You're currently browsing our Torque Wrenches and Torque Tools department

Torque wrenches give you the ability to apply a precise amount of power to each and every nut and bolt. From the barest amount of pressure-from as little as 10 ft-lbs to as many as 600 ft-lbs. Not only can a good torque wrench provide the leverage and power you need for the toughest of tasks, but they can also restrain to the barest pressure.

Proto  0.5% Bench Mount Transducers *ALL*
Proto Tools Logo

Proto 0.5% Bench Mount Transducers *ALL*

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester
  • No need to own separate torque testers and electronic torque wrenches
From $981.21
View Item
Proto  1.0% In-Line Extension Transducers *ALL*
Proto Tools Logo

Proto 1.0% In-Line Extension Transducers *ALL*

  • In-line extension transducers, connect between a wrench and a socket to measure the torque that is applied to a fastener.
  • This versatile type of transducer converts a hand held torque meter (J6360) into a highly accurate digital torque wrench
  • In-line transducers can also be used as torque wrench testers when mounted to a fixture
From $545.12
View Item
Proto  Dial Electronic Torque Wrenches *ALL*
Proto Tools Logo

Proto Dial Electronic Torque Wrenches *ALL*

  • Extended operation range in ft-lb and Nm units.
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
From $441.33
View Item
Proto  Dial Torque Wrenches - FT-LBS/MKG
Proto Tools Logo

Proto Dial Torque Wrenches - FT-LBS/MKG

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
  • High alloy torsion drive design - accuracy not effected by hand position.
From $197.55
View Item
Proto  Dial Torque Wrenches - IN-LBS/CMKG
Proto Tools Logo

Proto Dial Torque Wrenches - IN-LBS/CMKG

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
From $149.00
View Item
Proto  Electronic Torque Testers *ALL*
Proto Tools Logo

Proto Electronic Torque Testers *ALL*

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
From $879.00
View Item
Proto  Fixed Head Micrometer Torque Wrenches - FT-LBS
Proto Tools Logo

Proto Fixed Head Micrometer Torque Wrenches - FT-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
  • Calibration is accomplished by manual loading the torque wrenches.
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
From $147.86
View Item
Proto  Ratcheting Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Ratcheting Head Micrometer Torque Wrenches - IN-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
From $126.95
View Item
Proto  Ratcheting Head Micrometer Torque Wrenches - NM
Proto Tools Logo

Proto Ratcheting Head Micrometer Torque Wrenches - NM

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
From $155.56
View Item
Proto J6006C 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80
Proto Tools Logo

Proto J6006C 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$135.99
View Item
Special for this item!
Proto J6006NMC-TT Tether-Ready Ratcheting Head Torque Wrench
Proto Tools Logo

Proto J6006NMC-TT Tether-Ready Ratcheting Head Torque Wrench

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$182.44
View Item
Special for this item!
Proto J6008CXCERT 1/2" Drive Ratcheting Head Torque Wrench 16-80 ft-lbs
Proto Tools Logo

Proto J6008CXCERT 1/2" Drive Ratcheting Head Torque Wrench 16-80 ft-lbs

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$196.49
View Item
Special for this item!
Proto J6012C-TT 3/8" Drive Tether-Ready Micrometer Torque Wrench
Proto Tools Logo

Proto J6012C-TT 3/8" Drive Tether-Ready Micrometer Torque Wrench

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$159.00
View Item
Special for this item!
Proto J6013C 1/2" Drive Fixed Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6013C 1/2" Drive Fixed Head Micrometer Torque Wrench (FT-LBS)

  • Calibrated to +/- 4% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
$158.20
View Item
Special for this item!
Proto J6014C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6014C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$169.00
View Item
Special for this item!
Proto J6014C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 2x
Proto Tools Logo

Proto J6014C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 2x

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$329.00
View Item
Special for this item!
Proto J6014C-TT 1/2" Drive Teather-Ready Torque Wrench Ratcheting Head
Proto Tools Logo

Proto J6014C-TT 1/2" Drive Teather-Ready Torque Wrench Ratcheting Head

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$204.12
View Item
Special for this item!
Proto J6014CXCERT 1/2" Dr Ratcheting Head Torque Wrench 50-250 ft-lbs
Proto Tools Logo

Proto J6014CXCERT 1/2" Dr Ratcheting Head Torque Wrench 50-250 ft-lbs

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$189.00
View Item
Special for this item!
Proto J6015C 1/2" Drive Fixed Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6015C 1/2" Drive Fixed Head Micrometer Torque Wrench (FT-LBS)

