Power Tool Accessories 
Router Accessories Router Template Guides and Replacement Collets
Power Tools Power Tool Accessories Router Accessories Router Template Guides and Replacement Collets
You're currently browsing our
Router Template Guides and Replacement Collets
section within our Power Tool Accessories departmentDeWalt D26671 Laminate Trimmer Standard Base
- Precision machined, cast-aluminum for increased accuracy
- For basic edge and laminate trimming
- Micro-set thumb wheel for simple and accurate bit height adjustment
$27.00
DeWalt D26672 Laminate Trimmer Tilt Base
- Precision machined, cast-aluminum for increased accuracy
- Adjusts backwards 30° and forward 45° for angled cuts
- Fits the Porter Cable 7310 and DeWalt D26670
$27.00
DeWalt D26673 Laminate Trimmer Offset Base
- Precision machined tilt base, cast-aluminum for increased accuracy
- For trimming backsplashes or scribing in tight spaces
- Belt driven
$29.00
Festool 469625 OF 1010 Guide Bushing Adaptor
- Original replacement part for the OF 1010 Router
- Adaptor allows use of industry standard 2 piece threaded guide bushing assemblies
- Provides enhanced base durability and bit visibility
$24.00
Festool 469627 OF 2000 Guide Bushing Adaptor
- Adaptor allows for the use of standard "Porter Cable" style screw on bushings
- Adaptor will only fit the Festool OF 2000 model routers
- Adaptor provides enhanced base durability and bit visibility
$21.00
Festool 483358 Fine Adjustment
- Fine adjuster for fast and accurate adjustment of side stop
- Above picture shows the SA-OF-1010 side stop, it is NOT included
$23.50
Festool 483922 Trammel Unit for OF 1010 EQ
- For routing circles and decorative curves up to 28-7/8" in diameter
- Only works on the OF 1010 EQ models
- Create circles, radii, decorative curves and more
$20.50
Festool 484176 13.8 mm Copy Ring
- Used in conjunction with the DS 32 template and the VS 600 jointing system
- Will fit the OF 1010 Router
- It is required for certain operations, so it is useful to purchase
$11.50
Festool 484453 Dust Extraction Hood
- Used with the OF 1010 router and VS 600 system
- Used for jointing and edge trimming work
$17.00
Festool 485827 Limit Stop
- Provides front and rear stop position
- Use with Festool guide rails and the OF 1400 EQ Router
- 1 per package
$25.50
Festool 486030 17 mm Copy Ring
- Used in conjunction with the DS 32 template and the VS 600 jointing system
- Will fit the OF 1010 Router
- It is required for certain operations, so it is useful to purchase
$10.50
Festool 486031 24 mm Copy Ring
- Used in conjunction with the DS 32 template and the VS 600 jointing system
- Will fit the OF 1010 Router
- It is required for certain operations, so it is useful to purchase
$10.50
Festool 486032 27mm Copy Ring
- Used in conjunction with the DS 32 template and the VS 600 jointing system
- Will fit the OF 1010 Router
- It is required for certain operations, so it is useful to purchase
$10.50
Festool 486034 40mm Copy Ring
- Used in conjunction with the DS 32 template and the VS 600 jointing system
- Will fit the OF 1010 Router
- It is required for certain operations, so it is useful to purchase
$10.50
Festool 486052 Angle Arm
- Used in conjunction with model 486058 edging plate to copy workpieces
- Also used with a edging plate for timming flush edges
- Copy workpieces with ease and accuracy
$35.50
Festool 486058 Edging Plate
- Used in conjunction with model 486052 angle arm to copy workpieces
- Required along with model 486052 for flush trimming edges
$52.50
Festool 486534 Copier Scanning Set
- Used to copy workpieces
- The angle arm part is additionaly required to copy workpieces
- Compatible with the OF 1100 EQ Routers
$55.50
Festool 487010 Guide Stop for OF 2000
- Guide stop is for attaching the router to the guide rail
- Provides an integral fine adjustment system for more operator control
- Includes a support that offsets the guide rail height
$55.50
Festool 487016 30mm Copy Ring
- Copy ring or guide bushing for Festool OF2000 router
