This item ships via Common Carrier, we will ship to a commercial location with a loading dock or a freight terminal near you for our standard $6.50. Just select Standard $6.50 Ground at checkout. Additional options, like a residential delivery or lift gate service will be additional charges. Please see our Shipping Information Page for further details.

The 1280102C includes:

• Powermatic 1280102C PM2700 Shaper
• 3/4" and 1-1/4" interchangeable spindle collets
• Spindle height digital readout
• Featherboard hold downs
• Deluxe miter gauge
• Integrated caster system

Features:

• Offers more features to you than any other shaper in the same class
• Extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support
• Built-in, omni-directional caster system (patent pending) is retractable into the base
• Quick-release lever allows fast speed and belt changes
• Extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit
• The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need
• Digital readout for the spindle height allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors

Tech Specs:

• Part Number: 1280100C
• Model Number: PM2700
• Digital Readouts: spindle height
• Dust Collection Minimum CFM Cubic Feet (of air) Per Minute - Either how much air is produced by a compressor or consumed by a tool Required: 600
• Dust Port Diameter (OD/in.): 4 (dual ports)
• Electrical Controls - Magnetic Starter: magnetic
• Fence
  • Size (L x H/in.): 18-3/4 x 4-7/8
  • Height: 45 inch
  • Length: 40 inch
• Motor
  • Amps Amperes - A comparable measure of electricity consumption or output. (Amps x Volts = Watts): 14
  • HP Horsepower - A comparable way of measuring the amount of power output of a motor or engine (1 horsepower = about 746 watts): 5HP
  • Phase: 3PH
  • Voltage: 230V (can be rewired to 460V, requires 460V magnetic switch)
• Reversable: Yes
• Router Bit Collet Diameter (in.): 1/4 and 1/2 (optional)
• Spindle
  • Diameter (in.): 3/4, 1-1/4
  • Size Under Nut (in.): 3/4 spnd = 3-3/4, 1-1/4 spnd = 6
  • Speed (RPM Revolutions Per Minute): 7,500 & 10,000
  • Travel (in.): 4
• Table
  • Height From Floor (in.): 35-1/2
  • Insert Opening Diameter (in.): 2-3/4 & 3-7/8
  • Inserts: 2-3/4" ID and 3-7/8" ID
  • Opening Diameter (in.): 7-3/8
  • Size (in.): 40 x 30
  • T-Slot (in.): standard
• Net Weight: 664 pounds
• Ship Weight: 690 pounds
• Overall Dimensions: 40x37x45