  • Calibrated to +/- 4% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
$147.86
View Item
Special for this item!
Proto J6016C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6016C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)

1 Review
  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$158.95
View Item
Special for this item!
Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 2x
Proto Tools Logo

Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 2x

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$305.00
View Item
Special for this item!
Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 4x
Proto Tools Logo

Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 4x

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$585.00
View Item
Special for this item!
Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 8x
Proto Tools Logo

Proto J6016C 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) 8x

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$1,159.00
View Item
Special for this item!
Proto J6016NMC 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6016NMC 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
$155.56
View Item
Special for this item!
Proto J6016NMC-TT 3/8" Drive Tether-Ready Torque Wrench 40-200 Nm
Proto Tools Logo

Proto J6016NMC-TT 3/8" Drive Tether-Ready Torque Wrench 40-200 Nm

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$182.44
View Item
Special for this item!
Proto J6017B 3/4" Dr Fixed Head Micrometer Torque Wrench 120-600 ft-lbs
Proto Tools Logo

Proto J6017B 3/4" Dr Fixed Head Micrometer Torque Wrench 120-600 ft-lbs

  • Calibrated to +/- 4% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
$679.38
View Item
Special for this item!
Proto J6018AB 3/4" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6018AB 3/4" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$458.88
View Item
Special for this item!
Proto J6018CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6018CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$543.47
View Item
Special for this item!
Proto J6018CXCERT 3/4" Dr Ratcheting Head Torque Wrench 60-300 ft-lbs
Proto Tools Logo

Proto J6018CXCERT 3/4" Dr Ratcheting Head Torque Wrench 60-300 ft-lbs

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$603.87
View Item
Special for this item!
Proto J6020AB 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6020AB 3/4" Drive Ratcheting Head Micrometer Torque Wrench

  • 600FT-LBS
  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
$565.00
View Item
Special for this item!
Proto J6020CXCERT Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6020CXCERT Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$865.63
View Item
Special for this item!
Proto J6020NM 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6020NM 3/4" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$632.37
View Item
Special for this item!
Proto J6022B 1" Drive Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto J6022B 1" Drive Ratcheting Head Micrometer Torque Wrench (FT-LBS)

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$762.95
View Item
Special for this item!
Proto J6023 1" Drive Drive Fixed Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6023 1" Drive Drive Fixed Head Micrometer Torque Wrench

  • Includes an extension handle
  • Torque wrench is 40" long. Weight and over all length are for torque wrench with the extension handle
  • Packaged in a metal box for easy storage
$1,299.00
View Item
Special for this item!
Proto J6025 1" Dr Fixed Head Micrometer Torque Wrench 400-2000 ft-lbs
Proto Tools Logo

Proto J6025 1" Dr Fixed Head Micrometer Torque Wrench 400-2000 ft-lbs

  • Includes two extension handles, each 43" long
  • Torque wrench is 34-1/4" long. Weight and overall length are for torque wrench assembled with both extension handles
  • Calibrated ±4% of torque reading clockwise at 20% to 100% of full scale
$2,099.00
View Item
Special for this item!
Proto J6060A 1/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6060A 1/4" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction and +/- 4% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$126.95
View Item
Special for this item!
Proto J6061CX 1/4" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb
Proto Tools Logo

Proto J6061CX 1/4" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$157.95
View Item
Special for this item!
Proto J6064C 3/8" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6064C 3/8" Drive Ratcheting Head Micrometer Torque Wrench

2 Reviews
  • Calibrated to +/- 4% clockwise direction and +/- 4% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$129.00
View Item
Special for this item!
Proto J6065CX 3/8" Drive Fixed Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6065CX 3/8" Drive Fixed Head Micrometer Torque Wrench

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$173.23
View Item
Special for this item!
Proto J6065CXCERT 3/8" Drive Fixed Head Torque Wrench Certified
Proto Tools Logo

