Powermatic 1791321 Model DDS-237 10 HP 3 PH 37" Dual Drum Sander
The 1791321 includes:
- Powermatic Model DDS-237 Dual Drum Sander
- Two speed gearbox
- Dual 4" dust ports
- Sandpaper installed on drums
- Tool kit
- 10 HP motor for plenty of power
- Independently adjustable rear drum for fine tuning
- Hard durometer rubber coating on steel drums provides flat, smooth finish
- Two-speed gearbox for wide range of sanding projects
- Full size cast iron table for solid support
- Forward/reverse poly conveyor belt grips stock evenly
- Dual dust ports with directional baffles for more efficient dust removal
- 230/460V, pre-wired for 230 Volts
The DDS-237 is a production class Dual Drum Sander that is loaded with features. A 10 HP motor drives the dual steel drums, which have a hard durometer rubber coating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath.
For Pre-Sales questions on Powermatic Tools and Machinery, feel free to contact Customer Service at (888) 804-7129, or for technical issues call (800) 274-6846). For all warranty issues, please call (800) 274-6848.....and don't forget to tell them Lucy sent you!Please take note of (if applicable) the voltage and phase of the machine you are ordering. If necessary, check with your electrician.
Features for this DDS-237 Dual Drum Sander
This Dual Drum Sander is loaded with features and available in configurations to suite your needs. All Powermatic Dual Drum Sanders are protected with a full magnetic on-off switch. The Drum Sanders are enclosed in an all-steel cabinet. Compartments with latching doors at the bottom enclose the motor, drive systems and provided spacious storage. The full-width hinged steel top opens to make working with the drums and roller system easy. The Powermatic DDS-237 features dual steel drums spinning at a consistent 1700-RPM that are precisely machined and then given a hard durometer rubber coating that ensures a flat, non-marring surface.
The rear drum is independently adjustable, which allows fine-tuning, especially when it is equipped with a different grit paper than is on the front drum. A special graduated knob at either end of the rear drum makes setting this height for the abrasive grit being used both easy and accurate.
The pressure rollers are also fully adjustable. The easy to use adjusters are located on top at either end of the rollers for easy access. These adjusters are designed to be rugged and to hold their adjustment during long periods of use.
A heavy cast iron table has been [precisely machined to insure flatness. The table is raised and lowered on four jackscrews turned simultaneously by a slip-free chain drive. The chain drive also keeps the table level at all heights. The chain drive has an automatic tensioning system built in to reduced setup and adjustment.
The 1/4 HP feed motor drives the conveyor belt and is controlled by a two-speed forward/reverse gearbox that produces feed rates of 8 and 12 SFPM (surface feet per minute). The Powermatic DDS-237 was designed with the industrial environment in mind. It is tough, easy to use and easy to maintain.
- Maximum Board Width: 37"
- Minimum Board Length: 9"
- Maximum Board Thickness: 51/4"
- Minimum Board Thickness: 1/32"
- Drum Diameter: 6"
- Number of Sanding Drums: 2
- Drum Length: 37"
- Drum Speed: 1700 RPM
- Conveyor Motor: 1/4 HP
- Dust Port Outside Diameter: 4" (dual ports)
- Dust Collection Minimum CFM Required: 1200 cu.ft/min
- Motor Power: 10 HP
- Motor Voltage: 230 / 460 V
- Prewired Voltage: 230 V
- Motor Phase: 3 Ph
- Model Number: DDS-237
- Brand: Powermatic
- Dimensions: 60" x 45" x 45"
- Weight: 990 lbs
UPC - 662755945816
This item is covered by WMH's 5 Year Warranty.
WMH Stands behind every product it sells with outstanding customer service and support. Their multitude of service repair centers offer quick turnarounds and most of the time they can authorize warranty repair, assist you in locating replacement parts, and perform routine maintenance and large repairs on your tools and machinery. To find a service center near you, please call 1-800-274-6848.
Overall Rating for Powermatic 1791321 Model DDS-237 10 HP 3 PH 37" Dual Drum Sander
|(no reviews)||Be the first to rate and review this item|