- Type KR-D30
- Diameter is 1.181" (30mm)
$13.00
Festool 487017 40mm Copy Ring
- Copy ring or guide bushing for Festool OF2000 router
- Type KR-D40
- Diameter is 1.575" (40mm)
$13.00
Festool 487018 27mm Copy Ring
- Copy ring or guide bushing for Festool OF2000 router
- Type KR-D27
- Diameter is 1.062" (27mm)
$13.00
Festool 487019 24mm Copy Ring
- Copy ring or guide bushing for Festool OF2000 router
- Type KR-D24
- Diameter is .944" (24mm)
$13.00
Festool 487441 Copying Ring Set
- Full set of copying rings for Festool routers
- Comes in diameters of 24mm, 27mm, 30mm and 40mm
- Type KRH-OF SET
$66.00
Festool 487839 Edge Guide for OF 2000
- Edge guide works as a parallel for guiding the Festool OF 2000E router along working edge of material
- Fits the OF 2000 Routers only
$144.50
Festool 488752 Guide Stop
- Guide stop fits the OF 1010 routers
- Allows use of router on the FS guide system
- Comes complete with support
$29.50
Festool 488754 Fine Adjuster
- Make quick and precise adjustments
- Used with the OF 1010 router and guide stop or edging plate
- 1 per pack
$20.50
Festool 488755 8mm Clamping Collet with Nut
- Clamping collet is used with 8mm shank router bits
- For use with the OF 1010 router
- 1 per package
$31.50
Festool 488756 Extension Table
- Table used to enlarge support area when trimming edges
- Small center bore eases edge and corner routing
- Outrigger handle for additional support
$35.50
Festool 488760 6mm Clamping Collet with Nut
- Clamping collet is used with 6mm shank router bits
- For use with the OF 1010 router
- 1 per package
$31.50
Festool 488761 1/4" Clamping Collet with Nut
- Clamping collet is used with 1/4" shank router bits
- For use with the OF 1010 router
- 1 per package
$31.50
Festool 489229 Hard Fiber Base
- Replacement base for OF 1010 EQ routers
- This does not have a centering bore
- Type TP-OF 1010
$15.00
Festool 489427 Edge Guide for OF 1010 EQ
- Allows the router to run parallel to an edge for easier edging
- Uses a chipguard, that is sold seperately, to remove debris from the workpiece
- Designed for use in the OF 1010 EQ routers
$34.50
Festool 490770 17mm Copy Ring with Flange
- Copy ring for use with Router, OF 1010, in conjunction with the Festool VS 600 Jointing System
- Outer Diameter: 17mm (.669")
- Inner Diameter: 15mm (.590")
$13.00
Festool 490771 24mm Copy Ring
- Copy ring for use with Router, OF 1010, in conjunction with the Festool VS 600 Jointing System
- Outer Diameter: 24mm (.944")
- Inner Diameter: 22mm (.866")
$13.00
Festool 490772 8.5mm Copy Ring
- Copy ring for use with Router, OF 1010, in conjunction with the Festool VS 600 Jointing System
- Outer Diameter: 8.5mm (.335")
- Inner Diameter: 6.5mm (.255")
$13.00
Festool 491427 MFK 700 0 Degree Horizontal Base Unit
- Designed for straight routing in the horizontal configuration
- For use with the Festool MFK 700 Router
- Accurate horizontal cuts with ease
$150.00
Festool 491621 42" Router Hole Drilling Guide Rail
- Intelligent technology for precise working
- Hard anodized surface
- Non-slip coating
$81.50
Festool 491622 95" Router Hole Drilling Guide Rail
- Festool rail with indexing holes every 32 mm
- For use with Festool Hole Drilling set # 583290 or Hole Drilling Set Complete # 583291
- Hard-anodized surface
$264.00
Festool 492000 Replacement OF 1400 Dust Extraction Cover
- Replacement dust extraction hood for the Festool OF 1400
- Keep your tool running at top condition
- Helps optimize dust extraction
$17.00
Festool 492005 8mm Collet with Nut
- Clamping collet with nut helps to prevent excessive vibration while routing
- This will fit the OF 1400 EQ and OF 2000 E routers
- 8mm shank diameter
$42.00
Festool 492143 1/2" Replacement Collet with Nut
- Clamping collet with nut helps to prevent excessive vibration while routing
- This will fit the OF 1400 EQ and OF 2000 E routers
- 1/2" diameter shank
$42.00
Festool 492179 8.5mm Copy Ring with Flange
