Sait 23455 14" A24R General Purpose Cut-Off Wheel
The 23455 includes:
- 1x SAIT 23455 A24R General Purpose Cut-Off Wheel
- General purpose cut off wheel with aluminum-oxide grain
- Offers clean and consistent cuts in ferrous metal
- Type 1 wheel design provides square, burr-free cuts
- Fiberglass reinforcement allows the wheel to stand up to the toughest applications
- Max RPM: 5,460 RPM
The Sait 23455 cut-off wheel is the definition of consistency. Using the SAIT aluminum oxide grain, it not only lasts longer, but it cuts significantly better than any competition. It will provide clean and easy cuts in ferrous metals, making sure that they are burr-free. Fiberglass backing means that this blade will cut clean the first time, every time.
- Brand: Sait
- Model: 23455
- MPN: 23455
- UPC: 699053234557
- Diameter: 14"
- Width: 1/8"
- Arbor: 20MM
- MAX RPM: 5,460
- Applications: Steel Angle Iron Rebar
- Type: General Purpose Cut-Off Wheel
- Package Qty.: 1
United Abrasives, Inc. warrants that all industrial products it manufactures will be as represented in its catalog and will be free from defects in material and workmanship under normal use for which the product was intended if, but only if, it has been properly stored and used. Our obligation under this Warranty shall be limited to either the exchange of any product proven to be defective under normal use or to refund the purchase price thereof, at our option, within six months from the date of purchase by the original purchaser. The term original purchaser, as used in this Warranty, shall be deemed to mean that person or company to whom the product was originally sold. This remedy is purchaser's exclusive remedy against United Abrasives, Inc. for any damages to either person or property caused by any defect or other failure in the product. Said refund or exchange shall constitute a fulfillment of any and all liabilities of United Abrasives, Inc. with respect to the quality of the product sold by it. All products listed in this catalog must be used in accordance with the safety regulations set by OSHA, by the directive described by the American National Safety Institute B7.1 ("Safety Requirements for the Use, Care and Protection of Abrasive Wheels") and by the American Brush Manufacturers Association. The user of any United Abrasives, Inc. product should be thoroughly familiar with the above safety rules and regulations before use of the product.