This product requires special handling and ships via Truck Freight. During checkout, please select Truck Freight: To Be Quoted, and email shipping@tools-plus.com for a freight cost estimate. Please see our Shipping Information Page for further details.

Free Guide System with Purchase of a Powermatic Planer!

Offer valid while supplies last. Free Guide System will be shipped direct with your order

The 1120003 includes:

• Powermatic 1120003 Planer / Molder

Features:

• 5 HP motor with 15" planing capacity handles the biggest jobs
• Fully enclosed cabinet with integral cabinet for complete shop mobility; 8' cord
• Feed rollers and cutterhead supported by full cast-iron head assembly
• Uses single or 3 piece molding knives
• 27-1/2" x 15-1/8" cast iron table for material support
• Dust collection

Tech Specs:

• Working Width (in.): 15
• Maximum Depth of Cut - Planing (in.): 1/8
• Maximum Depth of Cut - Molding (in.): 3/4
• Maximum Planing Thickness (in.): 6-1/2
• Minimum Planing Length (in.): 8
• Cutterhead Diameter (in.): 2-7/8
• Cutterhead Speed (RPM Revolutions Per Minute): 4500
• Cuts Per Minute: 13500 planing
• Outfeed Roller Diameter (in): 1-1/2
• Infeed Roller Diameter (in): 1-1/2
• "Feed Rate, Planing (FPM)": 10 and 20
• "Feed Rate, Molding (FPM)": 10 and 20
• Table Size (in.): 27-1/2 x 15-1/8
• Scale/Cursor: inches & millimeters
• Number of Knives: 3
• Table Height Adjustment (in.): 1 Turn = 1/16"
• Dust Port Diameter (OD/in.): 4
• Dust Collection Minimum CFM Cubic Feet (of air) Per Minute - Either how much air is produced by a compressor or consumed by a tool Required: 900
• Motor HP: 5HP
• Motor Phase: 1Ph
• Motor Voltage: 230V