Proto J6065CXCERT 3/8" Drive Fixed Head Torque Wrench Certified

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$187.85
View Item
Special for this item!
Proto J6066C 3/8" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6066C 3/8" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$149.00
View Item
Special for this item!
Proto J6066CXCERT 3/8" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6066CXCERT 3/8" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only
$192.97
View Item
Special for this item!
Proto J6068C 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6068C 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$161.11
View Item
Special for this item!
Proto J6072C 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6072C 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$165.89
View Item
Special for this item!
Proto J6072CX 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6072CX 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manually loading the torque wrench
  • Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
$196.15
View Item
Special for this item!
Proto J6072CXCERT 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto J6072CXCERT 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only
$215.81
View Item
Special for this item!
Proto J6113NMF 3/8" Drive Drive Dial Torque Wrench 14-70Nm, 10-50 ft-lb
Proto Tools Logo

Proto J6113NMF 3/8" Drive Drive Dial Torque Wrench 14-70Nm, 10-50 ft-lb

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$168.21
View Item
Special for this item!
Proto J6121NMF 1/2-Inch Drive Dial Torque Wrench, 50-250Nm, 35-175-Feet Pound
Proto Tools Logo

Proto J6121NMF 1/2-Inch Drive Dial Torque Wrench, 50-250Nm, 35-175-Feet Pound

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$185.26
View Item
Special for this item!
Proto J6125F 1/2" Drive Dial Torque Wrench
Proto Tools Logo

Proto J6125F 1/2" Drive Dial Torque Wrench

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
$197.55
View Item
Special for this item!
Proto J6133F 3/4" Drive Dial Torque Wrench
Proto Tools Logo

Proto J6133F 3/4" Drive Dial Torque Wrench

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
$399.00
View Item
Special for this item!
Proto J6141F 1" Drive Dial Torque Wrench
Proto Tools Logo

Proto J6141F 1" Drive Dial Torque Wrench

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
$899.00
View Item
Special for this item!
Proto J6149F 1" Drive Dial Torque Wrench
Proto Tools Logo

Proto J6149F 1" Drive Dial Torque Wrench

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
$1,811.60
View Item
Special for this item!
Proto J6168F 1/4" Drive Dial Torque Wrench 6-30 IN-LBS
Proto Tools Logo

Proto J6168F 1/4" Drive Dial Torque Wrench 6-30 IN-LBS

  • 6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
$150.79
View Item
Special for this item!
Proto J6169F 1/4" Drive Dial Torque Wrench 15-75 IN-LBS
Proto Tools Logo

Proto J6169F 1/4" Drive Dial Torque Wrench 15-75 IN-LBS

  • 6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
$149.00
View Item
Special for this item!
Proto J6169NMF 1/4" Drive Drive Dial Torque Wrench 2-10 Nm, 18-90 in-lb
Proto Tools Logo

Proto J6169NMF 1/4" Drive Drive Dial Torque Wrench 2-10 Nm, 18-90 in-lb

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$166.73
View Item
Special for this item!
Proto J6177F 3/8" Drive Dial Torque Wrench 50-250 IN-LBS
Proto Tools Logo

Proto J6177F 3/8" Drive Dial Torque Wrench 50-250 IN-LBS

  • 6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
$156.50
View Item
Special for this item!
Proto J6177NMF 3/8-Inch Drive Dial Torque Wrench, 6-30 Nm, 50-250-Inch Pound
Proto Tools Logo

Proto J6177NMF 3/8-Inch Drive Dial Torque Wrench, 6-30 Nm, 50-250-Inch Pound

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$166.73
View Item
Special for this item!
Proto J6181F 3/8" Drive Dial Torque Wrench 120-600 IN-LBS
Proto Tools Logo

Proto J6181F 3/8" Drive Dial Torque Wrench 120-600 IN-LBS

  • 6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
$169.64
View Item
Special for this item!
Proto J6280TA100 3/8" Dr Digital Torque and Angle Adapter 5-99.5 ft-lbs
Proto Tools Logo

Proto J6280TA100 3/8" Dr Digital Torque and Angle Adapter 5-99.5 ft-lbs

  • Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors and delivers high precision
  • +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy
  • +/-3% clockwise or +/-4% counter clockwise for torque accuracy
$189.00
View Item
Special for this item!
Proto J6280TA150 1/2" Drive Digital Torque, Angle Adapter
Proto Tools Logo

Proto J6280TA150 1/2" Drive Digital Torque, Angle Adapter

  • Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors and delivers high precision
  • +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy
  • +/-3% clockwise or +/-4% counter clockwise for torque accuracy
$213.48
View Item
Special for this item!
Proto J6280TA250 1/2"Dr Digital Torque Angle Adapter12.5-250ft-lb
Proto Tools Logo

