You're currently browsing our Torque Wrenches department

Precision Torque Tools is just one of the numerous categories of tools and accessories offered at Tools-Plus.com. Shop with confidence knowing that Tools-Plus.com is an Authorized Internet Retailer.

Proto Tool  Dial Electronic Torque Wrenches *ALL*
Proto Tools Logo

Proto Tool Dial Electronic Torque Wrenches *ALL* TRQWREDIALELEC

  • Extended operation range in ft-lb and Nm units.
  • Precision Accuracy: + / - 1% in BOTH directions
  • Accuracy valid from 10% to 100% of full scale
From $441.33
View Item
Proto Tool  Dial Torque Wrenches - FT-LBS/MKG
Proto Tools Logo

Proto Tool Dial Torque Wrenches - FT-LBS/MKG TRQWREDIAFTLBMKG

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
  • High alloy torsion drive design - accuracy not effected by hand position.
From $197.55
View Item
Proto Tool  Dial Torque Wrenches - IN-LBS/CMKG
Proto Tools Logo

Proto Tool Dial Torque Wrenches - IN-LBS/CMKG TRQWREDIAINLBCKG

  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale
  • Industrial all steel or aluminum torque transfer components
  • High alloy torsion drive design - accuracy not effected by hand position
From $150.79
View Item
Proto Tool  Fixed Head Micrometer Torque Wrenches - FT-LBS
Proto Tools Logo

Proto Tool Fixed Head Micrometer Torque Wrenches - FT-LBS TRQWREFIXFTLBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
  • Calibration is accomplished by manual loading the torque wrenches.
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
From $147.86
View Item
Proto Tool  Fixed Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Tool Fixed Head Micrometer Torque Wrenches - IN-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
From $157.95
View Item
Proto Tool  Ratcheting Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Tool Ratcheting Head Micrometer Torque Wrenches - IN-LBS TRQWRERATINLB

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
From $129.00
View Item
Proto Tool  Ratcheting Head Micrometer Torque Wrenches - NM
Proto Tools Logo

Proto Tool Ratcheting Head Micrometer Torque Wrenches - NM TRQWRERATNM

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale
  • Calibration is accomplished by manual loading the torque wrenches
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
From $155.56
View Item
Proto Tool J6006C 2pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80
Proto Tools Logo

Proto Tool J6006C 2 Pk 2pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80 J6006C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$269.00
View Item
Special for this item!
Proto Tool J6006C 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80
Proto Tools Logo

Proto Tool J6006C 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80 J6006C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$139.50
View Item
Special for this item!
Proto Tool J6006C 4pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80
Proto Tools Logo

Proto Tool J6006C 4 Pk 4pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80 J6006C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$535.00
View Item
Special for this item!
Proto Tool J6006C 8pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80
Proto Tools Logo

Proto Tool J6006C 8 Pk 8pk 3/8"dr Ratcheting Head Micrometer Torque Wrench 16-80 J6006C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$1,045.00
View Item
Special for this item!
Proto Tool J6006NMC-TT Tether-Ready Ratcheting Head Torque Wrench
Proto Tools Logo

Proto Tool J6006NMC-TT Tether-Ready Ratcheting Head Torque Wrench J6006NMC-TT

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$182.44
View Item
Special for this item!
Proto Tool J6008C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6008C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6008C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$146.95
View Item
Special for this item!
Proto Tool J6008CXCERT 1/2" Drive Ratcheting Head Torque Wrench 16-80 ft-lbs
Proto Tools Logo

Proto Tool J6008CXCERT 1/2" Drive Ratcheting Head Torque Wrench 16-80 ft-lbs J6008CXCERT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$196.49
View Item
Special for this item!
Proto Tool J6012C 3/8"dr Ratcheting Head Micrometer Torque Wrench 20-100
Proto Tools Logo

Proto Tool J6012C 3/8"dr Ratcheting Head Micrometer Torque Wrench 20-100 J6012C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$139.00
View Item
Special for this item!
Proto Tool J6012C-TT 3/8" Drive Tether-Ready Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6012C-TT 3/8" Drive Tether-Ready Micrometer Torque Wrench J6012C-TT

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$169.00
View Item
Special for this item!
Proto Tool J6014C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6014C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6014C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$169.50
View Item
Special for this item!
Proto Tool J6014C 2pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6014C 2 Pk 2pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6014C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$315.00
View Item
Special for this item!
Proto Tool J6014C 4pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6014C 4 Pk 4pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6014C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$599.00
View Item
Special for this item!
Proto Tool J6014C 8pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6014C 8 Pk 8pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6014C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$1,175.00
View Item
Special for this item!
Proto Tool J6014C-TT 1/2" Drive Teather-Ready Torque Wrench Ratcheting Head
Proto Tools Logo