- Copy ring is used with the OF 1400 EQ Router in conjunction with the VS600 Joining system
- Diameter: 8.5mm (.335")
- Type KR-D OF1400/VS600
$18.00
Festool 492180 13.8mm Copy Ring with Flange
- Copy ring is used with the OF 1400 EQ Router in conjunction with the VS600 Joining system
- Diameter: 13.8mm (.543")
- Type KR-D OF1400/VS600
$18.00
Festool 492181 17mm Copy Ring with Flange
- Copy ring is used with the OF 1400 EQ Router in conjunction with the VS600 Joining system
- Diameter: 17mm (.669")
- Type KR-D OF1400/VS600
$18.00
Festool 492182 24mm Copy Ring with Flange
- Copy ring is used with the OF 1400 EQ Router in conjunction with the VS600 Joining system
- Diameter: 24mm (.944")
- Type KR-D OF1400/VS600
$18.00
Festool 492183 24mm Copy Ring
- Copying ring is used with the OF 1400 router
- Diameter: 24mm (.944")
- Type KR-D/OF1400
$18.00
Festool 492184 27mm Copy Ring
- Copying ring is used with the OF 1400 router
- Diameter: 27mm (1.062")
- Type KR-D/OF1400
$18.00
Festool 492185 30mm Copy Ring
- Copying ring is used with the OF 1400 router
- Diameter: 30mm (1.181")
- Type KR-D/OF1400
$18.00
Festool 492186 40mm Copy Ring
- Copying ring is used with the OF 1400 router
- Diameter: 40mm (1.575")
- Type KR-D/OF1400
$18.00
Festool 492187 Centering Mandrel
- Mandrel works with 1/4" and 8mm collets
- Fits OF 1010 EQ and OF 2000 E routers
- Type ZD-OF 6.35/8
$25.00
Festool 492574 Hard Fiber Router Base Runner
- Reduced centering bore size, LA-OF 1400
- Hard fiber base runner
- Fit over existing base plate
$29.50
Festool 492585 Dust Extraction Hood
- Used with teh OF 1400 EQ router and VS 600 system
- Auxiliary dust extraction hood aids in providing a cleaner workspace
- Good for edge trimming
$37.00
Festool 492610 MFS400 Router Template System
- System is for rectangular or round cut-outs with all Festool routers
- Its anodized aluminum profile with integral rule adjusts easily and is accurate to 1/32"
- Rout circles, make precise inside or outside cuts, and combine sets for unlimited size
$263.00
Festool 492611 MFS700 Router Template System
- System is for rectangular or round cut-outs with all Festool routers
- Its anodized aluminum profile with integral rule adjusts easily and is accurate to 1/32"
- Rout circles, make precise inside or outside cuts, and combine sets for unlimited size
$399.00
Festool 492722 2 Pack 200mm MFS200 Extension Profile
- These longitudinal extension profiles are for use with the Festool MFS 400 and MFS 700 router templates
- Each set includes 2 profiles and longitudinal connections
- Type MFS-VP 200
$117.00
Festool 492723 2 Pack 400mm MFS400 Extension Profile
- These longitudinal extension profiles are for use with the Festool MFS 400 and MFS 700 router templates
- Each set includes 2 profiles and longitudinal connections
- Type MFS-VP 400
$139.00
Festool 492724 2 Pack 700mm MFS700 Extension Profile
- These longitudinal extension profiles are for use with the Festool MFS 400 and MFS 700 router templates
- Each set includes 2 profiles and longitudinal connections
- Type MFS-VP 200
$194.50
Festool 492725 2 Pack 1000mm MFS1000 Extension Profile
- These longitudinal extension profiles are for use with the Festool MFS 400 and MFS 700 router templates
- Each set includes 2 profiles and longitudinal connections
- Type MFS-VP 1000
$265.00
Festool 492726 2 Pack 2000mm MFS2000 Extension Profile
- These longitudinal extension profiles are for use with the Festool MFS 400 and MFS 700 router templates
- Each set includes 2 profiles and longitudinal connections
- Type MFS-VP 2000
$350.00
Festool 493046 Table Widener
- Table widener gives more surface area for edge routing
- Comes with black chip catcher
- Table is oversized and heavy duty
$115.00
Festool 493139 Table Widener
- Table widener gives more surface area for edge routing
- Includes black chip catcher as shown
- Oversized base plate is heavy duty
$102.00
Festool 493180 OF 1010 Chip Catcher
- Used to improve dust extraction
- Attaches underneath the router base
- Made for use with the OF 1010 router