Proto J6280TA250 1/2"Dr Digital Torque Angle Adapter12.5-250ft-lb

  • Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors and delivers high precision
  • +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy
  • +/-3% clockwise or +/-4% counter clockwise for torque accuracy
$197.50
View Item
Special for this item!
Proto J6339 1/4" Drive Dial Electronic Torque Wrench 7.5-75 IN-LBS
Proto Tools Logo

Proto J6339 1/4" Drive Dial Electronic Torque Wrench 7.5-75 IN-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$441.33
View Item
Special for this item!
Proto J6342 1/4" Drive Dial Electronic Torque Wrench 10-100 IN-LBS
Proto Tools Logo

Proto J6342 1/4" Drive Dial Electronic Torque Wrench 10-100 IN-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$468.56
View Item
Special for this item!
Proto J6345 3/8" Drive Dial Electronic Torque Wrench 25-250 IN-LBS
Proto Tools Logo

Proto J6345 3/8" Drive Dial Electronic Torque Wrench 25-250 IN-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$509.83
View Item
Special for this item!
Proto J6345A 3/8" Drive Dial Electronic Torque Wrench 5-50 FT-LBS
Proto Tools Logo

Proto J6345A 3/8" Drive Dial Electronic Torque Wrench 5-50 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$505.47
View Item
Special for this item!
Proto J6345B 1/2" Drive Dial Electronic Torque Wrench 10-100 FT-LBS
Proto Tools Logo

Proto J6345B 1/2" Drive Dial Electronic Torque Wrench 10-100 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$517.88
View Item
Special for this item!
Proto J6346 1/2" Drive Dial Electronic Torque Wrench 25-250 FT-LBS
Proto Tools Logo

Proto J6346 1/2" Drive Dial Electronic Torque Wrench 25-250 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$574.37
View Item
Special for this item!
Proto J6347 3/4" Drive Dial Electronic Torque Wrench 60-600 FT-LBS
Proto Tools Logo

Proto J6347 3/4" Drive Dial Electronic Torque Wrench 60-600 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$1,282.36
View Item
Special for this item!
Proto J6349 1" Drive Dial Electronic Torque Wrench 100-1000 FT-LBS
Proto Tools Logo

Proto J6349 1" Drive Dial Electronic Torque Wrench 100-1000 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$2,096.15
View Item
Special for this item!
Proto J6349A 3/4" Dr Torque Multiplier Replacement Kit
Proto Tools Logo

Proto J6349A 3/4" Dr Torque Multiplier Replacement Kit

  • When placed between the torque multiplier and the fastener, the Proto Torque Multiplier Display Wrench will display the actual torque applied to the fastener
  • Precision Accuracy: + / - 1% in BOTH directions
$1,849.56
View Item
Special for this item!
Proto J6351 1" Drive Dial Electronic Torque Wrench 200-2000 FT-LBS
Proto Tools Logo

Proto J6351 1" Drive Dial Electronic Torque Wrench 200-2000 FT-LBS

  • Extended operation range in ft-lb, in-lb and Nm units
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
$2,367.42
View Item
Special for this item!
Proto J6352 1" Drive Torque Multiplier Display Wrench 200-2000 FT-LB
Proto Tools Logo

Proto J6352 1" Drive Torque Multiplier Display Wrench 200-2000 FT-LB

  • When placed between the torque multiplier and the fastener, the Proto Torque Multiplier Display Wrench will display the actual torque applied to the fastener
  • Precision Accuracy: + / - 1% in BOTH directions
  • Easy to read display
$2,184.44
View Item
Special for this item!
Proto J6362 3/8" Drive 1.0% In-Line Extension Transducer 5-50 FT-LBS
Proto Tools Logo

Proto J6362 3/8" Drive 1.0% In-Line Extension Transducer 5-50 FT-LBS

  • In-line extension transducers, connect between a wrench and a socket
  • 1.0% In-Line Extension Transducer
  • 3/8-inch Drive size
$545.12
View Item
Special for this item!
Proto J6363 1/2" Drive 1.0% In-Line Extension Transducer 15-150 FT-LBS
Proto Tools Logo

Proto J6363 1/2" Drive 1.0% In-Line Extension Transducer 15-150 FT-LBS

  • In-line extension transducers, connect between a wrench and a socket
  • 1.0% In-Line Extension Transducer
  • 1/2-inch Drive size
$570.28
View Item
Special for this item!
Proto J6364 1/2" Drive 1.0% In-Line Extension Transducer 25-250 FT-LBS
Proto Tools Logo