Proto Tool J6014C-TT 1/2" Drive Teather-Ready Torque Wrench Ratcheting Head J6014C-TT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$204.12
View Item
Special for this item!
Proto Tool J6014CXCERT 1/2" Dr Ratcheting Head Torque Wrench 50-250 ft-lbs
Proto Tools Logo

Proto Tool J6014CXCERT 1/2" Dr Ratcheting Head Torque Wrench 50-250 ft-lbs J6014CXCERT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$228.87
View Item
Special for this item!
Proto Tool J6016C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6016C 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6016C

1 Review
  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$159.95
View Item
Special for this item!
Proto Tool J6016C 2pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6016C 2 Pk 2pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6016C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$305.00
View Item
Special for this item!
Proto Tool J6016C 4pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6016C 4 Pk 4pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6016C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$585.00
View Item
Special for this item!
Proto Tool J6016C 8pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6016C 8 Pk 8pk 1/2" Dr Ratcheting Micrometer Torque Wrench (FT-LBS) J6016C

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$1,159.00
View Item
Special for this item!
Proto Tool J6016CX 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6016CX 1/2" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6016CX

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$186.46
View Item
Special for this item!
Proto Tool J6016CXCERT 1/2"Dr Certified Ratcheting Head Torque Wrench 30-150
Proto Tools Logo

Proto Tool J6016CXCERT 1/2"Dr Certified Ratcheting Head Torque Wrench 30-150 J6016CXCERT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents (included) traceable to N.I.S.T. (National Institute of Standards and Technology).
$199.00
View Item
Special for this item!
Proto Tool J6016NMC-TT 3/8" Drive Tether-Ready Torque Wrench 40-200 Nm
Proto Tools Logo

Proto Tool J6016NMC-TT 3/8" Drive Tether-Ready Torque Wrench 40-200 Nm J6016NMC-TT

  • Tether-Ready with Heat Shrink Loop.
  • For Use with Elastic Bungie or Web Lanyard Only.
  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
$182.44
View Item
Special for this item!
Proto Tool J6018AB 3/4" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6018AB 3/4" Dr Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6018AB

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$458.88
View Item
Special for this item!
Proto Tool J6018CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6018CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench J6018CX

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$543.47
View Item
Special for this item!
Proto Tool J6018CXCERT 3/4" Dr Ratcheting Head Torque Wrench 60-300 ft-lbs
Proto Tools Logo

Proto Tool J6018CXCERT 3/4" Dr Ratcheting Head Torque Wrench 60-300 ft-lbs J6018CXCERT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$603.87
View Item
Special for this item!
Proto Tool J6020AB 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6020AB 3/4" Drive Ratcheting Head Micrometer Torque Wrench J6020AB

  • 600FT-LBS
  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
$599.00
View Item
Special for this item!
Proto Tool J6020CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6020CX 3/4" Drive Ratcheting Head Micrometer Torque Wrench J6020CX

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$779.05
View Item
Special for this item!
Proto Tool J6020CXCERT 3/4" Dr Ratcheting Head Torque Wrench 120-600 ft-lbs
Proto Tools Logo

Proto Tool J6020CXCERT 3/4" Dr Ratcheting Head Torque Wrench 120-600 ft-lbs J6020CXCERT

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$865.63
View Item
Special for this item!
Proto Tool J6022B 1" Drive Ratcheting Head Micrometer Torque Wrench (FT-LBS)
Proto Tools Logo

Proto Tool J6022B 1" Drive Ratcheting Head Micrometer Torque Wrench (FT-LBS) J6022B

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
$762.95
View Item
Special for this item!
Proto Tool J6023 1" Drive Drive Fixed Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6023 1" Drive Drive Fixed Head Micrometer Torque Wrench J6023

  • Includes an extension handle
  • Torque wrench is 40" long. Weight and over all length are for torque wrench with the extension handle
  • Packaged in a metal box for easy storage
$1,345.00
View Item
Special for this item!
Proto Tool J6025 1" Dr Fixed Head Micrometer Torque Wrench 400-2000 ft-lbs
Proto Tools Logo

Proto Tool J6025 1" Dr Fixed Head Micrometer Torque Wrench 400-2000 ft-lbs J6025

  • Includes two extension handles, each 43" long
  • Torque wrench is 34-1/4" long. Weight and overall length are for torque wrench assembled with both extension handles
  • Calibrated ±4% of torque reading clockwise at 20% to 100% of full scale
$2,299.00
View Item
Special for this item!
Proto Tool J6061CX 1/4" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb
Proto Tools Logo

Proto Tool J6061CX 1/4" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb J6061CX

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$157.95
View Item
Special for this item!
Proto Tool J6063CX 3/8" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb
Proto Tools Logo