$16.00
Festool 493233 Table Widener
- For the Festool OF 1400 EQ
- Oversized, heavy-duty base plate with integral dust hood
- Gives more surface area for edge routing
$120.00
Festool 493259 OF 2000 Chip Catcher
- Catcher improves dust extraction ability
- Attaches to router underneath base
- This is the replacement catcher for table widener, which is sold seperately
$21.50
Festool 493566 Guide Bushing Adapter for OF 1400
- This is a replacement guide bushing adapter for the OF 1400 router
- Adapter allows use of industry standard 2 piece threaded guide bushing assemblies
- Also provides enhanced base durability and bit visibility
$22.50
Festool 494340 LR 32 Guide Plate
- Guide plate with centering mandrel
- Use with the LR 32 Hole Drilling System
- Requires the LR 32 Guide Rail
$104.00
Festool 494460 OF 2200 8mm Clamping Collet
- 8mm clamping collet for use with the Festool OF 2200 Plunge Router
- Precision machined and high durability
- Please note that the OF 2200 comes standard with a 1/2' clamping collet
$44.00
Festool 494463 OF 2200 1/4" Clamping Collet
- 1/4" clamping collet for use with the Festool OF 2200 Plunge Router
- Precision machined and high durability
- Please note that the OF 2200 comes standard with a 1/2' clamping collet
$44.00
Festool 494465 OF 2200 1/2" Clamping Collet
- 1/2" clamping collet for use with the Festool OF 2200 Plunge Router
- Precision machined and high durability
- Please note that the OF 2200 comes standard with a 1/2" clamping collet
$44.00
Festool 494622 17mm OF 2200 Template Guide
- 17mm Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 494623 24mm OF 2200 Template Guide
- 24mm Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 494624 27mm OF 2200 Template Guide
- 27mm Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 494625 30mm OF 2200 Template Guide
- 30mm Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 494626 40mm OF 2200 Template Guide
- 40mm Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 494627 OF 2200 Copy Ring Adapter
- Accepts industry standard two-piece threaded guide bushings
- For use only with the Festool 574277 OF 2200 Plunge Router
$24.00
Festool 494670 OF 2200 Chip Catcher
- Replacement chip catcher
- Fits the Festool 574277 OF 2200 Plunge Router
$24.50
Festool 494675 OF 2200 Template Base Guide
- Accessory base with dust chanels for use with the template guides
- For use only with the Festool 574277 OF 2200 Plunge Router
$47.50
Festool 494677 OF 2200 Small Bore Base
- For use with the Festool OF 2200 Plunge Router
- Provides additional support surface
- prevents tipping when using smaller diameter router bits
$47.50
Festool 494682 OF 2200 Support Base
- For use with the Festool OF 2200 Plunge Router
- Offers additional support surface to prevent tipping when edge routing
- The large diameter opening is ample for even the largest of router bits
$55.00
Festool 495165 MFK 700 1.5 degree Horizontal Base Unit
- For use with the Festool MFK 700 Router
- Replacement base featuring a slight 1.5 deg. inclination
- Helps prevent damage to the workpiece surface
$150.00
Festool 495248 OF 2200 Metric Router Accessory Kit
- Essential accessories for your Festool OF 1400 Router
- Supplied in a Festool Systainer #3 for storage and organization
- Metric sizes
$310.00
Festool 495249 OF 2200 Imperial Router Accessory Kit
- Essential accessories for your Festool OF 1400 Router
- Supplied in a Festool Systainer #3 for storage and organization
- Imperial sizes
$310.00
Festool 495339 1/2" OF 2200 Template Guide
- 1/2" Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 495340 3/4" OF 2200 Template Guide
- 3/4" Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 495341 1" OF 2200 Template Guide
- 1" Template Guide
- For use only with the Festool 574277 OF 2200 Plunge Router
$19.00
Festool 495342 1-3/8" OF 2200 Template Guide
- 1-3/8" Template Guide
- For use with the Festool OF 2200 Plunge Router
$19.00
Lewin 26100 Router Compass
- Cuts 8" to 48" dia.