Proto J6364 1/2" Drive 1.0% In-Line Extension Transducer 25-250 FT-LBS

  • In-line extension transducers, connect between a wrench and a socket
  • 1.0% In-Line Extension Transducer
  • 1/2-inch Drive size
$599.64
View Item
Special for this item!
Proto J6365 1/4" Drive 0.5% Bench Mount Transducer 10-100 IN-LBS
Proto Tools Logo

Proto J6365 1/4" Drive 0.5% Bench Mount Transducer 10-100 IN-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$981.21
View Item
Special for this item!
Proto J6366 3/8" Drive 0.5% Bench Mount Transducer 25-250 IN-LBS
Proto Tools Logo

Proto J6366 3/8" Drive 0.5% Bench Mount Transducer 25-250 IN-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,006.39
View Item
Special for this item!
Proto J6367 3/8" Drive 0.5% Bench Mount Transducer 5-50 FT-LBS
Proto Tools Logo

Proto J6367 3/8" Drive 0.5% Bench Mount Transducer 5-50 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,006.39
View Item
Special for this item!
Proto J6368 1/2" Drive 0.5% Bench Mount Transducer 25-250 FT-LBS
Proto Tools Logo

Proto J6368 1/2" Drive 0.5% Bench Mount Transducer 25-250 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,165.72
View Item
Special for this item!
Proto J6370 Bracket for Bench Mount Transducers
Proto Tools Logo

Proto J6370 Bracket for Bench Mount Transducers

  • Heavy-duty mounting bracket for bench mount transducers.
  • Use up to 600 ft-lbs
  • Bracket for Bench Mount Transducers
$287.08
View Item
Special for this item!
Proto J6371 1/4" Drive 0.5% Bench Mount Transducer 5-50 IN-LBS
Proto Tools Logo

Proto J6371 1/4" Drive 0.5% Bench Mount Transducer 5-50 IN-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,035.75
View Item
Special for this item!
Proto J6372 1/2" Drive 0.5% Bench Mount Transducer 15-150 FT-LBS
Proto Tools Logo

Proto J6372 1/2" Drive 0.5% Bench Mount Transducer 15-150 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,099.86
View Item
Special for this item!
Proto J6373 3/4" Drive 0.5% Bench Mount Transducer 60-600 FT-LBS
Proto Tools Logo

Proto J6373 3/4" Drive 0.5% Bench Mount Transducer 60-600 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$1,381.00
View Item
Special for this item!
Proto J6374 1" Drive 0.5% Bench Mount Transducer 100-1000 FT-LBS
Proto Tools Logo

Proto J6374 1" Drive 0.5% Bench Mount Transducer 100-1000 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$3,403.17
View Item
Special for this item!
Proto J6375 1" Drive 0.5% Bench Mount Transducer 200-2000 FT-LBS
Proto Tools Logo

Proto J6375 1" Drive 0.5% Bench Mount Transducer 200-2000 FT-LBS

  • "Plug and play" torque transducers. Automatic set-up of transducers means user friendly operation and less down time
  • Versatile all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester. No need to own separate torque testers and electronic torque wrenches
  • First peak of torque mode allows hand calibration of click type torque wrenches
$3,726.23
View Item
Special for this item!
Proto J6470 1/4" Drive Electronic Torque Tester 5-50 IN-LBS
Proto Tools Logo

Proto J6470 1/4" Drive Electronic Torque Tester 5-50 IN-LBS

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
$887.78
View Item
Special for this item!
Proto J6470-C 1/4" Drive Electronic USB Torque Tester 5-50 IN-LBS
Proto Tools Logo

Proto J6470-C 1/4" Drive Electronic USB Torque Tester 5-50 IN-LBS

  • Powers the tester via USB cable
  • Recharges internal Nimh battery
  • Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW
$1,409.18
View Item
Special for this item!
Proto J6470S Torque Tester Floor Stand
Proto Tools Logo

Proto J6470S Torque Tester Floor Stand

  • Floor stand for Proto Torque Testing systems makes installation quick and easy
  • All steel construction
  • Mounting holes predrilled to match Proto test systems
$225.67
View Item
Special for this item!
Proto J6472 3/8" Drive Electronic Torque Tester 25-250 IN-LBS
Proto Tools Logo

