DeWalt DWS5029 Replacement Anti-Splinter Strip / Tracksaw Rail 2x
The DWS5029 includes:
- 2x DeWalt DWS5029 Roll of Anti-Splinter Replacement Strip
- Replacement zero-clearance anti-splinter edge
- Comes with 118" of replacement strip
- Easy to remove old stripping and to install
Remove the existing strip using a blunt scraper and appropriate acetone or organic based solvent. When existing strip and adhesive are completely removed and the surface is clean and dry the new strip can be applied. Be careful not to stretch the strip as it is applied. Force should be applied to strip when it is in position to make certain the two surfaces have bonded uniformly and no air gaps are present. The track can now be used immediately.
Place the track on a scrap piece of wood.
Set the track saw to 3/16" (5mm) cut depth.
Set TrackSaw to maximum speed.
Place the saw on the rear end of the guide track.
Turn the saw on, plunge TrackSaw set cutting depth and cut the Anti-Splinter Strip along the full length in one continuous operation.
- Brand: DeWalt
- Model: DWS5029
- MPN: DWS5029
- UPC: 885911085519
- Type: Tracksaw Rail
- Item Weight: 8.2 ounces
- Product Dimensions: 7.4 x 0.9 x 6.5 inches
- Package Qty.: 2
Most DeWalt Tools purchased on or after January 1, 2004 come with a warranty package that includes a Three-Year Limited Warranty and a One-Year Free Service Contract. DeWalt Hand Tools and Mechanics tools are covered by a Limited lifetime warranty. For specific tool exceptions and warranty information on tools purchased before January 1, 2004, please visit http://bdk.force.com/FAQ/PKB_Search?brand=DeWALT