Astro Pneumatic 4607 5" Hook and Loop Flexible Backing Plate 5x
The 4607 includes:
- 5x Includes (1) Astro 5" Hook and Loop Flexible Urethane Backing Plate
- Use with your Porter-Cable 7424 or 7424XP polisher
- Dual-action, flexible design minimizes heat transfer and forms itself to match the curves of your car
- Features a molded hook and loop service for quick and easy pad changes
- Unique properties of the molded urethan construction make this backing plate a true performer
- Small enough to provide an adequate buffer zone between the edge of the foam pad and the molded urethan constructed backing plate
Whether it's for a 7424XP or 21mm Bigfoot polisher, DA or finisher sander, the 4607 is designed to be versatile enough to work on most all pad materials. Using a thicker J-Hook design made from a more heat resistant material, and implementing a new stronger adhesive, the hook & loop backing now lasts even longer in heavy use applications. By using a medium-hard density poly foam with a thin gradual tapered edge, the 4607 acts more like a soft pad on the edges for feathering work and tight curves, while lasting longer overall for the tough work.
ATTENTION:When you open the plastic package, unscrew and discard the plastic cap that's located on the label side of the plate before use.
- Brand: Astro Pneumatic
- Model: 4607
- MPN: 4607
- UPC: 745227014064,
- Type: Backing Plate
- Size: 5" x 5/16" x 24 Threads
- Maximum operating Speed: 10,000 RPM
- Color: Yellow
- Package Qty.: 4
1 Year Standard WarrantyAstro Pneumatic Tool Co. warrants these products to the original user against defective material or workmanship for a period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The distributor should direct the original user to return the product with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem. Failures caused by accident, alteration, or misuse are not covered by this warranty.
Product with Multiple ComponentsAstro will replace free of charge any part of a component product that fails within 1 year of first use by the original user. See New Defective statement for how to obtain the replacement. Items included in this category include kits, hand tool kits and any other product where there are multiple items or components that make up the unit. Please call 800-221-9705 to obtain product components covered under warranty.
Hydraulic Power Unit ExchangeAstro will replace free of charge the power unit on select hydraulic equipment. Please call 800-221-9705 to arrange for replacement.
General Warranty TermsAstro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners.
This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. All claims must be sent to:
Attn: Customer Service
2417 Seaman Ave., South El Monte, CA 91733
NEW DEFECTIVENew defective product is product that does not function properly the first time used. Astro will replace "free of charge” to the original user any product that is deemed to be "New Defective". Original user may email email@example.com, call: 800-221-9705 or fax: 877-318-2194 a request to Customer Service for replacement with 1) proof of purchase or copy of warranty card and 2) a statement explaining the problem. Astro reserves the right to request that the original user return the New Defective product, freight collect, for evaluation prior to providing a replacement. Astro will pre-pay the freight on the replacement unit.
All new defective returns are to be sent to:
372 OLD US HIGHWAY 52 SOUTH MT. AIRY, NC 27030
REPAIRSAstro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. All repairs are to be sent to:
2417 SEAMAN AVE. SOUTH EL MONTE, CA 91733