Proto J6472 3/8" Drive Electronic Torque Tester 25-250 IN-LBS

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
$887.78
View Item
Special for this item!
Proto J6472-C 3/8" Drive Electronic USB Torque Tester 25-250 IN-LBS
Proto Tools Logo

Proto J6472-C 3/8" Drive Electronic USB Torque Tester 25-250 IN-LBS

  • Powers the tester via USB cable
  • Recharges internal Nimh battery
  • Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW
$1,392.91
View Item
Special for this item!
Proto J6474 3/8" Drive Electronic Torque Tester 5-50 FT-LBS
Proto Tools Logo

Proto J6474 3/8" Drive Electronic Torque Tester 5-50 FT-LBS

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
$879.00
View Item
Special for this item!
Proto J6474-C 3/8" Drive Electronic USB Torque Tester 5-50 FT-LBS
Proto Tools Logo

Proto J6474-C 3/8" Drive Electronic USB Torque Tester 5-50 FT-LBS

  • Powers the tester via USB cable
  • Recharges internal Nimh battery
  • Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW
$1,510.95
View Item
Special for this item!
Proto J6476 1/2" Drive Electronic Torque Tester 25-250 FT-LBS
Proto Tools Logo

Proto J6476 1/2" Drive Electronic Torque Tester 25-250 FT-LBS

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
$979.03
View Item
Special for this item!
Proto J6476-C 1/2" Drive Electronic USB Torque Tester 25-250 FT-LBS
Proto Tools Logo

Proto J6476-C 1/2" Drive Electronic USB Torque Tester 25-250 FT-LBS

  • Powers the tester via USB cable
  • Recharges internal Nimh battery
  • Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW
$1,652.60
View Item
Special for this item!
Proto J6478 3/4" Drive Electronic Torque Tester 60-600 FT-LBS
Proto Tools Logo

Proto J6478 3/4" Drive Electronic Torque Tester 60-600 FT-LBS

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
  • Broad accuracy range extends from 10% to 100% of full scale
$1,230.57
View Item
Special for this item!
Proto JH4-250 1/4" Electronic Interchangeable Head Torque Wrench
Proto Tools Logo

Proto JH4-250 1/4" Electronic Interchangeable Head Torque Wrench

  • Full interface with Proto Interchangeable Head Attachments.
  • Broad accuracy range extends from 10% of Full Scale to 100% of Full Scale to help reduce the number of torque wrenches required
  • Ninety-nine -inch on-board-inch memory storage locations help improve efficiency when taking multiple torque readings
$274.09
View Item
Special for this item!
Proto JH5-100F 3/8" Electronic Interchangeable Head Torque Wrench
Proto Tools Logo

Proto JH5-100F 3/8" Electronic Interchangeable Head Torque Wrench

  • Full interface with Proto Interchangeable Head Attachments.
  • Broad accuracy range extends from 10% of Full Scale to 100% of Full Scale to help reduce the number of torque wrenches required
  • Ninety-nine -inch on-board-inch memory storage locations help improve efficiency when taking multiple torque readings
$281.50
View Item
Special for this item!
Proto JH5-6006C 3/8" Electronic Interchangeable Head Trq Wrench
Proto Tools Logo

Proto JH5-6006C 3/8" Electronic Interchangeable Head Trq Wrench

  • Full interface with Proto Interchangeable Head Attachments
  • Accuracy of +/-4% CW and +/-6% CCW
  • Meets or exceeds ASME B107.14M specification
$204.11
View Item
Special for this item!
Proto JH7-6014C 1/2" Micrometer Interchangeable Head Trq Wrench
Proto Tools Logo

Proto JH7-6014C 1/2" Micrometer Interchangeable Head Trq Wrench

  • Full interface with Proto Interchangeable Head Attachments
  • Accuracy of +/-4-Percent CW and +/-6-Percent CCW
  • Two sizes available
$225.67
View Item
Special for this item!

View discontinued Torque Wrenches and Torque Tools

Proto Tool  Fixed Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Tool Fixed Head Micrometer Torque Wrenches - IN-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
Proto Tool  Fixed Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Tool Fixed Head Micrometer Torque Wrenches - IN-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
Proto Tool J6014CX 1/2" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6014CX 1/2" Drive Ratcheting Head Micrometer Torque Wrench

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
Top Sellers in This Category

Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Instagram Image Facebook ImageTwitter Image


Bill Me Later from Paypal

Tools-Plus.com Customer Comments
MADE IN USA Products