Rabbeting Bits
section within our Power Tool Accessories departmentMULTI-RABBETING BITS w/ MULTIPLE BALL BEARINGS
| Diameter | Shank Diameter | Cutting Length | Rabbet Depth | Overall Length | ||
49340 Rabbet Bit | 1-3/8" | 1/4" | 1/2" | 5/16", 3/8", 7/16", 1/2" | 2" | $32.62 |
RABBETING BITS
Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards and for letting in back panels. Steel pilots can be removed form bits and used with edge guides for wider rabbets. All bits cut 3/8" rabbet.
| Cutter Diameter | Carbide Height | Overall Length | Bearing Diameter | Rabbet Depth | # of Flutes | Shank Diameter | ||
32-096 Rabbeting Bit | 1-1/4" | 3/8" | 2" | 1/2" | 3/8" | 2 | 1/4" | $22.99 |
32-098 Rabbeting Bit | 1-1/4" | 5/8" | 2-1/4" | 1/2" | 3/8" | 2 | 1/4" | $24.00 |
32-100 Rabbeting Bit | 1-1/4" | 1/2" | 2" | 1/2" | 3/8" | 2 | 1/4" | $28.49 |
32-102 Rabbeting Bit | 1-1/4" | 1/2" | 2-1/4" | 1/2" | 3/8" | 2 | 1/2" | $28.49 |
MULTI-RABBETING BITS w/ MANY BALL BEARINGS
Comes with interchangeable bearings to cut rabbets of different depths. Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards or for letting in back panels. Depth of rabbet can be altered by changing bearing. Wrench included.
| Cutter Diameter | Carbide Height | Overall Length | Rabbet Depth | # of Flutes | Shank Diameter | ||
32-502 Rabbeting Bit And Bearing Set | 1-3/8" | 1/2" | 2-1/4" | 5/16", 3/8", 7/16", 1/2" | 2 | 1/4" | $27.00 |
32-504 Rabbeting Bits With Bearing Set | 1-3/8" | 1/2" | 2-1/4" | Flush, 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" | 2 | 1/4" | $52.99 |
32-522 Rabbeting Bit And Bearing Set | 1-3/8" | 1/2" | 2-1/4" | 5/16", 3/8", 7/16", 1/2" | 2 | 1/2" | $37.99 |
32-524 Rabbeting Bits with Bearing Set | 1-3/8" | 1/2" | 2-1/4" | Flush, 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" | 2 | 1/2" | $52.99 |
Add to cart! | Add to cart! |











