Powermatic 1791267 201HH 22" Planer 7-1/2 HP, 1PH, 230 V + Helical Cutter
The 1791267 includes:
- Powermatic Planer
- Dust collection port
- Adjustable foot pads
- Tool kit
- This 22" , single phase beauty has a Helical cutterhead for quiet and smooth cutting
- No viabration because of solid cast iron construction
- Rough or fine finish work is not a problem due to 2 feed speeds
- Segmented infeed roller with sectional chipbreaker allows multiple board planing
- Roller bearing-mounted feed rollers for long life
- Smooth feeding of rough workpieces due to adjustable bed rollers
For Pre-Sales questions on Powermatic Tools and Machinery, feel free to contact Customer Service at (888) 804-7129, or for technical issues call (800) 274-6846). For all warranty issues, please call (800) 274-6848.....and don't forget to tell them Lucy sent you!
Working with your Powermatic 201HH 22" Planer
Never put your hands in jeopardy. Some workpieces simply cannot be fed safely thru your planer without the use of hold-down push blocks or special holding jigs. Feeding wood into your planer also requires attention to hand positions. Make sure you avoid letting them approach too close to the automatic feed rollers. Pay very careful attention to your owners manual which you can find on-line on the manufacturers website. Never attempt to plane a workpeice smaller than minimum recommended. It might sound strange for us to mention this, but work only with wood. This Powermatic Planer is designed only for woodworking; do not attempt to work with metals or plastics of any type. Also, keep your tool in good condition. Cutting knives must be sharp and all tool adjustments must be carefully made and maintained. Just simple good common sense advise for your Powermatic Model 201HH Planer.
- Part Number: 1791267
- Maximum Planing Width: 22"
- Maximum Depth of Cut: 3/16"
- Maximum Planing Thickness: 9-1/4"
- Minimum Planing Length: 10"
- Cutterhead Diameter: 3-1/4"
- Cutterhead Speed: 4800 RPM
- Outfeed Roller Diameter: 3"
- Feed Rate: 20 and 30 FPM
- Table Size: 32-1/4" x 24"
- Number of Knives: 150 four-sided inserts
- Dust Port Diameter: 5 OD/in
- Dust Collection Minimum CFM Required: 900
- Motor: 7-1/2 HP, 1 Phase, 230 Volt
- Model Number: 201HH
- Brand: Powermatic
- Dimensions: 42" x 49" x 59"
- Weight: 1350 pounds
UPC - 662755955853
This item is covered by WMH's 1 Year Warranty.
WMH Stands behind every product it sells with outstanding customer service and support. Their multitude of service repair centers offer quick turnarounds and most of the time they can authorize warranty repair, assist you in locating replacement parts, and perform routine maintenance and large repairs on your tools and machinery. To find a service center near you, please call 1-800-274-6848.
Overall Rating for Powermatic 1791267 201HH 22" Planer 7-1/2 HP, 1PH, 230 V + Helical Cutter
Initial review of 201 HH planer
By ERSEELEY from West valley NY on January 2, 2014
Pros:Power, finish, hood opens easily to get to cutter head, feed rollers, holddown bar etc. Table is very smooth and lever for adjustable bottom rollers works well. Machine well adjusted right out of the crate.
Cons:7.5 hp single phase motor draws large current load.
Thickness scale is hard to read, must be careful when adjusting since their are no call outs for quarter or half inch increments - its all eights.