Proto Tool J6063CX 3/8" Dr Fixed Head Micrometer Torque Wrench 40-200 in-lb J6063CX

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$163.17
View Item
Special for this item!
Proto Tool J6065CX 3/8" Drive Fixed Head Micrometer Torque Wrench
Proto Tools Logo

Proto Tool J6065CX 3/8" Drive Fixed Head Micrometer Torque Wrench J6065CX

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$173.23
View Item
Special for this item!
Proto Tool J6065CXCERT 3/8" Drive Fixed Head Torque Wrench Certified
Proto Tools Logo

Proto Tool J6065CXCERT 3/8" Drive Fixed Head Torque Wrench Certified J6065CXCERT

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Manufactured to meet precision/highly accurate applications such as military and aerospace
$187.85
View Item
Special for this item!
Proto Tool J6113NMF 3/8" Drive Drive Dial Torque Wrench 14-70Nm, 10-50 ft-lb
Proto Tools Logo

Proto Tool J6113NMF 3/8" Drive Drive Dial Torque Wrench 14-70Nm, 10-50 ft-lb J6113NMF

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$168.21
View Item
Special for this item!
Proto Tool J6121NMF 1/2" Dr Dr Dial Torque Wrench 50-250 Nm, 35-175 ft-lb
Proto Tools Logo

Proto Tool J6121NMF 1/2" Dr Dr Dial Torque Wrench 50-250 Nm, 35-175 ft-lb J6121NMF

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$185.26
View Item
Special for this item!
Proto Tool J6169NMF 1/4" Drive Drive Dial Torque Wrench 2-10 Nm, 18-90 in-lb
Proto Tools Logo

Proto Tool J6169NMF 1/4" Drive Drive Dial Torque Wrench 2-10 Nm, 18-90 in-lb J6169NMF

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$166.73
View Item
Special for this item!
Proto Tool J6177NMF 3/8" Dr Dr Dial Torque Wrench 6-30 Nm, 50-250 in-lb
Proto Tools Logo

Proto Tool J6177NMF 3/8" Dr Dr Dial Torque Wrench 6-30 Nm, 50-250 in-lb J6177NMF

  • 2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs
  • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale.
  • Industrial all steel or aluminum torque transfer components.
$166.73
View Item
Special for this item!
Proto Tool JH4-250 1/4" Electronic Interchangeable Head Torque Wrench
Proto Tools Logo

Proto Tool JH4-250 1/4" Electronic Interchangeable Head Torque Wrench JH4-250

  • Full interface with Proto Interchangeable Head Attachments.
  • Broad accuracy range extends from 10% of Full Scale to 100% of Full Scale to help reduce the number of torque wrenches required
  • Ninety-nine -inch on-board-inch memory storage locations help improve efficiency when taking multiple torque readings
$274.09
View Item
Special for this item!
Proto Tool JH5-100F 3/8" Electronic Interchangeable Head Torque Wrench
Proto Tools Logo

Proto Tool JH5-100F 3/8" Electronic Interchangeable Head Torque Wrench JH5-100F

  • Full interface with Proto Interchangeable Head Attachments.
  • Broad accuracy range extends from 10% of Full Scale to 100% of Full Scale to help reduce the number of torque wrenches required
  • Ninety-nine -inch on-board-inch memory storage locations help improve efficiency when taking multiple torque readings
$281.50
View Item
Special for this item!
Proto Tool JH5-6006C 3/8" Electronic Interchangeable Head Trq Wrench
Proto Tools Logo

Proto Tool JH5-6006C 3/8" Electronic Interchangeable Head Trq Wrench JH5-6006C

  • Full interface with Proto Interchangeable Head Attachments
  • Accuracy of +/-4% CW and +/-6% CCW
  • Meets or exceeds ASME B107.14M specification
$204.11
View Item
Special for this item!
Proto Tool JH7-6014C 1/2" Micrometer Interchangeable Head Trq Wrench
Proto Tools Logo

Proto Tool JH7-6014C 1/2" Micrometer Interchangeable Head Trq Wrench JH7-6014C

  • Full interface with Proto Interchangeable Head Attachments
  • Accuracy of +/-4-Percent CW and +/-6-Percent CCW
  • Two sizes available
$225.67
View Item
Special for this item!

View discontinued Torque Wrenches

Proto Tool  Fixed Head Micrometer Torque Wrenches - IN-LBS
Proto Tools Logo

Proto Tool Fixed Head Micrometer Torque Wrenches - IN-LBS

  • Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction.
  • Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
  • Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology).
Top Sellers in This Category

Online Order Status

Use our new online utility to track your recently-placed order.

Track Your Order


Instagram Image Facebook ImageTwitter Image


Bill Me Later from Paypal

Tools-Plus.com Customer Comments
MADE IN USA Products