festool 492135 Centrotec Chuck
- Lightweight, compact quick-release chuck provides two points of contact for bits and accessories
- Using Centrotec accessories, precision milled sleeve acts like bushing, prevents wobble
- For use with FastFix cordless drills
$27.50
Festool 493539 FastFix Depth Stop Chuck
- Integral clutch for maintaining a preset depth
- Quick-out ring enables screw removals with the flick of a wrist
- Fast and easy bit changes
$98.00
General 36-37 Precision Drill Guide w/ Chuck
- Slide lock for sanding and buffing applications
- Drills accurate right-angled or variable angled holes with built-in protractor scale
- Adjusts 45° in either direction of vertical drill position
$35.99
Makita 763078-1 1/2" Jacobs Drill Chuck
- 2-1/4" long
- 1-3/4" wide at the base
- Fits drills with 1/2" x 20 threads
$24.00
Makita 763198-1 3/8" Capacity Keyless Chuck Conversion Kit
- Convert an impact driver's 1/4" hex drive to a 3/8" keyless 3-jaw chuck
- Accepts round shanked bits
- All metal housing for greater durability
$29.00
Makita 763414-1 3/8" Chuck Key
- Fits some other MAKITA 3/8" drills
- We also carry chuck key leash's
- Fits models: 6000LR, 6000R, HP1030, 6510LVR, DA3000R
$5.55
Makita 763419-1 1/4" & 3/8" Chuck Key
- Fits in the handle of many MAKITA drills
- We also carry chuck key leashes
- Fits models 6002D, 6010D, 6012HD, 6071D,6073D, 6040DW, 6010SDW, 6092D, 6093D, 6072D and 6070DW
$3.99
Milwaukee 48-32-2100 Offset Right Angle Attachment
- Fits all cordless drills & drivers
- Uses any 1/4" hex shaft bits
- Ideal for tight places
$19.95
Milwaukee 48-66-3080 3/8" x 1/4" Replacement Chuck Key
- For 3/8" chuck with 1/4" pilot
- Used On Chucks: 48-66-0240, 48-66-0805, 48-66-0806
- Made in the U.S.A
$4.89
Milwaukee 48-66-3120 5/8" x 5/16" Replacement Chuck Key
- For 5/8" chucks with 5/16" pilot
- Fits model # 1754-1
- K3 Jacobs. Also fits Jacobs # 3KD, 3A, 3B, 3PD, 6A-33
$5.99
Milwaukee 48-66-3160 3/4" x 3/8" Replacement Chuck Key
- For 3/4" chucks with 3/8" pilot
- Fits units # 1854-1, 4262-1
- K4 Jacobs # 36, 36B, 37PD, 36KD, 37
$7.49
Milwaukee 48-66-3200 1/4" x 7/32" Replacement Chuck Key
- For 1/4" chucks with 7/32" pilot
- This chuck key tightens the jaws of the 1/4 inch capacity chuck 48-66-0070, 48-66-0104 and 48-66-0230
- Made in the U.S.A
$3.89
Milwaukee 48-66-3240 3/8" x 15/64" Replacement Chuck Key
- For 3/8" chucks with 15/64" pilots
- K30 Jacobs # 31BA, 30, 30B, 31B, MC4
- Made in the U.S.A
$4.39
Milwaukee 48-66-3280 3/8" x 1/2" Replacement Chuck Key
- For 3/8" & 1/2" chucks with 1/4" pilot
- K32 Jacobs # 32BA, 33BA, 32, 32B, 33, 33B
- 3326, 33KD, MC10, MC33, 32BB, 381, 11N, MC1D,
$4.69
Milwaukee 48-66-3350 3/8" x 1/4" Replacement Chuck Key
- For 3/8" chucks with 1/4" pilot
- KG Jacobs, # SM4G61, MC1G41, MC1G60
- MC2, U2K41, all models of "G"
$2.99
Milwaukee 48-66-4020 Chuck Key Holder
- Fits Milwaukee keys # 48-66-3120, 48-66-3160
- Made in the U.S.A
$2.79
Milwaukee 48-66-4040 Chuck Key Holder
- Fits Milwaukee keys # 48-66-3080, 48-66-3240, 48-66-3280
- Made in the U.S.A
$2.96
Milwaukee 48-66-4080 Chuck Key Holder
- Fits 48-66-3200 chuck keys
- And all others with small shafts
- Fits all cordless chuck keys
$3.99
Milwaukee 49-22-8510 Right Angle Attachment Kit
- Compact design allows work in tight areas
- Durable all metal housing and steel gears
- Rated up to 235 in-lbs of torque
$39.97
Vermont American 17171 Angle Drive Kit
- For 90° drilling, buffing and sanding
- Smooth 1/4" Adapter to chuck onto drill (requires the purchase of another chuck w/ 3/8x24 thread)
- Steel gears
$19.99
View discontinued Drill Chucks and Keys
Top Sellers in This Category
$3.99 | $3.89 | $4.69 | $4.39 | |||
$3.99 | $5.55 | $2.96 | $2.79 |