- Attaches to most router bases with ease
- Cut perfect circles and arc's
$29.99
Makita 763803-0 1/4" Collet Sleeve
- Use with any router to reduce from 1/2'' to 1/4''
- This is only a sleeve and needs the original 1/2'' collet to go into
$7.35
Milwaukee 48-66-1020 1/2'' Router Collet and Locking Nut
- For use on Milwaukee Routers 5615-20, 5615-21, 5619-20, 5625-20
- Extra Long eight-segmented design ensures maximum bit to collet surface contact
- Extra wide faces for a firm, reliable nut-to-wrench connection
$22.00
Porter Cable 42000 Templet Guide Kit
- Contains template numbers: 42024, 21/32"ID - 3/4"OD, 42042, 5/8"ID - 51/64"OD, 42027, 11/32"ID - 7/16"OD, 42045, 17/32"ID - 5/8"OD, 42033, 13/32"ID - 1/2"OD, 42054, 1/4"ID - 5/16" OD, 42036, 9/32"ID - 3/8"OD, 2 #42237 Lock nuts and a carrying case
- Fits a variety of routers
- Made of precision machined steel
$25.99
Porter Cable 42042 51/64" O.D. x 5/8" I.D. Template Guide
- For hinge butt routing
- Fits Porter Cable routers
$6.85
Porter Cable 42045 5/8" O.D. x 17/32" I.D. Template Guide
- For use with Stanley T-3 template
- Fits Porter Cable routers and other common routers
- Made from Precision machined Steel for both incredible accurancy and durability
$6.99
Porter Cable 42048 1-34/64" Router Template Guide
- Fits Porter-Cable Routers and many other standard routers
- Made from precision-machined steel for better accuracy and durability
- For hinges with 5/8" Corner Radius
$10.99
$5.95
Porter Cable 42186 Standard Style Router Sub Base
- Standard replacement for Porter Cable routers with 5-3/4" sub bases
- Has the standard 1-1/8" center hole and accepts template guides
- Fits: 100, 690, 691, 693, 9690, and 693PK
$8.49
Porter Cable 42187 Clear Router Sub Base w/ 2-1/2" Hole
- Use with routers #'s 514, 518, 520, 7518, 7519, 7536, 7537, 7538, & 7539
$18.91
Porter Cable 42188 Clear Router Sub Base w/ 2-1/2" Hole
- Fits all other P-C models that don't use 42187
$14.37
Porter Cable 42999 1/4" Shank Collet Assembly
- Fits model numbers: 690, 691, 693, 7518, 7519, 7529, 7538 and 7539
- Converts 1/2" to 1/4"
- Auto-release design
$9.99
Vermont American 23455 Letter Template Set
- For engraving wood signs and nameplates
- Includes two sets of letter and number template sizes
- Use with 1/4"-1/2" straight, V-groove or core box router bits for different letter styles
$26.99
View discontinued Router Template Guides and Replacement Collets
Top Sellers in This Category
$29.99 | $5.95 | $27.00 | $11.75 | |||
$6.85 | $29.00 | $18.91 | $3.75 |
